syslogd(1M)                  DG/UX 5.4 Rel. 2.01                 syslogd(1M)


NAME
       syslogd - log systems messages

SYNOPSIS
       /etc/syslogd [ -fconfigfile ] [ -mmarkinterval ] [ -ppath ] [ -d ]

DESCRIPTION
       Syslogd reads and logs messages into a set of files described by the
       configuration file /etc/syslog.conf.  Each message is one line.  A
       message can contain a priority code, marked by a number in angle
       braces at the beginning of the line.  Priorities are defined in
       <sys/syslog.h>.  Syslogd reads from the UNIX domain socket
       /dev/syslog, from an Internet domain socket specified in
       /etc/services, and from the special device /dev/error (to read kernel
       messages).

       Syslogd configures when it starts up and whenever it receives a
       hangup signal.  Lines in the configuration file have a selector to
       determine the message priorities to which the line applies and an
       action.  The action field are separated from the selector by one or
       more tabs.

       Selectors are semicolon separated lists of priority specifiers.  Each
       priority has a facility describing the part of the system that
       generated the message, a dot, and a level indicating the severity of
       the message.  Symbolic names may be used.  An asterisk selects all
       facilities.  All messages of the specified level or higher (greater
       severity) are selected.  More than one facility may be selected using
       commas to separate them.  For example:

            *.emerg;mail,daemon.crit

       Selects all facilities at the emerg level and the mail and daemon
       facilities at the crit level.

       Known facilities and levels recognized by syslogd are those listed in
       syslog(3C) without the leading ``LOG_''.  The additional facility
       ``mark'' has a message at priority LOG_INFO sent to it every 20
       minutes (this may be changed with the -m flag).  The ``mark''
       facility is not enabled by a facility field containing an asterisk.
       The level ``none'' may be used to disable a particular facility.  For
       example,

            *.debug;mail.none

       Sends all messages except mail messages to the selected file.

       The second part of each line describes where the message is to be
       logged if this line is selected.  There are four forms:

       ⊕  A filename (beginning with a leading slash).  The file will be
          opened in append mode.

       ⊕  A hostname preceeded by an at sign (``@'').  Selected messages are



Licensed material--property of copyright holder(s)                         1

syslogd(1M)                  DG/UX 5.4 Rel. 2.01                 syslogd(1M)


          forwarded to the syslogd on the named host.

       ⊕  A comma separated list of users.  Selected messages are written to
          those users if they are logged in.

       ⊕  An asterisk.  Selected messages are written to all logged-in
          users.

       Blank lines and lines beginning with # are ignored.

   Options
       -f   Specify an alternate configuration file.

       -m   Select the number of minutes between mark messages.

       -p   Specify an alternate UNIX domain socket.

       -d   Turn on debugging.

   Terminating syslogd
       Syslogd creates the file /etc/syslog.pid, if possible, containing a
       single line with its process id.  This can be used to kill or
       reconfigure syslogd.

       To bring syslogd down, it should be sent a terminate signal (e.g.
       kill `cat /etc/syslog.pid`).

EXAMPLE
       The configuration file:

           kern,mark.debug        /dev/syscon
           *.notice;mail.info     /usr/spool/adm/syslog
           *.crit                 /usr/adm/critical
           kern.err               @ucbarpa
           *.emerg                *
           *.alert                eric,kridle
           *.alert;auth.warning   ralph

       logs all kernel messages and 20 minute marks onto the system console,
       all notice (or higher) level messages and all mail system messages
       except debug messages into the file /usr/spool/adm/syslog, and all
       critical messages into /usr/adm/critical; kernel messages of error
       severity or higher are forwarded to ucbarpa.  All users will be
       informed of any emergency messages, the users ``eric'' and ``kridle''
       will be informed of any alert messages, and the user ``ralph'' will
       be informed of any alert message, or any warning message (or higher)
       from the authorization system.

FILES
       /etc/syslog.conf    the configuration file
       /etc/syslog.pid     the process id
       /dev/syslog         Name of the UNIX domain datagram log socket
       /dev/error          The kernel log device




Licensed material--property of copyright holder(s)                         2

syslogd(1M)                  DG/UX 5.4 Rel. 2.01                 syslogd(1M)


SEE ALSO
       logger(1), syslog(3C), syslog.conf(5).























































Licensed material--property of copyright holder(s)                         3