index(0) DG/UX 4.30 index(0)
PERMUTED INDEX
l3tol, ltol3: convert between 3-byte integers and long/ .. l3tol(3)
berk_diff3: Berkeley 3-way differential file/ ... berk_diff3(1)
comparison diff3: 3-way differential file .... diff3(1)
long integer and base-64/ a64l, l64a: convert between a64l(3)
abort: generate an IOT fault abort(3C)
absolute value abs, labs: return integer .. abs(3C)
abs, labs: return integer absolute value ............. abs(3C)
/floor, ceiling, remainder, absolute value functions ... floor(3M)
t_accept: accept a connect request ... t_accept(3N)
socket. accept: Accept a connection on a ... accept(2)
a socket. accept: Accept a connection on accept(2)
LP requests accept, reject: allow/prevent accept(1M)
of a file touch: update access and modification times touch(1)
utime: Set file access and modification times. utime(2)
utimes: set file access and modification times utimes(2)
accessibility of a file. access: Determine the ...... access(2)
getgroups: Get group access list. ............... getgroups(2)
initgroups: initialize group access list ................ initgroups(3)
setgroups: Set group access list. ............... setgroups(2)
sputl, sgetl: access long integer data in a/ sputl(3X)
ldfcn: executable file access routines in DG/UX ... ldfcn(4)
trelease: terminate access to a tape ........... trelease(1)
taccess: initiate access to labeled tape ..... taccess(1)
/setutent, endutent, utmpname: access utmp file entry ..... getut(3)
access: Determine the accessibility of a file. ... access(2)
Enable or disable process accounting. acct: ......... acct(2)
acctcon2: connect-time accounting acctcon1, ...... acctcon(1M)
acctprc1, acctprc2: process accounting ................. acctprc(1M)
turnacct: shell procedures for accounting /shutacct, startup, acctsh(1M)
/accton, acctwtmp: overview of accounting and miscellaneous/ acct(1M)
accounting and miscellaneous accounting commands /of ... acct(1M)
diskusg: generate disk accounting data by user id . diskusg(1M)
acct: per-process accounting file format ..... acct(4)
search and print process accounting file(s) acctcom: acctcom(1)
acctmerg: merge or add total accounting files ........... acctmerg(1M)
distinguish between/ holidays: accounting information used to holidays(4)
summary from per-process accounting records /command acctcms(1M)
wtmpfix: manipulate connect accounting records fwtmp, . fwtmp(1M)
runacct: run daily accounting ................. runacct(1M)
process accounting. acct: Enable or disable .... acct(2)
file format acct: per-process accounting acct(4)
per-process accounting/ acctcms: command summary from acctcms(1M)
process accounting file(s) acctcom: search and print .. acctcom(1)
connect-time accounting acctcon1, acctcon2: ........ acctcon(1M)
accounting acctcon1, acctcon2: connect-time ..... acctcon(1M)
acctwtmp: overview of/ acctdisk, acctdusg, accton, acct(1M)
overview of/ acctdisk, acctdusg, accton, acctwtmp: acct(1M)
accounting files acctmerg: merge or add total acctmerg(1M)
acctdisk, acctdusg, accton, acctwtmp: overview of/ acct(1M)
accounting acctprc1, acctprc2: process acctprc(1M)
Licensed material--property of copyright holder(s) Page 1
index(0) DG/UX 4.30 index(0)
acctprc1, acctprc2: process accounting acctprc(1M)
acctdisk, acctdusg, accton, acctwtmp: overview of/ ..... acct(1M)
orderly release/ t_rcvrel: acknowledge receipt of an .. t_rcvrel(3N)
trig: sin, cos, tan, asin, acos, atan, atan2:/ ........ trig(3M)
sigignore: Set the signal action of a signal to/ ..... sigignore(2)
Examine and change signal action. sigaction: ........ sigaction(2)
about the system's currently active processes. /information dg_process_info(2)
killall: kill all active processes ........... killall(1M)
sa1, sa2, sadc: system activity report package .... sar(1M)
sar: system activity reporter .......... sar(1)
current SCCS file editing activity sact: print ...... sact(1)
report process data and system activity /time a command; . timex(1)
cisc: AViiON family SCSI adapter subsystem .......... cisc(7)
insc: AViiON family SCSI adapter subsystem .......... insc(7)
process's set of/ sighold: Add a signal to the calling sighold(2)
interleaved/ swapon: Add a swap device for ...... swapon(2)
queue. insque: Add an element to a circular insque(3C)
sigblock: Add to set of blocked signals. sigblock(2)
acctmerg: merge or add total accounting files . acctmerg(1M)
putenv: change or add value to environment ... putenv(3)
/getexportent, setexportent, addexportent, remexportent,/ exportent(3)
for paging swapon: specify additional DG/UX System device swapon(1M)
getmntent, setmntent, addmntent, endmntent,/ ..... getmntent(3)
/ether_line: Ethernet address mapping operations . ethers(3N)
munlockall: lock or unlock address space mlockall, ... mlockall(3C)
endpoint t_bind: bind an address to a transport ..... t_bind(3N)
allow synchronization of the/ adjtime: correct the time to adjtime(2)
SCCS files admin: create and administer admin(1)
admin: create and administer SCCS files ...... admin(1)
sysadm: menu-driven system administration program ..... sysadm(1M)
dg_flock: apply or remove an advisory lock on an open file/ dg_flock(3C)
cron: clock agent ...................... cron(1M)
alarm: Set a process alarm clock. ............... alarm(2)
clock. alarm: Set a process alarm . alarm(2)
DG/UX valloc: aligned memory allocator in valloc(3)
t_alloc: allocate a library structure t_alloc(3N)
strdup: Copy a string to an allocated area of memory. .. strdup(3C)
brk: Change data segment space allocation ................. brk(2)
cpd: change or view the allocation limits for a/ ... cpd(1)
Change data segment space allocation. memctl: ....... memctl(2)
Change data segment space allocation. sbrk: ......... sbrk(2)
valloc: aligned memory allocator in DG/UX ......... valloc(3)
realloc, calloc: main memory allocator malloc, free, ... malloc(3C)
mallinfo: fast main memory allocator /calloc, mallopt, malloc(3X)
accept, reject: allow/prevent LP requests .. accept(1M)
scandir, alphasort: scan a directory scandir(3)
processes renice: alter priority of running .. renice(1)
context. sigstack: Set and/or get signal stack .... sigstack(2)
sort: sort and/or merge files ......... sort(1)
reading and writing IBM and ANSI tapes /commands for .. reelexchange_intro(1)
introduction to commands and application programs intro: intro(1)
maintenance commands and application programs /system intro(1M)
Licensed material--property of copyright holder(s) Page 2
index(0) DG/UX 4.30 index(0)
lock on an open/ dg_flock: apply or remove an advisory dg_flock(3C)
maintainer for portable/ ar: archive and library .... ar(1)
in DG/UX ar: common archive file format ar(4)
language bc: arbitrary-precision arithmetic bc(1)
for portable archives ar: archive and library maintainer ar(1)
cpio: format of cpio archive .................... cpio(4)
parts of an object or object archive file att_dump: dump att_dump(1)
ar: common archive file format in DG/UX ar(4)
header of a member of an archive file /Read the archive ldahread(3X)
an archive/ ldahread: Read the archive header of a member of ldahread(3X)
tar: tape archiver ................... tar(1)
maintainer for portable archives /archive and library ar(1)
cpio: copy file archives in and out ........ cpio(1)
Copy a string to an allocated area of memory. strdup: ... strdup(3C)
bcopy: Copy bytes from one area to another. ........... bcopy(3C)
bcmp: compare two areas of memory ............ bcmp(3C)
varargs: handle variable argument list .............. varargs(5)
formatted output of a varargs argument list /vsprintf: print vprintf(3S)
formatted input using varargs argument list /convert .... vscanf(3S)
command xargs: construct argument list(s) and execute xargs(1)
getopt: get option letter from argument vector ............ getopt(3)
expr: evaluate arguments as an expression . expr(1)
echo: echo arguments .................. echo(1)
bc: arbitrary-precision arithmetic language ........ bc(1)
multiple precision integer arithmetic /m_out, sdiv, itom: mp(3X)
expr: evaluate arguments as an expression ........... expr(1)
Read Multiple optical device) as magnetic tape /(Write Once wmt(7)
as: MC88000 assembler ...... as(1)
characters asa: interpret ASA carriage control ....... asa(1)
control characters asa: interpret ASA carriage asa(1)
/gmtime, asctime, cftime, ascftime, difftime, mktime,/ ctime(3C)
ascii: map of ASCII character set ........ ascii(5)
set ascii: map of ASCII character ascii(5)
long integer and base-64 ASCII string /convert between a64l(3)
ctime, localtime, gmtime, asctime, cftime, ascftime,/ ctime(3C)
trig: sin, cos, tan, asin, acos, atan, atan2:/ .. trig(3M)
output a.out: common assembler and link editor .. a.out(4)
as: MC88000 assembler .................. as(1)
sifilter: preprocess MC88100 assembly language .......... sifilter(1)
assertion assert: verify program ..... assert(3X)
assert: verify program assertion .................. assert(3X)
stream setbuffer: Assign a buffer to a specified setbuffer(3C)
setbuf, setvbuf: assign buffering to a stream setbuf(3S)
specified stream setlinebuf: Assign line buffering for a setlinebuf(3C)
close: Close an object associated with a file/ .... close(2)
cuserid: get the user name associated with the current/ cuserid(3S)
server for NFS client/ async_daemon: Starts a BIOD async_daemon(2)
AViiON family intelligent asynchronous controller syac: syac(7)
nice: run a command at a higher or lower priority nice(1)
batch: execute DG/UX commands at a later time at, ....... at(1)
commands at a later time at, batch: execute DG/UX ... at(1)
setting up an environment at login time profile: .... profile(4)
Licensed material--property of copyright holder(s) Page 3
index(0) DG/UX 4.30 index(0)
transport/ t_look: look at the current event on a .. t_look(3N)
/sin, cos, tan, asin, acos, atan, atan2: trigonometric/ trig(3M)
/cos, tan, asin, acos, atan, atan2: trigonometric functions trig(3M)
routine atexit: register termination atexit(3C)
double-precision/ strtod, atof: convert string to .... strtod(3C)
strtol, strtoul, atol, atoi: convert string to/ ... strtol(3C)
integer strtol, strtoul, atol, atoi: convert string to strtol(3C)
modes modemap: mapping of AT&T and Berkeley terminal . modemap(7)
termio: AT&T terminal interface .... termio(7)
shmat: attach a shared memory segment shmat(2)
object or object archive file att_dump: dump parts of an . att_dump(1)
/Get or set message queue attributes or destroy a/ ... msgctl(2)
rcs: change RCS file attributes ................. rcs(1)
a terminal att_stty: set the options for att_stty(1)
auth_destroy, authnone_create, authdes_create,/ ........... rpc(3N)
/authdes_create, authdes_getucred,/ ......... rpc(3N)
authdes_create,/ auth_destroy, authnone_create, rpc(3N)
authdes_create,/ auth_destroy, authnone_create, ........... rpc(3N)
/authdes_getucred, authunix_create,/ .......... rpc(3N)
callrpc,/ /authunix_create, authunix_create_default, ... rpc(3N)
exportfs: Make a directory available for mounting via/ exportfs(2)
graphics processor grfx: AViiON 300 series workstation grfx(7)
system keyboard kbd: AViiON 300 series workstation kbd(7)
system: format of DGC AViiON computer system/ .... system(4)
cied: AViiON family disk subsystem cied(7)
cimd: AViiON family disk subsystem cimd(7)
cird: AViiON family disk subsystem cird(7)
sd: AViiON family disk subsystem sd(7)
asynchronous controller syac: AViiON family intelligent .. syac(7)
special files lp: DGC AViiON family line printer . lp(7)
subsystem cisc: AViiON family SCSI adapter . cisc(7)
subsystem insc: AViiON family SCSI adapter . insc(7)
st: AViiON family tape subsystem st(7)
wait: await completion of process wait(1)
processing language awk: pattern scanning and .. awk(1)
ungetc: push character back into input stream ..... ungetc(3S)
dump2: incremental file system backup ..................... dump2(1M)
DG/UX system file system backup /tapesave: daily/weekly filesave(1M)
frec: recover files from a backup tape ................ frec(1M)
banner: make posters ....... banner(1)
printer capability data base printcap: ............ printcap(5)
development environment data base sdetab: software ..... sdetab(4)
firstkey, nextkey: data base subroutines /delete, . dbm(3X)
dbm_error, dbm_clearerr: data base subroutines /dbm_nextkey, ndbm(3)
terminal capability data base termcap: ............. termcap(5)
between long integer and base-64 ASCII string /convert a64l(3)
(visual) display editor based on ex /screen-oriented vi(1)
portions of path names basename, dirname: deliver . basename(1)
at a later time at, batch: execute DG/UX commands at(1)
/cfsetispeed, cfsetospeed: Baud rate functions. ....... cfsetospeed(3)
arithmetic language bc: arbitrary-precision .... bc(1)
memory bcmp: compare two areas of . bcmp(3C)
Licensed material--property of copyright holder(s) Page 4
index(0) DG/UX 4.30 index(0)
area to another. bcopy: Copy bytes from one . bcopy(3C)
passwd, protocols, group or/ bcs_cat: type hosts, networks, bcs_cat(1M)
bdiff: big diff ............ bdiff(1)
cb: C program beautifier ................. cb(1)
user su: become super-user or another su(1)
starter: information for beginning users ............ starter(1)
differential file and/ berk_diff: Berkeley ........ berk_diff(1)
differential file comparison berk_diff3: Berkeley 3-way . berk_diff3(1)
file comparison berk_diff3: Berkeley 3-way differential berk_diff3(1)
directory/ berk_diff: Berkeley differential file and berk_diff(1)
modemap: mapping of AT&T and Berkeley terminal modes .... modemap(7)
re_exec: regular expression/ berk_regex, regex, re_comp, berk_regex(3)
simplified software signal/ berk_signal, signal: ....... berk_signal(3)
signals and suspend the/ berk_sigpause: Set blocked . berk_sigpause(2)
options berk_stty: set terminal .... berk_stty(1)
j0, j1, jn, y0, y1, yn: Bessel functions ........... bessel(3M)
srandom, initstate, setstate: better random number/ random, random(3)
bfs: big file scanner ...... bfs(1)
bdiff: big diff ................... bdiff(1)
bfs: big file scanner ........... bfs(1)
whereis: locate source, binary, and or manual for/ . whereis(1)
via/ /uudecode: encode/decode a binary file for transmission uuencode(1)
strings in an object or other binary file /the printable strings(1)
fread, fwrite: binary input/output ........ fread(3S)
bsearch: binary search a sorted table bsearch(3C)
tfind, tdelete, twalk: manage binary search trees tsearch, tsearch(3)
bind: Bind a name to a socket. ... bind(2)
endpoint t_bind: bind an address to a transport t_bind(3N)
bind: Bind a name to a socket. bind(2)
async_daemon: Starts a BIOD server for NFS client/ async_daemon(2)
the position of the first set bit in an integer. /Return ffs(3C)
reset: reset the teletype bits to a sensible state ... reset(1)
sum: print checksum and block count of a file ...... sum(1)
dsk: block special disk interface dsk(7)
process/ sigpause: Clear a blocked signal and suspend the sigpause(2)
the/ berk_sigpause: Set blocked signals and suspend berk_sigpause(2)
sigblock: Add to set of blocked signals. ........... sigblock(2)
the calling process's set of blocked signals. /a signal to sighold(2)
Examine and change blocked signals. sigprocmask: sigprocmask(2)
the calling process's set of blocked signals. /signal from sigrelse(2)
sigsetmask: Specify set of blocked signals. ........... sigsetmask(2)
deblock: change blocking size .............. deblock(1)
df: report number of free disk blocks and inodes .......... df(1M)
/Synchronously read data blocks from a file without/ dg_unbuffered_read(2)
plock: Lock data, text, or both into memory. .......... plock(2)
allocation brk: Change data segment space brk(2)
tty: BSD terminal interface ..... tty(7)
sorted table bsearch: binary search a ... bsearch(3C)
setbuffer: Assign a buffer to a specified stream setbuffer(3C)
stdio: standard buffered input/output package stdio(3S)
from a file without system buffering /read data blocks dg_unbuffered_read(2)
data to a file without system buffering /Synchronously write dg_unbuffered_write(2)
Licensed material--property of copyright holder(s) Page 5
index(0) DG/UX 4.30 index(0)
setlinebuf: Assign line buffering for a specified/ . setlinebuf(3C)
setbuf, setvbuf: assign buffering to a stream ...... setbuf(3S)
process normally. exit: Flush buffers and terminate the .. exit(3C)
sccstorcs: build RCS file from SCCS file sccstorcs(1)
mknod: build special file ......... mknod(1M)
between host and network byte order /convert values byteorder(3N)
another. bcopy: Copy bytes from one area to ..... bcopy(3C)
the bytes within each pair of bytes in a string. swab: Swap swab(3C)
bytes in a/ swab: Swap the bytes within each pair of .. swab(3C)
memory. bzero: Zero a portion of ... bzero(3C)
cflow: generate C flow graph ............... cflow(1)
cc: C language compiler ........ cc(1)
gcc: GNU C language compiler ........ gcc(1)
cpp: the C language preprocessor .... cpp(1)
main: Enter a C main program. ............ main(3C)
cb: C program beautifier ....... cb(1)
lint: a C program checker .......... lint(1)
cxref: generate C program cross-reference .. cxref(1)
ctrace: C program debugger ......... ctrace(1)
xstr: extract strings from C programs to implement shared/ xstr(1)
message file by massaging C source /create an error . mkstr(1)
cal: print calendar ........ cal(1)
dc: desk calculator ................. dc(1)
cal: print calendar ................... cal(1)
calendar: reminder service . calendar(1)
cu: call another UNIX system ... cu(1)
data returned by stat system call stat: ................ stat(5)
/This routine supplies the caller with certain system/ dg_sys_info(2)
the working directory of the calling process. /Change .. chdir(2)
the root directory of the calling process. /Changes . chroot(2)
sighold: Add a signal to the calling process's set of/ .. sighold(2)
/Remove a signal from the calling process's set of/ .. sigrelse(2)
malloc, free, realloc, calloc: main memory allocator malloc(3C)
fast/ malloc, free, realloc, calloc, mallopt, mallinfo: . malloc(3X)
/authunix_create_default, callrpc, clnt_broadcast,/ .. rpc(3N)
intro: introduction to system calls and error numbers .... intro(2)
link and unlink system calls link, unlink: exercise link(1M)
routines for remote procedure calls /library ............ rpc(3N)
open files the current process can have. /the number of .. getdtablesize(2)
to an LP line printer lp, cancel: send/cancel requests lp(1)
printcap: printer capability data base ....... printcap(5)
termcap: terminal capability data base ....... termcap(5)
terminfo: terminal and printer capability database ........ terminfo(4)
description into a terminfo/ captoinfo: convert a termcap captoinfo(1M)
asa: interpret ASA carriage control characters asa(1)
text editor (variant of ex for casual users) edit: ....... edit(1)
files to standard output cat: concatenate and type .. cat(1)
the process until a signal is caught. /signals and suspend berk_sigpause(2)
process until a signal is caught. pause: Suspend .... pause(2)
the process until a signal is caught. /signal and suspend sigpause(2)
cb: C program beautifier ... cb(1)
cc: C language compiler .... cc(1)
Licensed material--property of copyright holder(s) Page 6
index(0) DG/UX 4.30 index(0)
cd: change working directory cd(1)
commentary of an SCCS delta cdc: change the delta ...... cdc(1)
ceiling, remainder,/ floor, ceil, fmod, fabs: floor, ... floor(3M)
/ceil, fmod, fabs: floor, ceiling, remainder, absolute/ floor(3M)
open/ poll: Check whether certain conditions exist on poll(2)
/supplies the caller with certain system information. dg_sys_info(2)
cfsetispeed, cfsetospeed:/ cfgetispeed, cfgetospeed, .. cfsetospeed(3)
cfsetospeed:/ cfgetispeed, cfgetospeed, cfsetispeed, .. cfsetospeed(3)
cflow: generate C flow graph cflow(1)
cfgetispeed, cfgetospeed, cfsetispeed, cfsetospeed: Baud/ cfsetospeed(3)
/cfgetospeed, cfsetispeed, cfsetospeed: Baud rate/ .... cfsetospeed(3)
/localtime, gmtime, asctime, cftime, ascftime, difftime,/ ctime(3C)
strings cftime: language specific .. cftime(4)
sigprocmask: Examine and change blocked signals. .... sigprocmask(2)
deblock: change blocking size ....... deblock(1)
allocation brk: Change data segment space .. brk(2)
allocation. memctl: Change data segment space .. memctl(2)
allocation. sbrk: Change data segment space .. sbrk(2)
passwd: change login password ...... passwd(1)
chmod: Change mode of file. ....... chmod(2)
fchmod: Change mode of file. ....... fchmod(2)
current position. lseek: Change object pointer's .... lseek(2)
environment putenv: change or add value to ..... putenv(3)
limits for a control/ cpd: change or view the allocation cpd(1)
chown, chgrp: change owner or group ...... chown(1)
nice: Change priority of a process. nice(2)
rcs: change RCS file attributes . rcs(1)
command chroot: change root directory for a chroot(1M)
sigaction: Examine and change signal action. ...... sigaction(2)
shutdown: shut down system, change system state ........ shutdown(1M)
an SCCS delta cdc: change the delta commentary of cdc(1)
file newform: change the format of a text newform(1)
chmod: change the mode of a file .. chmod(1)
rename: Change the name of a file. . rename(2)
a control/ dg_set_cpd_limits: Change the resource limits of dg_set_cpd_limits(2)
of the calling/ chdir: Change the working directory chdir(2)
delta: make a delta (change) to an SCCS file ... delta(1)
a file. chown: Change user id and group id of chown(2)
a file. fchown: Change user id and group id of fchown(2)
cd: change working directory ... cd(1)
the calling process. chroot: Changes the root directory of chroot(2)
database helpadm: make changes to the Help Facility helpadm(1M)
number generator; routines for changing generators /random random(3)
pipe: Create an interprocess channel. ................... pipe(2)
stream ungetc: push character back into input .. ungetc(3S)
conversion/ chrtbl: generate character classification and chrtbl(1M)
and/ eqnchar: special equation character definitions for eqn eqnchar(5)
_toupper, setchrclass: character handling /_tolower, ctype(3C)
for the first occurrence of a character in a string. /Search index(3C)
for the last occurrence of a character in a string. /Search rindex(3C)
ishex: Determine if a character is hexadecimal. .. ishex(3C)
user sysv3_cuserid: get character login name of the sysv3_cuserid(3S)
Licensed material--property of copyright holder(s) Page 7
index(0) DG/UX 4.30 index(0)
/getchar, fgetc, getw: get character or word from a/ .. getc(3S)
/putchar, fputc, putw: put character or word on a stream putc(3S)
ascii: map of ASCII character set .............. ascii(5)
interface rdsk: character special disk ..... rdsk(7)
tape interface rmt: character special magnetic . rmt(7)
interpret ASA carriage control characters asa: ........... asa(1)
file rev: reverse order of characters in each line of . rev(1)
tr: translate characters ................. tr(1)
lastlogin, monacct, nulladm,/ chargefee, ckpacct, dodisk, acctsh(1M)
directory of the calling/ chdir: Change the working .. chdir(2)
/DG/UX file system consistency check and interactive repair fsck(1M)
ci: check in RCS revisions ..... ci(1)
co: check out RCS revisions .... co(1)
permissions file uucheck: check the uucp directories and uucheck(1M)
conditions exist on/ poll: Check whether certain ...... poll(2)
lint: a C program checker .................... lint(1)
grpck: password/group file checkers pwck, ............ pwck(1M)
copy file systems with label checking volcopy, labelit: volcopy(1M)
systems processed by fsck and/ checklist: list of file .... checklist(4)
formatted with mm macros, eqn/ checkmm: checks documents .. checkmm(1)
with mm macros, eqn/ checkmm: checks documents formatted . checkmm(1)
file sum: print checksum and block count of a sum(1)
chown, chgrp: change owner or group chown(1)
version of a terminfo entry chgtinfo: create a temporary chgtinfo(1)
times: Get process and child process times. ....... times(2)
terminate. wait3: Wait for child process to stop or ... wait3(2)
wait4: Wait for the specified child process to stop or/ .. wait4(2)
chmod: Change mode of file. chmod(2)
file chmod: change the mode of a chmod(1)
group id of a file. chown: Change user id and .. chown(2)
group chown, chgrp: change owner or chown(1)
for a command chroot: change root directory chroot(1M)
directory of the calling/ chroot: Changes the root ... chroot(2)
classification and conversion/ chrtbl: generate character . chrtbl(1M)
ci: check in RCS revisions . ci(1)
subsystem cied: AViiON family disk ... cied(7)
subsystem cimd: AViiON family disk ... cimd(7)
insque: Add an element to a circular queue. ............ insque(3C)
Remove an element from a circular queue. remque: ... remque(3C)
subsystem cird: AViiON family disk ... cird(7)
adapter subsystem cisc: AViiON family SCSI ... cisc(7)
monacct, nulladm,/ chargefee, ckpacct, dodisk, lastlogin, acctsh(1M)
chrtbl: generate character classification and conversion/ chrtbl(1M)
strclean: STREAMS error logger cleanup program ............ strclean(1M)
uucp spool directory clean-up uucleanup: ....... uucleanup(1M)
suspend the process/ sigpause: Clear a blocked signal and . sigpause(2)
clear: clear terminal screen clear(1)
clri: clear inode ................ clri(1M)
clear: clear terminal screen ...... clear(1)
status/ ferror, feof, clearerr, fileno: stream ... ferror(3S)
/ypprot_err: Yellow Pages client interface ........... ypclnt(3N)
/Starts a BIOD server for NFS client requests. ........... async_daemon(2)
Licensed material--property of copyright holder(s) Page 8
index(0) DG/UX 4.30 index(0)
locks held by remote lock clients. dg_lock_kill: Remove dg_lock_kill(2)
dg_setsecretkey: Store a client's secret key in the/ dg_setsecretkey(2)
/a conversation key with the client/server common key. .. dg_decryptsessionkey(2)
/a conversation key with the client/server common key. .. dg_encryptsessionkey(2)
(command interpreter) having a C-like syntax /invoke a shell csh(1)
clnt_destroy,/ /callrpc, clnt_broadcast, clnt_call, . rpc(3N)
/callrpc, clnt_broadcast, clnt_call, clnt_destroy,/ .. rpc(3N)
/clnt_destroy, clnt_create, clnt_control, clnt_freeres,/ rpc(3N)
/clnt_call, clnt_destroy, clnt_create, clnt_control,/ rpc(3N)
/clnt_broadcast, clnt_call, clnt_destroy, clnt_create,/ rpc(3N)
/clnt_create, clnt_control, clnt_freeres, clnt_geterr,/ rpc(3N)
clnt_control, clnt_freeres, clnt_geterr,/ /clnt_create, rpc(3N)
/clnt_freeres, clnt_geterr, clnt_pcreateerror,/ ........ rpc(3N)
/clnt_pcreateerror, clnt_perrno, clnt_perror,/ . rpc(3N)
/clnt_perrno, clnt_perror,/ .............. rpc(3N)
/clnt_sperrno, clnt_sperror, clntraw_create,/ ........... rpc(3N)
/clnt_perrno, clnt_perror, clnt_spcreateerror,/ ....... rpc(3N)
/clnt_spcreateerror, clnt_sperrno, clnt_sperror,/ rpc(3N)
clnttcp_create,/ /clnt_sperrno, clnt_sperror, clntraw_create, rpc(3N)
clnt_sperror, clntraw_create, clnttcp_create,/ /clnt_sperrno, rpc(3N)
/clnttcp_create, clntudp_create, host2netname,/ rpc(3N)
synchronization of the system clock /the time to allow .. adjtime(2)
cron: clock agent ................ cron(1M)
alarm: Set a process alarm clock. ..................... alarm(2)
clock: report CPU time used clock(3C)
on a STREAMS driver clone: open any minor device clone(7)
t_close: close a transport endpoint . t_close(3N)
with a file/ close: Close an object associated . close(2)
ldclose, ldaclose: close an object file ....... ldclose(3X)
associated with a file/ close: Close an object ..... close(2)
fclose, fflush: close or flush a stream .... fclose(3S)
/telldir, seekdir, rewinddir, closedir: directory operations directory(3X)
system log syslog, openlog, closelog, setlogmask: control syslog(3)
clri: clear inode .......... clri(1M)
cmp: compare two files ..... cmp(1)
co: check out RCS revisions co(1)
dis: object code disassembler .......... dis(1)
corresponding to an error code. /Return a string .... strerror(3C)
col: filter reverse line-feeds col(1)
comb: combine SCCS deltas .. comb(1)
comb: combine SCCS deltas ........ comb(1)
common to two sorted files comm: select or reject lines comm(1)
priority nice: run a command at a higher or lower nice(1)
change root directory for a command chroot: ........... chroot(1M)
examples usage: retrieve a command description and usage usage(1)
env: set environment for command execution .......... env(1)
uux: UNIX-to-UNIX system command execution .......... uux(1)
quits nohup: run a command immune to hangups and nohup(1)
C-like/ csh: invoke a shell (command interpreter) having a csh(1)
editread: command line editor ........ editread(5)
getopt: parse command options ............ getopt(1)
getopts, getoptcvt: parse command options ............ getopts(1)
Licensed material--property of copyright holder(s) Page 9
index(0) DG/UX 4.30 index(0)
sh, rsh: shell, the command programming language sh(1)
and system/ timex: time a command; report process data timex(1)
uuxqt: execute remote command requests ........... uuxqt(1M)
return stream to a remote command rexec: ............ rexec(3X)
per-process/ acctcms: command summary from ....... acctcms(1M)
system: issue a shell command .................... system(3S)
test: condition evaluation command .................... test(1)
time: time a command .................... time(1)
locate: identify a command using keywords ..... locate(1)
argument list(s) and execute command xargs: construct .. xargs(1)
and miscellaneous accounting commands /of accounting ... acct(1M)
intro: introduction to commands and application/ .. intro(1)
/to system maintenance commands and application/ .. intro(1M)
at, batch: execute DG/UX commands at a later time ... at(1)
writing IBM and/ REELexchange: commands for reading and ... reelexchange_intro(1)
install: install commands ................... install(1M)
rcsintro: introduction to RCS commands ................... rcsintro(1)
streamio: STREAMS ioctl commands ................... streamio(7)
development/ sde-target: Print commands to reset software . sde-target(1)
cdc: change the delta commentary of an SCCS delta cdc(1)
DG/UX ar: common archive file format in ar(4)
editor output a.out: common assembler and link .. a.out(4)
key with the client/server common key. /a conversation dg_decryptsessionkey(2)
key with the client/server common key. /a conversation dg_encryptsessionkey(2)
cprs: compress a common object file ......... cprs(1)
/line number entries of a common object file function ldlread(3X)
entries of a section of a common object file /number ldlseek(3X)
entries of a section of a common object file /relocation ldrseek(3X)
/section header of a common object file ......... ldshread(3X)
an indexed/named section of a common object file /seek to ldsseek(3X)
nm: print name list of common object file ......... nm(1)
relocation information for a common object file reloc: . reloc(4)
table format syms: common object file symbol .. syms(4)
filehdr: file header for common object files ........ filehdr(4)
ld: link editor for common object files ........ ld(1)
size: print section sizes of common object files ........ size(1)
glossary: definitions of common terms and symbols ... glossary(1)
comm: select or reject lines common to two sorted files . comm(1)
ipcs: report inter-process communication facilities/ .. ipcs(1)
ftok: standard interprocess communication package ...... stdipc(3C)
socket: Create an endpoint for communication. ............. socket(2)
in DG/UX unix_ipc: piping communications within a host unix_ipc(6F)
file and directory comparator /differential .. berk_diff(1)
diff: differential file comparator ................. diff(1)
descriptions infocmp: compare or print out terminfo infocmp(1M)
rcsdiff: compare RCS revisions ...... rcsdiff(1)
bcmp: compare two areas of memory bcmp(3C)
cmp: compare two files .......... cmp(1)
SCCS file sccsdiff: compare two versions of an . sccsdiff(1)
3-way differential file comparison /Berkeley ...... berk_diff3(1)
diff3: 3-way differential file comparison ................. diff3(1)
dircmp: directory comparison ................. dircmp(1)
Licensed material--property of copyright holder(s) Page 10
index(0) DG/UX 4.30 index(0)
expression regcmp, regex: compile and execute regular regcmp(3X)
regexp: regular expression compile and match routines . regexp(5)
cc: C language compiler ................... cc(1)
gcc: GNU C language compiler ................... gcc(1)
regcmp: regular expression compiler ................... regcmp(1)
sno: SNOBOL interpreter and compiler ................... sno(1)
tic: terminfo compiler ................... tic(1M)
zic: time zone compiler ................... zic(1M)
yacc: yet another compiler-compiler .......... yacc(1)
erf, erfc: error function and complementary error function erf(3M)
delayed lock requests to complete. /Wait for previously dg_lock_wait(2)
wait: await completion of process ...... wait(1)
cprs: compress a common object file cprs(1)
pack, pcat, unpack: compress and expand files .. pack(1)
entry of an object/ ldtbindex: compute index of symbol table ldtbindex(3X)
div, ldiv: compute quotient and remainder div(3C)
system: format of DGC AViiON computer system description/ system(4)
standard output cat: concatenate and type files to cat(1)
test: condition evaluation command test(1)
poll: Check whether certain conditions exist on open/ .. poll(2)
select: Wait for I/O conditions. ................ select(2)
syslogd system log/ syslog. conf: configuration file for syslog.conf(5)
config: configure a system . config(1M)
pathconf, fpathconf: Get configurable pathname/ ..... pathconf(2)
sysconf: Get configurable system variables. sysconf(2)
system log/ syslog.conf: configuration file for syslogd syslog.conf(5)
config: configure a system ......... config(1M)
system lpadmin: configure the LP spooling .. lpadmin(1M)
t_rcvconnect: receive the confirmation from a connect/ t_rcvconnect(3N)
fwtmp, wtmpfix: manipulate connect accounting records . fwtmp(1M)
on a socket. connect: Initiate a connection connect(2)
t_accept: accept a connect request ............ t_accept(3N)
t_listen: listen for a connect request ............ t_listen(3N)
the confirmation from a connect request /receive .. t_rcvconnect(3N)
getpeername: Get name of connected peer. ............ getpeername(2)
socketpair: Create a pair of connected sockets. ......... socketpair(2)
an out-going terminal line connection dial: establish dial(3C)
accept: Accept a connection on a socket. .... accept(2)
connect: Initiate a connection on a socket. .... connect(2)
down part of a full-duplex connection. shutdown: Shut shutdown(2)
or expedited data sent over a connection /receive data .. t_rcv(3N)
data or expedited data over a connection t_snd: send .... t_snd(3N)
t_connect: establish a connection with another/ ... t_connect(3N)
listen: Listen for connections on a socket. ... listen(2)
acctcon1, acctcon2: connect-time accounting .... acctcon(1M)
fsck: DG/UX file system consistency check and/ ..... fsck(1M)
syscon: DG/UX operating system console pseudo-device ...... syscon(7)
for implementation-specific constants limits: file header limits(4)
math: math functions and constants .................. math(5)
execute command xargs: construct argument list(s) and xargs(1)
nroff/troff, tbl, and eqn constructs deroff: remove . deroff(1)
getrlimit: Get system resource consumption limits. ........ getrlimit(2)
Licensed material--property of copyright holder(s) Page 11
index(0) DG/UX 4.30 index(0)
setrlimit: Set system resource consumption limits. ........ setrlimit(2)
maximum system resource consumption vlimit: control vlimit(3C)
debugging on Uutry: try to contact remote system with . uutry(1M)
/the process state to that contained in a signal frame. sigret(2)
handle of the export entry containing filename. /file getfh(2)
/directory and master files containing device information master(4)
readlink: Read the contents of a symbolic link. readlink(2)
ls: list contents of directory ...... ls(1)
getpsr: Return the current contents of the processor/ . getpsr(2)
tsniff: summary report of tape contents ................... tsniff(1)
Set and/or get signal stack context. sigstack: ........ sigstack(2)
csplit: context split .............. csplit(1)
asa: interpret ASA carriage control characters ......... asa(1)
ioctl: Control device. ............ ioctl(2)
jobs: summary of job control facilities in DG/UX jobs(3)
fcntl: File descriptor control. ................... fcntl(2)
floating-point environment control /fpsetsticky: IEEE fpgetround(3C)
/tcdrain, tcflush, tcflow: Line control functions. ......... tcflush(3)
init, telinit: process control initialization ..... init(1M)
resource consumption vlimit: control maximum system ..... vlimit(3C)
memcntl: memory management control .................... memcntl(2)
semctl: Semaphore control operations. ........ semctl(2)
shmctl: Shared memory control operations. ........ shmctl(2)
fcntl: file control options ............ fcntl(5)
the allocation limits for a control point directory /view cpd(1)
/the resource limits of a control point directory. ... dg_set_cpd_limits(2)
lpc: line printer control program ............ lpc(8)
Set process group ID for job control. setpgid: ......... setpgid(2)
openlog, closelog, setlogmask: control system log syslog, syslog(3)
devtty: control terminal pseudo-device devtty(7)
Virtually hang up the current control terminal. vhangup: vhangup(2)
uucp status inquiry and job control uustat: ........... uustat(1)
vc: version control .................... vc(1)
tcload: load terminal controller devices ......... tcload(1M)
intelligent asynchronous controller /AViiON family . syac(7)
terminals term: conventional names for ..... term(5)
client/server/ /Decrypt a conversation key with the .. dg_decryptsessionkey(2)
client/server/ /Encrypt a conversation key with the .. dg_encryptsessionkey(2)
units: conversion program ......... units(1)
character classification and conversion tables /generate chrtbl(1M)
strftime, tzset: date and time conversions /difftime, mktime, ctime(3C)
into a terminfo/ captoinfo: convert a termcap description captoinfo(1M)
dd: convert and copy a file .... dd(1)
integers and/ l3tol, ltol3: convert between 3-byte ..... l3tol(3)
and base-64 ASCII/ a64l, l64a: convert between long integer a64l(3)
to string ecvt, fcvt, gcvt: convert floating-point number ecvt(3)
scanf, fscanf, sscanf: convert formatted input .... scanf(3S)
vscanf, vfscanf, vsscanf: convert formatted input using/ vscanf(3S)
strtod, atof: convert string to/ ......... strtod(3C)
strtol, strtoul, atol, atoi: convert string to integer .. strtol(3C)
htonl, htons, ntohl, ntohs: convert values between host/ byteorder(3N)
dd: convert and copy a file ................ dd(1)
Licensed material--property of copyright holder(s) Page 12
index(0) DG/UX 4.30 index(0)
area of memory. strdup: Copy a string to an allocated strdup(3C)
another. bcopy: Copy bytes from one area to bcopy(3C)
cpio: copy file archives in and out cpio(1)
checking volcopy, labelit: copy file systems with label volcopy(1M)
cp, ln, mv: copy, link or move files ... cp(1)
uuname: UNIX-to-UNIX system copy uucp, uulog, ......... uucp(1)
UNIX-to-UNIX system file copy uuto, uupick: public . uuto(1)
routines finite, unordered, copysign: IEEE floating-point ieeefp(3C)
file core: format of core image . core(4)
core: format of core image file ............ core(4)
synchronization of/ adjtime: correct the time to allow .. adjtime(2)
strerror: Return a string corresponding to an error/ . strerror(3C)
atan2:/ trig: sin, cos, tan, asin, acos, atan, trig(3M)
functions sinh, cosh, tanh: hyperbolic ..... sinh(3M)
sum: print checksum and block count of a file ............ sum(1)
wc: word count ...................... wc(1)
files cp, ln, mv: copy, link or move cp(1)
allocation limits for a/ cpd: change or view the .... cpd(1)
cpio: format of cpio archive ............... cpio(4)
and out cpio: copy file archives in cpio(1)
cpio: format of cpio archive cpio(4)
preprocessor cpp: the C language ........ cpp(1)
file cprs: compress a common object cprs(1)
clock: report CPU time used .............. clock(3C)
crash: examine system images crash(1M)
DG/UX System crashes crash: what to do when the . crash(8)
to do when the DG/UX System crashes crash: what ....... crash(8)
rewrite an existing one. creat: Create a new file or creat(2)
mkdir: Create a directory file. ... mkdir(2)
mkfs, newfs: create a file system ....... mkfs(1M)
dg_mknod: Create a file system node. . dg_mknod(2)
file tmpnam, tempnam: create a name for a temporary tmpnam(3S)
an existing one. creat: Create a new file or rewrite creat(2)
link: Create a new link to a file. link(2)
fork: Create a new process. ...... fork(2)
sockets. socketpair: Create a pair of connected . socketpair(2)
ndx: create a subject-page index ndx(1)
symlink: Create a symbolic link file. symlink(2)
ctags: create a tags file ......... ctags(1)
tmpfile: create a temporary file .... tmpfile(3S)
a terminfo entry chgtinfo: create a temporary version of chgtinfo(1)
communication. socket: Create an endpoint for ..... socket(2)
by massaging C source mkstr: create an error message file mkstr(1)
channel. pipe: Create an interprocess ..... pipe(2)
files admin: create and administer SCCS . admin(1)
group ID. setsid: Create session and set process setsid(2)
umask: Set and get file creation mask. ............. umask(2)
cron: clock agent .......... cron(1M)
crontab: user crontab file in DG/UX ...... crontab(1)
DG/UX crontab: user crontab file in crontab(1)
cxref: generate C program cross-reference ............ cxref(1)
macro files macref: produce cross-reference listing for macref(1)
Licensed material--property of copyright holder(s) Page 13
index(0) DG/UX 4.30 index(0)
pg: file perusal filter for CRT terminals in DG/UX ..... pg(1)
page: file perusal filter for CRT viewing more, ......... more(1)
crypt: encode/decode ....... crypt(1)
encryption functions crypt: password and file ... crypt(3X)
generate hashing encryption crypt, setkey, encrypt: .... crypt(3)
interpreter) having a C-like/ csh: invoke a shell (command csh(1)
locate a program file for csh(1) users which: ....... which(1)
csplit: context split ...... csplit(1)
terminal ct: spawn getty to a remote ct(1)
ctags: create a tags file .. ctags(1)
terminal ctermid: generate filename for ctermid(3S)
asctime, cftime, ascftime,/ ctime, localtime, gmtime, .. ctime(3C)
ctrace: C program debugger . ctrace(1)
cu: call another UNIX system cu(1)
processor/ getpsr: Return the current contents of the .... getpsr(2)
vhangup: Virtually hang up the current control terminal. .. vhangup(2)
uname: print name of current DG/UX system ....... uname(1)
getdomainname: Get name of current domain. ............ getdomainname(2)
setdomainname: Set name of current domain. ............ setdomainname(2)
endpoint t_look: look at the current event on a transport t_look(3N)
Get unique identifier of current host. gethostid: .. gethostid(2)
gethostname: Get name of current host. .............. gethostname(2)
Set unique identifier of current host. sethostid: .. sethostid(2)
sethostname: Set name of current host. .............. sethostname(2)
/Get information about current IPCs state. ........ dg_ipc_info(2)
lseek: Change object pointer's current position. .......... lseek(2)
/the number of open files the current process can have. .. getdtablesize(2)
user name associated with the current process /get the .. cuserid(3S)
the extended errno for the current process. /returns . dg_ext_errno(2)
activity sact: print current SCCS file editing .. sact(1)
interval/ getitimer: get the current state of one of the getitimer(2)
t_getstate: get the current state .............. t_getstate(3N)
uname: Get name of current UNIX system. ....... uname(2)
slot in the utmp file of the current user /find the .... ttyslot(3C)
getcwd: get pathname of current working directory .. getcwd(3C)
pathname getwd: get current working directory .. getwd(3)
/information about the system's currently active processes. dg_process_info(2)
scr_dump: format of curses screen image file. .. scr_dump(4)
handling and optimization/ curses: terminal screen .... curses(3X)
spline: interpolate smooth curve ...................... spline(1G)
associated with the current/ cuserid: get the user name . cuserid(3S)
of each line of a file cut: cut out selected fields cut(1)
each line of a file cut: cut out selected fields of . cut(1)
cross-reference cxref: generate C program .. cxref(1)
lpd: line printer daemon ..................... lpd(8)
nfssvc: Start an NFS daemon on the socket/ ...... nfssvc(2)
rmt: start the remote mag tape daemon ..................... rmt(1M)
strerr: STREAMS error logger daemon ..................... strerr(1M)
file for syslogd system log daemon /configuration ..... syslog.conf(5)
runacct: run daily accounting ........... runacct(1M)
system/ filesave, tapesave: daily/weekly DG/UX system file filesave(1M)
/time a command; report process data and system activity ... timex(1)
Licensed material--property of copyright holder(s) Page 14
index(0) DG/UX 4.30 index(0)
printcap: printer capability data base .................. printcap(5)
development environment data base sdetab: software sdetab(4)
delete, firstkey, nextkey: data base subroutines /store, dbm(3X)
/dbm_error, dbm_clearerr: data base subroutines ...... ndbm(3)
termcap: terminal capability data base .................. termcap(5)
without/ /Synchronously read data blocks from a file .... dg_unbuffered_read(2)
generate disk accounting data by user id diskusg: .. diskusg(1M)
t_rcvuderr: receive a unit data error indication ...... t_rcvuderr(3N)
/sgetl: access long integer data in a machine-independent/ sputl(3X)
connection t_snd: send data or expedited data over a t_snd(3N)
over a/ t_rcv: receive data or expedited data sent t_rcv(3N)
t_snd: send data or expedited data over a connection ..... t_snd(3N)
prof: display profile data ....................... prof(1)
/library routines for external data representation ........ xdr(3N)
call stat: data returned by stat system stat(5)
brk: Change data segment space allocation brk(2)
memctl: Change data segment space allocation. memctl(2)
sbrk: Change data segment space allocation. sbrk(2)
/receive data or expedited data sent over a connection t_rcv(3N)
memory. plock: Lock data, text, or both into ... plock(2)
buffering /Synchronously write data to a file without system dg_unbuffered_write(2)
tkey: set label and data translation parameters tkey(1)
types: primitive system data types ................. types(5)
t_rcvudata: receive a data unit .................. t_rcvudata(3N)
t_sndudata: send a data unit .................. t_sndudata(3N)
/Reset the remote file lock database and start the lock/ dg_lock_reset(2)
changes to the Help Facility database helpadm: make .... helpadm(1M)
join: relational database operator .......... join(1)
and printer capability database terminfo: terminal terminfo(4)
tput: query terminfo database ................... tput(1)
/mktime, strftime, tzset: date and time conversions .. ctime(3C)
ftime: get date and time .............. ftime(3C)
gettimeofday: Get date and time. ............. gettimeofday(2)
settimeofday: Set date and time. ............. settimeofday(2)
date: print and set the date ....................... date(1)
date: print and set the date date(1)
between prime and non-prime days /used to distinguish . holidays(4)
/dbm_nextkey, dbm_error, dbm_clearerr: data base/ ... ndbm(3)
dbm_store,/ dbm_open, dbm_close, dbm_fetch, ...... ndbm(3)
/dbm_fetch, dbm_store, dbm_delete, dbm_firstkey,/ . ndbm(3)
/dbm_firstkey, dbm_nextkey, dbm_error, dbm_clearerr: data/ ndbm(3)
dbm_open, dbm_close, dbm_fetch, dbm_store,/ ..... ndbm(3)
/dbm_store, dbm_delete, dbm_firstkey, dbm_nextkey,/ ndbm(3)
firstkey, nextkey: data base/ dbminit, fetch, store, delete, dbm(3X)
/dbm_delete, dbm_firstkey, dbm_nextkey, dbm_error,/ ... ndbm(3)
dbm_fetch, dbm_store,/ dbm_open, dbm_close, ....... ndbm(3)
/dbm_close, dbm_fetch, dbm_store, dbm_delete,/ .... ndbm(3)
dbx: debugger .............. dbx(1)
dc: desk calculator ........ dc(1)
dd: convert and copy a file dd(1)
deblock: change blocking size deblock(1)
ctrace: C program debugger ................... ctrace(1)
Licensed material--property of copyright holder(s) Page 15
index(0) DG/UX 4.30 index(0)
dbx: debugger ................... dbx(1)
dg_fsdb: DG/UX file system debugger ................... dg_fsdb(1M)
fsdb: file system debugger ................... fsdb(1M)
sdb: symbolic debugger ................... sdb(1)
to contact remote system with debugging on Uutry: try ... uutry(1M)
with/ dg_decryptsessionkey: Decrypt a conversation key . dg_decryptsessionkey(2)
timezone: set default system time zone ... timezone(4)
sysdef: output system definition ................. sysdef(1M)
/special equation character definitions for eqn and neqn eqnchar(5)
and symbols glossary: definitions of common terms glossary(1)
complete. /Wait for previously delayed lock requests to ... dg_lock_wait(2)
rm, rmdir: remove, delete files or directories rm(1)
data/ dbminit, fetch, store, delete, firstkey, nextkey: . dbm(3X)
basename, dirname: deliver portions of path names basename(1)
file tail: deliver the last part of a . tail(1)
delta commentary of an SCCS delta cdc: change the ..... cdc(1)
delta: make a delta (change) to an SCCS file delta(1)
delta cdc: change the delta commentary of an SCCS cdc(1)
rmdel: remove a delta from an SCCS file .... rmdel(1)
to an SCCS file delta: make a delta (change) delta(1)
comb: combine SCCS deltas ..................... comb(1)
mesg: permit or deny messages .............. mesg(1)
tbl, and eqn constructs deroff: remove nroff/troff, deroff(1)
usage: retrieve a command description and usage examples usage(1)
description into a terminfo description /convert a termcap captoinfo(1M)
of DGC AViiON computer system description file /format .. system(4)
device-independent/ font: description files for ...... font(5)
captoinfo: convert a termcap description into a terminfo/ captoinfo(1M)
troff: description of output language troff(5)
compare or print out terminfo descriptions infocmp: ..... infocmp(1M)
object associated with a file descriptor. close: Close an close(2)
fcntl: File descriptor control. ........ fcntl(2)
dup: Duplicate an open file descriptor. ................ dup(2)
descriptor onto a specific descriptor. /an open file . dup2(2)
/endfsent: get filesystem descriptor file entry ...... getfsent(3)
/hasmntopt: get file system descriptor file entry ...... getmntent(3)
dup2: Duplicate an open file descriptor onto a specific/ dup2(2)
dc: desk calculator ............ dc(1)
message queue attributes or destroy a message queue. /set msgctl(2)
segment. shmdt: Detach a shared memory ..... shmdt(2)
file: determine file type ........ file(1)
hexadecimal. ishex: Determine if a character is ishex(3C)
a file. access: Determine the accessibility of access(2)
base sdetab: software development environment data sdetab(4)
sde: software development environment .... sde(5)
/commands to reset software development environment target sde-target(1)
/Once Read Multiple optical device) as magnetic tape ... wmt(7)
lines for finite width output device fold: fold long .... fold(1)
swapon: Add a swap device for interleaved/ .... swapon(2)
additional DG/UX System device for paging /specify swapon(1M)
and master files containing device information /directory master(4)
plm: pseudo lock manager device interface ........... plm(7)
Licensed material--property of copyright holder(s) Page 16
index(0) DG/UX 4.30 index(0)
ioctl: Control device. .................... ioctl(2)
devnm: device name ................ devnm(1M)
clone: open any minor device on a STREAMS driver . clone(7)
start the WORM magnetic tape device server wmtd: ....... wmtd(1M)
ustat: Get file system device statistics. ......... ustat(2)
umount: Remove a file system device. .................... umount(2)
dg_devctl: Perform device-control functions. .. dg_devctl(2)
font: description files for device-independent troff ... font(5)
and passwords for dial-up devices /log-in programs .. d_passwd(4)
password. dialups: devices requiring a dial-up dialups(4)
load terminal controller devices tcload: ........... tcload(1M)
devnm: device name ......... devnm(1M)
pseudo-device devtty: control terminal ... devtty(7)
blocks and inodes df: report number of free disk df(1M)
description/ system: format of DGC AViiON computer system . system(4)
special files lp: DGC AViiON family line printer lp(7)
a conversation key with the/ dg_decryptsessionkey: Decrypt dg_decryptsessionkey(2)
device-control functions. dg_devctl: Perform ......... dg_devctl(2)
a conversation key with the/ dg_encryptsessionkey: Encrypt dg_encryptsessionkey(2)
returns the extended errno/ dg_ext_errno: This function dg_ext_errno(2)
usage information for a/ dg_file_info: return file .. dg_file_info(2)
advisory lock on an open file/ dg_flock: apply or remove an dg_flock(3C)
debugger dg_fsdb: DG/UX file system . dg_fsdb(1M)
status information. dg_fstat: Get extended file dg_fstat(2)
secret key dg_getrootkey: Get root's .. dg_getrootkey(2)
pdp11, u3b, u3b5, vax:/ dghost, m68k, m88k, i386, .. machid(1)
about current IPCs state. dg_ipc_info: Get information dg_ipc_info(2)
lock request on a filehandle. dg_lcntl: Process a record . dg_lcntl(2)
held by remote lock clients. dg_lock_kill: Remove locks . dg_lock_kill(2)
remote file lock database and/ dg_lock_reset: Reset the ... dg_lock_reset(2)
previously delayed lock/ dg_lock_wait: Wait for ..... dg_lock_wait(2)
node. dg_mknod: Create a file system dg_mknod(2)
dg_mount: Mount a file system. dg_mount(2)
dg_mstat: Get file status. . dg_mstat(2)
information about the/ dg_process_info: Returns ... dg_process_info(2)
resource limits of a control/ dg_set_cpd_limits: Change the dg_set_cpd_limits(2)
client's secret key in the/ dg_setsecretkey: Store a ... dg_setsecretkey(2)
status information. dg_stat: Get extended file . dg_stat(2)
supplies the caller with/ dg_sys_info: This routine .. dg_sys_info(2)
Synchronously read data/ dg_unbuffered_read: ........ dg_unbuffered_read(2)
Synchronously write data to a/ dg_unbuffered_write: ....... dg_unbuffered_write(2)
common archive file format in DG/UX ar: ................. ar(4)
regular expression handler in DG/UX /re_comp, re_exec: .. berk_regex(3)
at, batch: execute DG/UX commands at a later time at(1)
crontab: user crontab file in DG/UX ...................... crontab(1)
lock on an open file in DG/UX /or remove an advisory dg_flock(3C)
check and interactive/ fsck: DG/UX file system consistency fsck(1M)
dg_fsdb: DG/UX file system debugger . dg_fsdb(1M)
hier: DG/UX file system hierarchy hier(5)
dumpfs: dump DG/UX file system information dumpfs(1M)
incrementally restore a DG/UX file system restore: restore(1M)
tunefs: tune an existing DG/UX file system .......... tunefs(1M)
Licensed material--property of copyright holder(s) Page 17
index(0) DG/UX 4.30 index(0)
of job control facilities in DG/UX jobs: summary ....... jobs(3)
file access routines in DG/UX ldfcn: executable ... ldfcn(4)
of an executable file in DG/UX /read the system header ldsyshread(3X)
mounted file system table in DG/UX mnttab: ............. mnttab(4)
pseudo-device syscon: DG/UX operating system console syscon(7)
profiler prf: DG/UX operating system ..... prf(7)
/prfdc, prfsnap, prfpr: DG/UX operating system/ .... profiler(1M)
filter for CRT terminals in DG/UX pg: file perusal .... pg(1)
write password file entry in DG/UX putpwent: ........... putpwent(3)
shl: shell layer manager in DG/UX ...................... shl(1)
crash: what to do when the DG/UX System crashes ....... crash(8)
swapon: specify additional DG/UX System device for paging swapon(1M)
backup /tapesave: daily/weekly DG/UX system file system ... filesave(1M)
vipw: edit the DG/UX System password file . vipw(1M)
halt: stop the DG/UX System processor ..... halt(1M)
intro: introduction to DG/UX System special files . intro(7)
uname: print name of current DG/UX system ............... uname(1)
within a host in DG/UX /piping communications unix_ipc(6F)
aligned memory allocator in DG/UX valloc: ............. valloc(3)
to implement shared strings in DG/UX /strings from C programs xstr(1)
trace dg_xtrace: extended process dg_xtrace(2)
IMAGEN laser printer di10: Postprocessor for the di10(1)
terminal line connection dial: establish an out-going dial(3C)
ratfor: rational FORTRAN dialect .................... ratfor(1)
programs and passwords for dial-up devices /log-in ... d_passwd(4)
dialups: devices requiring a dial-up password. .......... dialups(4)
dial-up password. dialups: devices requiring a dialups(4)
bdiff: big diff ....................... bdiff(1)
comparator diff: differential file .... diff(1)
comparison diff3: 3-way differential file diff3(1)
sdiff: side-by-side difference program ......... sdiff(1)
diffmk: mark differences between files .. diffmk(1)
directory/ berk_diff: Berkeley differential file and ...... berk_diff(1)
diff: differential file comparator diff(1)
berk_diff3: Berkeley 3-way differential file comparison berk_diff3(1)
diff3: 3-way differential file comparison diff3(1)
between files diffmk: mark differences ... diffmk(1)
/asctime, cftime, ascftime, difftime, mktime, strftime,/ ctime(3C)
dircmp: directory comparison dircmp(1)
file uucheck: check the uucp directories and permissions uucheck(1M)
rmdir: remove, delete files or directories rm, ........... rm(1)
telldir, seekdir, rewinddir,/ directory: opendir, readdir, directory(3X)
master: master file directory and master files/ master(4)
mounting via/ exportfs: Make a directory available for .... exportfs(2)
cd: change working directory .................. cd(1)
uucleanup: uucp spool directory clean-up ......... uucleanup(1M)
/Berkeley differential file and directory comparator ....... berk_diff(1)
dircmp: directory comparison ....... dircmp(1)
limits for a control point directory /view the allocation cpd(1)
limits of a control point directory. /the resource .. dg_set_cpd_limits(2)
getdents: get directory entries in a/ .... getdents(2)
file system independent directory entry dirent: ... dirent(4)
Licensed material--property of copyright holder(s) Page 18
index(0) DG/UX 4.30 index(0)
unlink: Remove a directory entry. ........... unlink(2)
mkdir: Create a directory file. ............ mkdir(2)
rmdir: Remove a directory file. ............ rmdir(2)
chroot: change root directory for a command .... chroot(1M)
pathname of current working directory getcwd: get ..... getcwd(3C)
ls: list contents of directory .................. ls(1)
mkdir: make a directory .................. mkdir(1)
mvdir: move a directory .................. mvdir(1M)
pwd: print working directory name ............. pwd(1)
chdir: Change the working directory of the calling/ .. chdir(2)
chroot: Changes the root directory of the calling/ .. chroot(2)
seekdir, rewinddir, closedir: directory operations /telldir, directory(3X)
ordinary file. mknod: Make a directory, or a special or . mknod(2)
getwd: get current working directory pathname ......... getwd(3)
scandir, alphasort: scan a directory .................. scandir(3)
independent directory entry dirent: file system ........ dirent(4)
path names basename, dirname: deliver portions of basename(1)
dis: object code disassembler dis(1)
t_unbind: disable a transport endpoint t_unbind(3N)
printers enable, disable: enable/disable LP . enable(1)
acct: Enable or disable process accounting. acct(2)
dis: object code disassembler ............... dis(1)
type, modes, speed, and line discipline /set terminal .. getty(1M)
type, modes, speed, and line discipline /set terminal .. uugetty(1M)
t_snddis: send user-initiated disconnect request ......... t_snddis(3N)
retrieve information from disconnect t_rcvdis: ...... t_rcvdis(3N)
id diskusg: generate disk accounting data by user diskusg(1M)
system/ sync: Synchronize disk and memory resident file sync(2)
df: report number of free disk blocks and inodes ..... df(1M)
in-core state with that on disk. /Synchronize a file's fsync(2)
dsk: block special disk interface ............. dsk(7)
rdsk: character special disk interface ............. rdsk(7)
cied: AViiON family disk subsystem ............. cied(7)
cimd: AViiON family disk subsystem ............. cimd(7)
cird: AViiON family disk subsystem ............. cird(7)
sd: AViiON family disk subsystem ............. sd(7)
du: summarize disk usage ................. du(1)
managing physical and logical/ diskman: menu interface for diskman(1M)
managing physical and logical disks /menu interface for . diskman(1M)
accounting data by user id diskusg: generate disk ..... diskusg(1M)
mount, umount: mount and dismount filesystems ....... mount(1M)
/view: screen-oriented (visual) display editor based on ex . vi(1)
fez: display file element sizes . fez(1)
translation/ tdisplay: display label and record ... tdisplay(1)
prof: display profile data ....... prof(1)
identifier systemid: display the unique system .. systemid(1M)
hypot: Euclidean distance function .......... hypot(3M)
/accounting information used to distinguish between prime and/ holidays(4)
and remainder div, ldiv: compute quotient div(3C)
routines /res_send, res_init, dn_comp, dn_expand: resolver resolver(3)
/res_send, res_init, dn_comp, dn_expand: resolver routines resolver(3)
a list of subjects from a document subj: generate ... subj(1)
Licensed material--property of copyright holder(s) Page 19
index(0) DG/UX 4.30 index(0)
macros, eqn/ checkmm: checks documents formatted with mm checkmm(1)
MM macros mm: print documents formatted with the mm(1)
macro package for formatting documents mm: the MM ...... mm(5)
mmt: typeset documents .................. mmt(1)
nulladm,/ chargefee, ckpacct, dodisk, lastlogin, monacct, acctsh(1M)
whodo: who is doing what ................. whodo(1M)
Get name of current domain. getdomainname: .... getdomainname(2)
Set name of current domain. setdomainname: .... setdomainname(2)
/atof: convert string to double-precision number .... strtod(3C)
putmsg: Pass a message down a stream. ............. putmsg(2)
connection. shutdown: Shut down part of a full-duplex . shutdown(2)
state shutdown: shut down system, change system . shutdown(1M)
passwords for dial-up devices d_passwd: log-in programs and d_passwd(4)
nrand48, mrand48, jrand48,/ drand48, erand48, lrand48, . drand48(3)
grap: pic preprocessor for drawing graphs ............. grap(1)
pic: troff preprocessor for drawing simple pictures .... pic(1)
remainder drem: IEEE floating-point .. drem(3M)
any minor device on a STREAMS driver clone: open ........ clone(7)
nterm: terminal driving tables for nroff ... nterm(5)
interface dsk: block special disk .... dsk(7)
du: summarize disk usage ... du(1)
information dumpfs: dump DG/UX file system ..... dumpfs(1M)
dump: incremental file system dump ....................... dump(1M)
dump dump: incremental file system dump(1M)
od: octal dump ....................... od(1)
object archive file att_dump: dump parts of an object or . att_dump(1)
read and write labels for dump tapes dump2label: .... dump2label(1M)
backup dump2: incremental file system dump2(1M)
labels for dump tapes dump2label: read and write . dump2label(1M)
zdump: time zone dumper ..................... zdump(1M)
information dumpfs: dump DG/UX file system dumpfs(1M)
dumptab: tape table file for dumptab(4)
descriptor. dup: Duplicate an open file dup(2)
descriptor onto a specific/ dup2: Duplicate an open file dup2(2)
descriptor. dup: Duplicate an open file ..... dup(2)
descriptor onto a/ dup2: Duplicate an open file ..... dup2(2)
cut out selected fields of each line of a file cut: .. cut(1)
reverse order of characters in each line of file rev: .... rev(1)
swab: Swap the bytes within each pair of bytes in a/ ... swab(3C)
echo: echo arguments ............. echo(1)
echo: echo arguments ....... echo(1)
floating-point number to/ ecvt, fcvt, gcvt: convert .. ecvt(3)
ed, red: text editor ....... ed(1)
program end, etext, edata: last locations in ... end(3C)
ex for casual users) edit: text editor (variant of edit(1)
file vipw: edit the DG/UX System password vipw(1M)
sact: print current SCCS file editing activity ........... sact(1)
/(visual) display editor based on ex ......... vi(1)
ed, red: text editor ..................... ed(1)
editread: command line editor ..................... editread(5)
ex: text editor ..................... ex(1)
ld: link editor for common object files ld(1)
Licensed material--property of copyright holder(s) Page 20
index(0) DG/UX 4.30 index(0)
common assembler and link editor output a.out: ...... a.out(4)
sed: stream editor ..................... sed(1)
casual users) edit: text editor (variant of ex for .. edit(1)
editread: command line editor editread(5)
setgid: set the real-, effective-, and/ ........... setgid(2)
setregid: Set the real-, effective-, and/ ........... setregid(2)
setreuid: Set the real-, effective-, and/ ........... setreuid(2)
setuid: Set the real-, effective-, and/ ........... setuid(2)
getegid: Get the effective-group-id. ........ getegid(2)
geteuid: Get the effective-user-id. ......... geteuid(2)
process in a virtual memory efficient way. /Spawn new . vfork(2)
for a pattern grep, egrep, fgrep: search a file grep(1)
remque: Remove an element from a circular queue. remque(3C)
fez: display file element sizes .............. fez(1)
insque: Add an element to a circular queue. insque(3C)
enable/disable LP printers enable, disable: ........... enable(1)
accounting. acct: Enable or disable process .. acct(2)
enable, disable: enable/disable LP printers . enable(1)
for/ uuencode, uudecode: encode/decode a binary file uuencode(1)
crypt: encode/decode .............. crypt(1)
with/ dg_encryptsessionkey: Encrypt a conversation key . dg_encryptsessionkey(2)
encryption crypt, setkey, encrypt: generate hashing .. crypt(3)
encrypt: generate hashing encryption crypt, setkey, . crypt(3)
crypt: password and file encryption functions ....... crypt(3X)
makekey: generate encryption key ............. makekey(1)
locations in program end, etext, edata: last .... end(3C)
/addexportent, remexportent, endexportent, getexportopt:/ exportent(3)
/getfstype, setfsent, endfsent: get filesystem/ .. getfsent(3)
/getgrgid, getgrnam, setgrent, endgrent, fgetgrent: get group/ getgrent(3)
/gethostbyname, sethostent, endhostent: get network host/ gethostent(3N)
system/ /setmntent, addmntent, endmntent, hasmntopt: get file getmntent(3)
/getnetbyname, setnetent, endnetent: get network entry getnetent(3N)
getnetgrent, setnetgrent, endnetgrent, innetgr: get/ . getnetgrent(3N)
socket: Create an endpoint for communication. socket(2)
bind an address to a transport endpoint t_bind: .......... t_bind(3N)
t_close: close a transport endpoint ................... t_close(3N)
current event on a transport endpoint t_look: look at the t_look(3N)
t_open: establish a transport endpoint ................... t_open(3N)
manage options for a transport endpoint t_optmgmt: ....... t_optmgmt(3N)
t_unbind: disable a transport endpoint ................... t_unbind(3N)
/getprotobyname, setprotoent, endprotoent: get protocol/ . getprotoent(3N)
/getpwuid, getpwnam, setpwent, endpwent, setpwfile,/ ...... getpwent(3)
/getservbyname, setservent, endservent: get service entry getservent(3N)
utmp/ /pututline, setutent, endutent, utmpname: access . getut(3)
main: Enter a C main program. .... main(3C)
nlist: get entries from name list ..... nlist(3)
manuals man: print entries from the reference . man(1)
getdents: get directory entries in a/ .............. getdents(2)
logger: make entries in the system log .. logger(1)
man: macros for formatting entries in this manual ..... man(5)
file/ /manipulate line number entries of a common object . ldlread(3X)
/ldnlseek: seek to line number entries of a section of a/ . ldlseek(3X)
Licensed material--property of copyright holder(s) Page 21
index(0) DG/UX 4.30 index(0)
/ldnrseek: seek to relocation entries of a section of a/ . ldrseek(3X)
version of a terminfo entry /create a temporary . chgtinfo(1)
/the file handle of the export entry containing filename. getfh(2)
system independent directory entry dirent: file ........ dirent(4)
utmp, wtmp: utmp and wtmp entry formats .............. utmp(4)
get filesystem descriptor file entry /setfsent, endfsent: getfsent(3)
fgetgrent: get group file entry /setgrent, endgrent, getgrent(3)
endhostent: get network host entry /sethostent, ........ gethostent(3N)
file system descriptor file entry /hasmntopt: get ..... getmntent(3)
endnetent: get network entry /setnetent, ......... getnetent(3N)
innetgr: get network group entry /endnetgrent, ....... getnetgrent(3N)
endprotoent: get protocol entry /setprotoent, ....... getprotoent(3N)
fgetpwent: get password file entry /endpwent, setpwfile, getpwent(3)
getrpcbynumber: get RPC entry /getrpcbyname, ...... getrpcent(3N)
endservent: get service entry /setservent, ........ getservent(3N)
utmpname: access utmp file entry /setutent, endutent, getut(3)
putpwent: write password file entry in DG/UX ............. putpwent(3)
for object file symbol table entry /retrieve symbol name ldgetname(3X)
/compute index of symbol table entry of an object file .... ldtbindex(3X)
/read an indexed symbol table entry of an object file .... ldtbread(3X)
remove: remove a filename entry ...................... remove(3S)
unlink: Remove a directory entry. ..................... unlink(2)
command execution env: set environment for ... env(1)
environ: user environment .. environ(5)
profile: setting up an environment at login time .. profile(4)
/IEEE floating-point environment control ........ fpgetround(3C)
sdetab: software development environment data base ...... sdetab(4)
environ: user environment ................ environ(5)
execution env: set environment for command .... env(1)
getenv: return value for environment name ........... getenv(3C)
printenv: print out the environment ................ printenv(1)
putenv: change or add value to environment ................ putenv(3)
sde: software development environment ................ sde(5)
to reset software development environment target /commands sde-target(1)
character definitions for eqn and neqn /special equation eqnchar(5)
remove nroff/troff, tbl, and eqn constructs deroff: .... deroff(1)
equations in text for troff eqn: format mathematical ... eqn(1)
formatted with mm macros, eqn or tbl /checks documents checkmm(1)
character definitions for eqn/ eqnchar: special equation .. eqnchar(5)
for eqn and/ eqnchar: special equation character definitions eqnchar(5)
eqn: format mathematical equations in text for troff eqn(1)
mrand48, jrand48,/ drand48, erand48, lrand48, nrand48, . drand48(3)
complementary error function erf, erfc: error function and erf(3M)
complementary error/ erf, erfc: error function and ... erf(3M)
err: error-logging interface err(7)
/function returns the extended errno for the current process. dg_ext_errno(2)
system error messages perror, errno, sys_errlist, sys_nerr: perror(3C)
a string corresponding to an error code. strerror: Return strerror(3C)
an error message to standard error. extended_perror: Print extended_perror(3C)
complementary/ erf, erfc: error function and ......... erf(3M)
function and complementary error function /erfc: error erf(3M)
receive a unit data error indication t_rcvuderr: t_rcvuderr(3N)
Licensed material--property of copyright holder(s) Page 22
index(0) DG/UX 4.30 index(0)
strclean: STREAMS error logger cleanup program strclean(1M)
strerr: STREAMS error logger daemon ........ strerr(1M)
log: interface to STREAMS error logging and event/ ... log(7)
massaging C/ mkstr: create an error message file by ...... mkstr(1)
t_error: produce error message .............. t_error(3N)
extended_perror: Print an error message to standard/ . extended_perror(3C)
sys_errlist, sys_nerr: system error messages perror, errno, perror(3C)
to system calls and error numbers /introduction intro(2)
matherr: error-handling function .... matherr(3M)
err: error-logging interface .... err(7)
hashcheck: find spelling errors /hashmake, spellin, spell(1)
another transport/ t_connect: establish a connection with t_connect(3N)
t_open: establish a transport endpoint t_open(3N)
terminal line/ dial: establish an out-going ..... dial(3C)
setmnt: establish mount table ...... setmnt(1M)
in program end, etext, edata: last locations end(3C)
ethers, ether_ntoa, ether_aton, ether_ntohost,/ ethers(3N)
/ether_aton, ether_ntohost, ether_hostton, ether_line:/ ethers(3N)
/ether_ntohost, ether_hostton, ether_line: Ethernet address/ ethers(3N)
/ether_hostton, ether_line: Ethernet address mapping/ .. ethers(3N)
hken: Hawk Ethernet interface ......... hken(7)
inen: integrated Ethernet interface ......... inen(7)
ether_ntohost,/ ethers, ether_ntoa, ether_aton, .... ethers(3N)
/ether_ntoa, ether_aton, ether_ntohost, ether_hostton,/ ethers(3N)
ether_aton, ether_ntohost,/ ethers, ether_ntoa, ........ ethers(3N)
hypot: Euclidean distance function hypot(3M)
expression expr: evaluate arguments as an ... expr(1)
test: condition evaluation command ......... test(1)
t_look: look at the current event on a transport endpoint t_look(3N)
to STREAMS error logging and event tracing log: interface log(7)
edit: text editor (variant of ex for casual users) ....... edit(1)
ex: text editor ............ ex(1)
display editor based on ex /screen-oriented (visual) vi(1)
lpq: spool queue examination program ........ lpq(1)
signals. sigprocmask: Examine and change blocked . sigprocmask(2)
action. sigaction: Examine and change signal .. sigaction(2)
sigpending: Examine pending signals. ... sigpending(2)
crash: examine system images ...... crash(1M)
command description and usage examples usage: retrieve a usage(1)
execve, execlp, execvp:/ exec: execl, execv, execle, exec(2)
execlp, execvp: execute/ exec: execl, execv, execle, execve, exec(2)
execvp:/ exec: execl, execv, execle, execve, execlp, .... exec(2)
/execl, execv, execle, execve, execlp, execvp: execute a file exec(2)
routines in DG/UX ldfcn: executable file access ..... ldfcn(4)
/read the system header of an executable file in DG/UX ... ldsyshread(3X)
/information from an executable file ............ strip(1)
execve, execlp, execvp: execute a file /execv, execle, exec(2)
execve: Execute a program file. .... execve(2)
construct argument list(s) and execute command xargs: .... xargs(1)
later time at, batch: execute DG/UX commands at a at(1)
regcmp, regex: compile and execute regular expression . regcmp(3X)
requests uuxqt: execute remote command ..... uuxqt(1M)
Licensed material--property of copyright holder(s) Page 23
index(0) DG/UX 4.30 index(0)
set environment for command execution env: ............ env(1)
sleep: suspend execution for an interval .. sleep(1)
sleep: suspend execution for interval ..... sleep(3C)
monitor: prepare execution profile .......... monitor(3C)
this process. profil: Set up execution time profiling for profil(2)
UNIX-to-UNIX system command execution uux: ............ uux(1)
execvp: execute/ exec: execl, execv, execle, execve, execlp, exec(2)
exec: execl, execv, execle, execve, execlp, execvp:/ ... exec(2)
file. execve: Execute a program .. execve(2)
execv, execle, execve, execlp, execvp: execute a file /execl, exec(2)
system calls link, unlink: exercise link and unlink ... link(1M)
whether certain conditions exist on open streams. /Check poll(2)
tunefs: tune an existing DG/UX file system . tunefs(1M)
a new file or rewrite an existing one. creat: Create creat(2)
terminate the process/ exit: Flush buffers and .... exit(3C)
_exit: Terminate a process. _exit(2)
exponential, logarithm,/ exp, log, log10, pow, sqrt: exp(3M)
pcat, unpack: compress and expand files pack, ........ pack(1)
t_snd: send data or expedited data over a/ ..... t_snd(3N)
t_rcv: receive data or expedited data sent over a/ t_rcv(3N)
exp, log, log10, pow, sqrt: exponential, logarithm, power,/ exp(3M)
/Return the file handle of the export entry containing/ ... getfh(2)
information /getexportopt: get exported file system ....... exportent(3)
setexportent, addexportent,/ exportent, getexportent, ... exportent(3)
available for mounting via/ exportfs: Make a directory . exportfs(2)
expression expr: evaluate arguments as an expr(1)
routines regexp: regular expression compile and match regexp(5)
regcmp: regular expression compiler ........ regcmp(1)
expr: evaluate arguments as an expression ................. expr(1)
/re_comp, re_exec: regular expression handler in DG/UX berk_regex(3)
compile and execute regular expression regcmp, regex: . regcmp(3X)
/This function returns the extended errno for the current/ dg_ext_errno(2)
information. dg_fstat: Get extended file status ....... dg_fstat(2)
information. dg_stat: Get extended file status ....... dg_stat(2)
dg_xtrace: extended process trace ..... dg_xtrace(2)
error message to standard/ extended_perror: Print an .. extended_perror(3C)
/library routines for external data representation xdr(3N)
programs to implement/ xstr: extract strings from C ..... xstr(1)
fsplit: split f77 or ratfor files ........ fsplit(1)
remainder,/ floor, ceil, fmod, fabs: floor, ceiling, ...... floor(3M)
simplified software signal facilities /signal: ....... berk_signal(3)
jobs: summary of job control facilities in DG/UX ........ jobs(3)
inter-process communication facilities status /report . ipcs(1)
make changes to the Help Facility database helpadm: helpadm(1M)
help: Help Facility ................... help(1)
factor: factor a number ............ factor(1)
factor: factor a number .... factor(1)
true, false: provide truth values true(1)
cied: AViiON family disk subsystem ...... cied(7)
cimd: AViiON family disk subsystem ...... cimd(7)
cird: AViiON family disk subsystem ...... cird(7)
sd: AViiON family disk subsystem ...... sd(7)
Licensed material--property of copyright holder(s) Page 24
index(0) DG/UX 4.30 index(0)
asynchronous/ syac: AViiON family intelligent ......... syac(7)
files lp: DGC AViiON family line printer special lp(7)
cisc: AViiON family SCSI adapter subsystem cisc(7)
insc: AViiON family SCSI adapter subsystem insc(7)
st: AViiON family tape subsystem ...... st(7)
data in a machine-independent fashion /access long integer sputl(3X)
/calloc, mallopt, mallinfo: fast main memory allocator . malloc(3X)
abort: generate an IOT fault ...................... abort(3C)
fchmod: Change mode of file. fchmod(2)
group id of a file. fchown: Change user id and . fchown(2)
a stream fclose, fflush: close or flush fclose(3S)
fcntl: file control options fcntl(5)
control. fcntl: File descriptor ..... fcntl(2)
floating-point number/ ecvt, fcvt, gcvt: convert ........ ecvt(3)
fopen, freopen, fdopen: open a stream ...... fopen(3S)
status inquiries ferror, feof, clearerr, fileno: stream ferror(3S)
fileno: stream status/ ferror, feof, clearerr, .... ferror(3S)
firstkey, nextkey:/ dbminit, fetch, store, delete, ...... dbm(3X)
head: give first few lines .................. head(1)
sizes fez: display file element .. fez(1)
stream fclose, fflush: close or flush a ... fclose(3S)
the first set bit in an/ ffs: Return the position of ffs(3C)
word from a/ getc, getchar, fgetc, getw: get character or getc(3S)
/getgrnam, setgrent, endgrent, fgetgrent: get group file/ . getgrent(3)
reposition a/ fseek, rewind, fgetpos, fsetpos, ftell: ... fseek(3S)
/setpwent, endpwent, setpwfile, fgetpwent: get password file/ getpwent(3)
stream gets, fgets: get a string from a . gets(3S)
pattern grep, egrep, fgrep: search a file for a . grep(1)
cut: cut out selected fields of each line of a file cut(1)
mkfifo: Make a FIFO special file. ......... mkfifo(3)
times. utime: Set file access and modification utime(2)
times utimes: set file access and modification utimes(2)
ldfcn: executable file access routines in DG/UX ldfcn(4)
the accessibility of a file. access: Determine ... access(2)
/Berkeley differential file and directory comparator berk_diff(1)
cpio: copy file archives in and out ... cpio(1)
of an object or object archive file att_dump: dump parts . att_dump(1)
rcs: change RCS file attributes ............ rcs(1)
mkstr: create an error message file by massaging C source . mkstr(1)
pwck, grpck: password/group file checkers .............. pwck(1M)
chmod: change the mode of a file ....................... chmod(1)
chmod: Change mode of file. ...................... chmod(2)
user id and group id of a file. chown: Change ....... chown(2)
diff: differential file comparator ............ diff(1)
Berkeley 3-way differential file comparison berk_diff3: berk_diff3(1)
diff3: 3-way differential file comparison ............ diff3(1)
fcntl: file control options ....... fcntl(5)
public UNIX-to-UNIX system file copy uuto, uupick: ... uuto(1)
core: format of core image file ....................... core(4)
cprs: compress a common object file ....................... cprs(1)
umask: Set and get file creation mask. ........ umask(2)
ctags: create a tags file ....................... ctags(1)
Licensed material--property of copyright holder(s) Page 25
index(0) DG/UX 4.30 index(0)
fields of each line of a file cut: cut out selected cut(1)
dd: convert and copy a file ....................... dd(1)
a delta (change) to an SCCS file delta: make .......... delta(1)
an object associated with a file descriptor. close: Close close(2)
fcntl: File descriptor control. ... fcntl(2)
dup: Duplicate an open file descriptor. ........... dup(2)
dup2: Duplicate an open file descriptor onto a/ .... dup2(2)
file: determine file type .. file(1)
files/ master: master file directory and master .. master(4)
sact: print current SCCS file editing activity ...... sact(1)
fez: display file element sizes ......... fez(1)
crypt: password and file encryption functions .. crypt(3X)
get filesystem descriptor file entry /endfsent: ..... getfsent(3)
endgrent, fgetgrent: get group file entry /setgrent, ..... getgrent(3)
get file system descriptor file entry /hasmntopt: .... getmntent(3)
fgetpwent: get password file entry /setpwfile, .... getpwent(3)
utmpname: access utmp file entry /endutent, ..... getut(3)
putpwent: write password file entry in DG/UX ........ putpwent(3)
execlp, execvp: execute a file /execv, execle, execve, exec(2)
execve: Execute a program file. ...................... execve(2)
fchmod: Change mode of file. ...................... fchmod(2)
user id and group id of a file. fchown: Change ...... fchown(2)
grep, egrep, fgrep: search a file for a pattern ......... grep(1)
which: locate a program file for csh(1) users ...... which(1)
dumptab: tape table file for ................... dumptab(4)
ldaopen: open an object file for reading ldopen, .. ldopen(3X)
syslog.conf: configuration file for syslogd system log/ syslog.conf(5)
/encode/decode a binary file for transmission via mail uuencode(1)
acct: per-process accounting file format ................ acct(4)
ar: common archive file format in DG/UX ....... ar(4)
intro: introduction to file formats ............... intro(4)
sccstorcs: build RCS file from SCCS file ........ sccstorcs(1)
ftruncate: Truncate a file. ...................... ftruncate(2)
entries of a common object file function /line number ldlread(3X)
get: get a version of an SCCS file ....................... get(1)
group: group file ....................... group(4)
entry/ getfh: Return the file handle of the export .. getfh(2)
files filehdr: file header for common object filehdr(4)
limits: file header for/ ........... limits(4)
ldfhread: read the file header of an object file ldfhread(3X)
ldohseek: seek to the optional file header of an object file ldohseek(3X)
crontab: user crontab file in DG/UX .............. crontab(1)
an advisory lock on an open file in DG/UX /apply or remove dg_flock(3C)
system header of an executable file in DG/UX /read the ... ldsyshread(3X)
split: split a file into pieces ........... split(1)
issue: issue identification file ....................... issue(4)
of a member of an archive file /Read the archive header ldahread(3X)
ldaclose: close an object file ldclose, ............. ldclose(3X)
the file header of an object file ldfhread: read ....... ldfhread(3X)
a section of a common object file /line number entries of ldlseek(3X)
file header of an object file /seek to the optional ldohseek(3X)
a section of a common object file /to relocation entries of ldrseek(3X)
Licensed material--property of copyright holder(s) Page 26
index(0) DG/UX 4.30 index(0)
header of a common object file /indexed/named section ldshread(3X)
section of a common object file /to an indexed/named . ldsseek(3X)
table entry of an object file /compute index of symbol ldtbindex(3X)
table entry of an object file /read an indexed symbol ldtbread(3X)
the symbol table of an object file ldtbseek: seek to .... ldtbseek(3X)
link: Create a new link to a file. ...................... link(2)
the lock/ /Reset the remote file lock database and start dg_lock_reset(2)
hfm: high sierra file manager ............... hfm(4)
merge: three-way file merge ................. merge(1)
mkdir: Create a directory file. ...................... mkdir(2)
mkfifo: Make a FIFO special file. ...................... mkfifo(3)
mknod: build special file ....................... mknod(1M)
or a special or ordinary file. /Make a directory, .. mknod(2)
mkstemp: make a unique file name .................. mkstemp(3C)
mktemp: make a unique file name .................. mktemp(3C)
realpath: returns the real file name. ................. realpath(3)
change the format of a text file newform: ............. newform(1)
name list of common object file nm: print ............ nm(1)
inode: file node structure ........ inode(4)
null: the null file ....................... null(7)
/find the slot in the utmp file of the current user ... ttyslot(3C)
identify processes using a file or file structure fuser: fuser(1M)
one. creat: Create a new file or rewrite an existing creat(2)
passwd: password file ....................... passwd(4)
terminals in DG/UX pg: file perusal filter for CRT pg(1)
viewing more, page: file perusal filter for CRT more(1)
/fsetpos, ftell: reposition a file pointer in a stream ... fseek(3S)
prs: print an SCCS file ....................... prs(1)
rcsfile: format of RCS file ....................... rcsfile(4)
readv: Read from file. ...................... readv(2)
for a common object file /relocation information reloc(4)
rename: Change the name of a file. ...................... rename(2)
of characters in each line of file rev: reverse order ... rev(1)
remove a delta from an SCCS file rmdel: ............... rmdel(1)
rmdir: Remove a directory file. ...................... rmdir(2)
bfs: big file scanner ............... bfs(1)
two versions of an SCCS file sccsdiff: compare .... sccsdiff(1)
sccsfile: format of SCCS file ....................... sccsfile(4)
build RCS file from SCCS file sccstorcs: ........... sccstorcs(1)
format of curses screen image file. scr_dump: ........... scr_dump(4)
dg_mstat: Get file status. ............... dg_mstat(2)
fstat: Get file status. ............... fstat(2)
dg_fstat: Get extended file status information. ... dg_fstat(2)
dg_stat: Get extended file status information. ... dg_stat(2)
lstat: Get file status. ............... lstat(2)
stat: Get file status. ............... stat(2)
in an object or other binary file /the printable strings strings(1)
information from an executable file /strip non-executable strip(1)
processes using a file or file structure /identify .. fuser(1M)
checksum and block count of a file sum: print ........... sum(1)
/symbol name for object file symbol table entry .... ldgetname(3X)
syms: common object file symbol table format ... syms(4)
Licensed material--property of copyright holder(s) Page 27
index(0) DG/UX 4.30 index(0)
Create a symbolic link file. symlink: ............ symlink(2)
dump2: incremental file system backup ......... dump2(1M)
daily/weekly DG/UX system file system backup /tapesave: filesave(1M)
and interactive/ fsck: DG/UX file system consistency check fsck(1M)
dg_fsdb: DG/UX file system debugger ....... dg_fsdb(1M)
fsdb: file system debugger ....... fsdb(1M)
/endmntent, hasmntopt: get file system descriptor file/ getmntent(3)
ustat: Get file system device statistics. ustat(2)
umount: Remove a file system device. ........ umount(2)
dg_mount: Mount a file system. ............... dg_mount(2)
dump: incremental file system dump ........... dump(1M)
fs: file system format ......... fs(4)
information about a mounted file system. fstatfs: Get . fstatfs(2)
hier: DG/UX file system hierarchy ...... hier(5)
directory entry dirent: file system independent .... dirent(4)
dumpfs: dump DG/UX file system information .... dumpfs(1M)
/getexportopt: get exported file system information .... exportent(3)
/disk and memory resident file system information. ... sync(2)
mfs: memory file system ................ mfs(4)
mkfs, newfs: create a file system ................ mkfs(1M)
mount: Mount a file system. ............... mount(2)
dg_mknod: Create a file system node. .......... dg_mknod(2)
filesystem: file system organization ... filesystem(7)
incrementally restore a DG/UX file system restore: ...... restore(1M)
information about a mounted file system. statfs: Get .. statfs(2)
mnttab: mounted file system table in DG/UX . mnttab(4)
tunefs: tune an existing DG/UX file system ................ tunefs(1M)
computer system description file /format of DGC AViiON system(4)
static information about file systems fstab: ....... fstab(4)
and ncheck checklist: list of file systems processed by fsck checklist(4)
the super-blocks of mounted file systems /update ...... update(1M)
volcopy, labelit: copy file systems with label/ ... volcopy(1M)
deliver the last part of a file tail: ................ tail(1)
tmpfile: create a temporary file ....................... tmpfile(3S)
create a name for a temporary file tmpnam, tempnam: ..... tmpnam(3S)
truncate: Truncate a file to a specified length. truncate(2)
twrite: writes a file to tape ............... twrite(1)
and modification times of a file touch: update access . touch(1)
position tape to specified file tposn: ............... tposn(1)
uucp system uucico: file transport program for the uucico(1M)
/the scheduler for the uucp file transport program ..... uusched(1M)
ftw: walk a file tree .................. ftw(3)
file: determine file type .................. file(1)
undo a previous get of an SCCS file unget: ............... unget(1)
report repeated lines in a file uniq: ................ uniq(1)
process/ dg_file_info: return file usage information for a dg_file_info(2)
directories and permissions file uucheck: check the uucp uucheck(1M)
val: validate SCCS file ....................... val(1)
edit the DG/UX System password file vipw: ................ vipw(1M)
/read data blocks from a file without system buffering dg_unbuffered_read(2)
/Synchronously write data to a file without system buffering dg_unbuffered_write(2)
writev: Write on a file. ...................... writev(2)
Licensed material--property of copyright holder(s) Page 28
index(0) DG/UX 4.30 index(0)
umask: set file-creation mode mask .... umask(1)
a record lock request on a filehandle. dg_lcntl: Process dg_lcntl(2)
common object files filehdr: file header for ... filehdr(4)
remove: remove a filename entry ............. remove(3S)
ctermid: generate filename for terminal ...... ctermid(3S)
of the export entry containing filename. /the file handle getfh(2)
ferror, feof, clearerr, fileno: stream status/ ..... ferror(3S)
and print process accounting file(s) acctcom: search ... acctcom(1)
merge or add total accounting files acctmerg: ........... acctmerg(1M)
create and administer SCCS files admin: .............. admin(1)
cmp: compare two files ...................... cmp(1)
lines common to two sorted files comm: select or reject comm(1)
/file directory and master files containing device/ ... master(4)
cp, ln, mv: copy, link or move files ...................... cp(1)
mark differences between files diffmk: ............. diffmk(1)
file header for common object files filehdr: ............ filehdr(4)
find: find files ...................... find(1)
troff font: description files for device-independent font(5)
frec: recover files from a backup tape ... frec(1M)
tread: read file(s) from tape .......... tread(1)
format specification in text files fspec: .............. fspec(4)
fsplit: split f77 or ratfor files ...................... fsplit(1)
ident: identify files ...................... ident(1)
on disk. fsync: Synchronize a file's in-core state with that fsync(2)
to DG/UX System special files intro: introduction . intro(7)
link editor for common object files ld: ................. ld(1)
lockf: record locking on files ...................... lockf(3C)
family line printer special files lp: DGC AViiON ...... lp(7)
listing for macro files /produce cross-reference macref(1)
rm, rmdir: remove, delete files or directories ....... rm(1)
unpack: compress and expand files pack, pcat, ......... pack(1)
pr: print files ...................... pr(1)
other information about RCS files /print log messages and rlog(1)
section sizes of common object files size: print ......... size(1)
sort: sort and/or merge files ...................... sort(1)
/Return the number of open files the current process can/ getdtablesize(2)
cat: concatenate and type files to standard output ... cat(1)
what: identify SCCS files ...................... what(1)
daily/weekly DG/UX system/ filesave, tapesave: ........ filesave(1M)
entry /setfsent, endfsent: get filesystem descriptor file . getfsent(3)
organization filesystem: file system .... filesystem(7)
/get directory entries in a filesystem-independent format getdents(2)
umount: mount and dismount filesystems mount, ........ mount(1M)
sigfillset: Fill in the set of/ ........ sigfillset(2)
DG/UX pg: file perusal filter for CRT terminals in pg(1)
more, page: file perusal filter for CRT viewing ..... more(1)
nl: line numbering filter ..................... nl(1)
col: filter reverse line-feeds .. col(1)
find: find files ................. find(1)
find: find files ........... find(1)
hyphen: find hyphenated words ...... hyphen(1)
ttyname, isatty: find name of a terminal .... ttyname(3C)
Licensed material--property of copyright holder(s) Page 29
index(0) DG/UX 4.30 index(0)
object library lorder: find ordering relation for an lorder(1)
hashmake, spellin, hashcheck: find spelling errors spell, spell(1)
an object or other/ strings: find the printable strings in strings(1)
of the current user ttyslot: find the slot in the utmp file ttyslot(3C)
IEEE floating-point routines finite, unordered, copysign: ieeefp(3C)
fold: fold long lines for finite width output device . fold(1)
head: give first few lines ............ head(1)
index: Search for the first occurrence of a/ ..... index(3C)
/Return the position of the first set bit in an integer. ffs(3C)
dbminit, fetch, store, delete, firstkey, nextkey: data base/ dbm(3X)
tee: pipe fitting .................... tee(1)
/fpgetsticky, fpsetsticky: IEEE floating-point environment/ fpgetround(3C)
isnand, isnanf: test for floating-point NaN/ isnan, isnan(3C)
ecvt, fcvt, gcvt: convert floating-point number to/ .. ecvt(3)
modf: manipulate parts of floating-point numbers /ldexp, frexp(3C)
drem: IEEE floating-point remainder ... drem(3M)
/unordered, copysign: IEEE floating-point routines .... ieeefp(3C)
floor, ceiling, remainder,/ floor, ceil, fmod, fabs: ... floor(3M)
floor, ceil, fmod, fabs: floor, ceiling, remainder,/ floor(3M)
cflow: generate C flow graph ................. cflow(1)
fclose, fflush: close or flush a stream ............. fclose(3S)
the process normally. exit: Flush buffers and terminate exit(3C)
/msqrt, mcmp, move, min, omin, fmin, m_in, mout, omout,/ .. mp(3X)
remainder,/ floor, ceil, fmod, fabs: floor, ceiling, floor(3M)
/omin, fmin, m_in, mout, omout, fmout, m_out, sdiv, itom:/ . mp(3X)
finite width output device fold: fold long lines for .. fold(1)
width output device fold: fold long lines for finite . fold(1)
device-independent troff font: description files for font(5)
stream fopen, freopen, fdopen: open a fopen(3S)
tcgetpgrp: Get foreground process group ID. tcgetpgrp(3)
tcsetpgrp: Set foreground process group ID. tcsetpgrp(3)
fork: Create a new process. fork(2)
per-process accounting file format acct: .............. acct(4)
fs: file system format ..................... fs(4)
in a filesystem-independent format /get directory entries getdents(2)
ar: common archive file format in DG/UX ............ ar(4)
in text for troff eqn: format mathematical equations eqn(1)
nroff neqn: format mathematical tables for neqn(1)
newform: change the format of a text file ...... newform(1)
core: format of core image file .. core(4)
cpio: format of cpio archive ..... cpio(4)
file. scr_dump: format of curses screen image scr_dump(4)
system description/ system: format of DGC AViiON computer system(4)
rcsfile: format of RCS file ......... rcsfile(4)
sccsfile: format of SCCS file ........ sccsfile(4)
files fspec: format specification in text fspec(4)
object file symbol table format syms: common ....... syms(4)
troff tbl: format tables for nroff or . tbl(1)
nroff: format text ................ nroff(1)
intro: introduction to file formats .................... intro(4)
wtmp: utmp and wtmp entry formats utmp, ............. utmp(4)
scanf, fscanf, sscanf: convert formatted input ............ scanf(3S)
Licensed material--property of copyright holder(s) Page 30
index(0) DG/UX 4.30 index(0)
/vfscanf, vsscanf: convert formatted input using varargs/ vscanf(3S)
/vfprintf, vsprintf: print formatted output of a varargs/ vprintf(3S)
fprintf, sprintf: print formatted output printf, .. printf(3S)
or/ checkmm: checks documents formatted with mm macros, eqn checkmm(1)
mm: print documents formatted with the MM macros mm(1)
mptx: the macro package for formatting a permuted index mptx(5)
troff: text formatting and typesetting . troff(1)
mm: the MM macro package for formatting documents ....... mm(5)
manual man: macros for formatting entries in this . man(5)
ms: text formatting macros .......... ms(5)
ratfor: rational FORTRAN dialect ............ ratfor(1)
pathname variables. pathconf, fpathconf: Get configurable pathconf(2)
fpgetround, fpsetround, fpgetmask, fpsetmask,/ ..... fpgetround(3C)
fpgetmask, fpsetmask,/ fpgetround, fpsetround, .... fpgetround(3C)
/fpgetmask, fpsetmask, fpgetsticky, fpsetsticky: IEEE/ fpgetround(3C)
formatted output printf, fprintf, sprintf: print .... printf(3S)
/fpsetround, fpgetmask, fpsetmask, fpgetsticky,/ ... fpgetround(3C)
fpsetmask,/ fpgetround, fpsetround, fpgetmask, ..... fpgetround(3C)
fpsetmask, fpgetsticky, fpsetsticky: IEEE/ /fpgetmask, fpgetround(3C)
word on a/ putc, putchar, fputc, putw: put character or putc(3S)
stream puts, fputs: put a string on a ... puts(3S)
to that contained in a signal frame. /the process state . sigret(2)
input/output fread, fwrite: binary ...... fread(3S)
backup tape frec: recover files from a . frec(1M)
t_free: free a library structure ... t_free(3N)
df: report number of free disk blocks and inodes df(1M)
memory allocator malloc, free, realloc, calloc: main malloc(3C)
mallopt, mallinfo:/ malloc, free, realloc, calloc, ..... malloc(3X)
fopen, freopen, fdopen: open a stream fopen(3S)
parts of floating-point/ frexp, ldexp, modf: manipulate frexp(3C)
fs: file system format ..... fs(4)
formatted input scanf, fscanf, sscanf: convert .... scanf(3S)
of file systems processed by fsck and ncheck /list ..... checklist(4)
consistency check and/ fsck: DG/UX file system .... fsck(1M)
fsdb: file system debugger . fsdb(1M)
fsetpos, ftell: reposition a/ fseek, rewind, fgetpos, .... fseek(3S)
file/ fseek, rewind, fgetpos, fsetpos, ftell: reposition a fseek(3S)
generation numbers fsirand: install random inode fsirand(1M)
text files fspec: format specification in fspec(4)
files fsplit: split f77 or ratfor fsplit(1)
about file systems fstab: static information .. fstab(4)
fstat: Get file status. .... fstat(2)
a mounted file system. fstatfs: Get information about fstatfs(2)
in-core state with that on/ fsync: Synchronize a file's fsync(2)
/rewind, fgetpos, fsetpos, ftell: reposition a file/ .. fseek(3S)
ftime: get date and time ... ftime(3C)
communication package ftok: standard interprocess stdipc(3C)
ftruncate: Truncate a file. ftruncate(2)
ftw: walk a file tree ...... ftw(3)
shutdown: Shut down part of a full-duplex connection. .... shutdown(2)
error/ erf, erfc: error function and complementary . erf(3M)
and complementary error function /erfc: error function erf(3M)
Licensed material--property of copyright holder(s) Page 31
index(0) DG/UX 4.30 index(0)
gamma: log gamma function ................... gamma(3M)
hypot: Euclidean distance function ................... hypot(3M)
of a common object file function /line number entries ldlread(3X)
matherr: error-handling function ................... matherr(3M)
prof: profile within a function ................... prof(5)
errno for/ dg_ext_errno: This function returns the extended dg_ext_errno(2)
math: math functions and constants .... math(5)
j0, j1, jn, y0, y1, yn: Bessel functions .................. bessel(3M)
cfsetospeed: Baud rate functions. /cfsetispeed, .. cfsetospeed(3)
password and file encryption functions crypt: .......... crypt(3X)
Perform device-control functions. dg_devctl: ..... dg_devctl(2)
logarithm, power, square root functions /sqrt: exponential, exp(3M)
remainder, absolute value functions /floor, ceiling, floor(3M)
to network library functions intro: introduction intro(3N)
sinh, cosh, tanh: hyperbolic functions .................. sinh(3M)
tcflush, tcflow: Line control functions. /tcdrain, ...... tcflush(3)
atan, atan2: trigonometric functions /tan, asin, acos, trig(3M)
using a file or file/ fuser: identify processes .. fuser(1M)
fread, fwrite: binary input/output fread(3S)
connect accounting records fwtmp, wtmpfix: manipulate . fwtmp(1M)
gamma: log gamma function ............. gamma(3M)
gamma: log gamma function .. gamma(3M)
gcc: GNU C language compiler gcc(1)
madd, msub, mult, mdiv, pow, gcd, invert, rpow, msqrt,/ . mp(3X)
number to string ecvt, fcvt, gcvt: convert floating-point ecvt(3)
from a document subj: generate a list of subjects subj(1)
abort: generate an IOT fault ...... abort(3C)
cflow: generate C flow graph ...... cflow(1)
cross-reference cxref: generate C program ......... cxref(1)
classification and/ chrtbl: generate character ......... chrtbl(1M)
by user id diskusg: generate disk accounting data diskusg(1M)
makekey: generate encryption key .... makekey(1)
ctermid: generate filename for terminal ctermid(3S)
crypt, setkey, encrypt: generate hashing encryption crypt(3)
ncheck: generate names from i-numbers ncheck(1M)
lexical tasks lex: generate programs for simple lex(1)
fsirand: install random inode generation numbers ......... fsirand(1M)
srand: simple random-number generator rand, ........... rand(3C)
/setstate: better random number generator; routines for/ ... random(3)
routines for changing generators /number generator; random(3)
getmsg: Get a message from a stream. getmsg(2)
semget: Get a set of semaphores. ... semget(2)
gets, fgets: get a string from a stream . gets(3S)
get: get a version of an SCCS file get(1)
tcgetattr, tcsetattr: Get and set state. ......... tcsetattr(3)
ulimit: Get and set user limits. ... ulimit(2)
the user sysv3_cuserid: get character login name of sysv3_cuserid(3S)
getc, getchar, fgetc, getw: get character or word from a/ getc(3S)
pathconf, fpathconf: Get configurable pathname/ . pathconf(2)
variables. sysconf: Get configurable system .... sysconf(2)
pathname getwd: get current working directory getwd(3)
ftime: get date and time .......... ftime(3C)
Licensed material--property of copyright holder(s) Page 32
index(0) DG/UX 4.30 index(0)
gettimeofday: Get date and time. ......... gettimeofday(2)
getdents: get directory entries in a/ getdents(2)
nlist: get entries from name list . nlist(3)
/endexportent, getexportopt: get exported file system/ .. exportent(3)
information. dg_fstat: Get extended file status ... dg_fstat(2)
information. dg_stat: Get extended file status ... dg_stat(2)
umask: Set and get file creation mask. .... umask(2)
dg_mstat: Get file status. ........... dg_mstat(2)
fstat: Get file status. ........... fstat(2)
lstat: Get file status. ........... lstat(2)
stat: Get file status. ........... stat(2)
file/ /endmntent, hasmntopt: get file system descriptor . getmntent(3)
statistics. ustat: Get file system device ..... ustat(2)
/getfstype, setfsent, endfsent: get filesystem descriptor file/ getfsent(3)
ID. tcgetpgrp: Get foreground process group tcgetpgrp(3)
file get: get a version of an SCCS get(1)
getgroups: Get group access list. ..... getgroups(2)
/setgrent, endgrent, fgetgrent: get group file entry ....... getgrent(3)
mounted file system. fstatfs: Get information about a .... fstatfs(2)
mounted file system. statfs: Get information about a .... statfs(2)
IPCs state. dg_ipc_info: Get information about current dg_ipc_info(2)
usage vtimes: get information about resource vtimes(3C)
utilization. getrusage: Get information about resource getrusage(2)
getlogin: get login name ............. getlogin(3C)
logname: get login name ............. logname(1)
msgget: Get message queue identifier. msgget(2)
getpw: get name from UID .......... getpw(3)
getpeername: Get name of connected peer. getpeername(2)
getdomainname: Get name of current domain. getdomainname(2)
gethostname: Get name of current host. .. gethostname(2)
system. uname: Get name of current UNIX ... uname(2)
/setnetent, endnetent: get network entry .......... getnetent(3N)
/endnetgrent, innetgr: get network group entry .... getnetgrent(3N)
/sethostent, endhostent: get network host entry ..... gethostent(3N)
unget: undo a previous get of an SCCS file ........ unget(1)
argument vector getopt: get option letter from ..... getopt(3)
getsockopt: Get options on a socket. ... getsockopt(2)
attributes or destroy/ msgctl: Get or set message queue ... msgctl(2)
getppid: Get parent process-id. ..... getppid(2)
/setpwfile, fgetpwent: get password file entry .... getpwent(3)
working directory getcwd: get pathname of current .... getcwd(3C)
times. times: Get process and child process times(2)
getpgrp2: Get process group. ......... getpgrp2(2)
getpgrp: Get process group ID. ...... getpgrp(2)
priority. getpriority: Get process scheduling ..... getpriority(2)
getpid: Get process-id. ............ getpid(2)
/setprotoent, endprotoent: get protocol entry ......... getprotoent(3N)
information t_getinfo: get protocol-specific service t_getinfo(3N)
rtime: get remote time ............ rtime(3N)
dg_getrootkey: Get root's secret key ...... dg_getrootkey(2)
getrpcbyname, getrpcbynumber: get RPC entry getrpcent, .. getrpcent(3N)
getrpcport: get RPC port number ........ getrpcport(3R)
Licensed material--property of copyright holder(s) Page 33
index(0) DG/UX 4.30 index(0)
/setservent, endservent: get service entry .......... getservent(3N)
shmget: Get shared memory segment. . shmget(2)
sigstack: Set and/or get signal stack context. .. sigstack(2)
getsockname: Get socket name. ........... getsockname(2)
consumption/ getrlimit: Get system resource ........ getrlimit(2)
time: Get system time. ........... time(2)
of the interval/ getitimer: get the current state of one getitimer(2)
t_getstate: get the current state ...... t_getstate(3N)
getegid: Get the effective-group-id. getegid(2)
geteuid: Get the effective-user-id. . geteuid(2)
tty: get the name of the terminal tty(1)
getgid: Get the real-group-id. ..... getgid(2)
getuid: Get the real-user-id. ...... getuid(2)
getpagesize: Get the system page size. .. getpagesize(2)
with the current/ cuserid: get the user name associated cuserid(3S)
current host. gethostid: Get unique identifier of ... gethostid(2)
get character or word from a/ getc, getchar, fgetc, getw: getc(3S)
character or word from/ getc, getchar, fgetc, getw: get .. getc(3S)
current working directory getcwd: get pathname of .... getcwd(3C)
entries in a/ getdents: get directory .... getdents(2)
current domain. getdomainname: Get name of . getdomainname(2)
number of open files the/ getdtablesize: Return the .. getdtablesize(2)
effective-group-id. getegid: Get the ........... getegid(2)
environment name getenv: return value for ... getenv(3C)
effective-user-id. geteuid: Get the ........... geteuid(2)
addexportent,/ exportent, getexportent, setexportent, exportent(3)
/remexportent, endexportent, getexportopt: get exported/ exportent(3)
of the export entry/ getfh: Return the file handle getfh(2)
getfsfile, getfstype,/ getfsent, getfsspec, ....... getfsent(3)
getfsent, getfsspec, getfsfile, getfstype,/ ..... getfsent(3)
getfstype,/ getfsent, getfsspec, getfsfile, ...... getfsent(3)
get/ /getfsspec, getfsfile, getfstype, setfsent, endfsent: getfsent(3)
getgid: Get the real-group-id. getgid(2)
setgrent, endgrent,/ getgrent, getgrgid, getgrnam, getgrent(3)
endgrent,/ getgrent, getgrgid, getgrnam, setgrent, getgrent(3)
getgrent, getgrgid, getgrnam, setgrent, endgrent,/ getgrent(3)
list. getgroups: Get group access getgroups(2)
sethostent,/ gethostent, gethostbyaddr, gethostbyname, gethostent(3N)
gethostent, gethostbyaddr, gethostbyname, sethostent,/ gethostent(3N)
gethostbyname, sethostent,/ gethostent, gethostbyaddr, . gethostent(3N)
identifier of current host. gethostid: Get unique ...... gethostid(2)
current host. gethostname: Get name of ... gethostname(2)
state of one of the interval/ getitimer: get the current . getitimer(2)
getlogin: get login name ... getlogin(3C)
addmntent, endmntent,/ getmntent, setmntent, ...... getmntent(3)
stream. getmsg: Get a message from a getmsg(2)
/key_gendes, key_setsecret, get_myaddress, getnetname,/ rpc(3N)
setnetent,/ getnetent, getnetbyaddr, getnetbyname, getnetent(3N)
getnetent, getnetbyaddr, getnetbyname, setnetent,/ .. getnetent(3N)
getnetbyname, setnetent,/ getnetent, getnetbyaddr, ... getnetent(3N)
endnetgrent, innetgr: get/ getnetgrent, setnetgrent, .. getnetgrent(3N)
/key_setsecret, get_myaddress, getnetname, netname2host,/ . rpc(3N)
Licensed material--property of copyright holder(s) Page 34
index(0) DG/UX 4.30 index(0)
argument vector getopt: get option letter from getopt(3)
getopt: parse command options getopt(1)
options getopts, getoptcvt: parse command ... getopts(1)
command options getopts, getoptcvt: parse .. getopts(1)
page size. getpagesize: Get the system getpagesize(2)
getpass: read a password ... getpass(3)
connected peer. getpeername: Get name of ... getpeername(2)
getpgrp: Get process group ID. getpgrp(2)
getpgrp2: Get process group. getpgrp2(2)
getpid: Get process-id. .... getpid(2)
process-id. getppid: Get parent ........ getppid(2)
scheduling priority. getpriority: Get process ... getpriority(2)
getprotoent, getprotobynumber, getprotobyname, setprotoent,/ getprotoent(3N)
getprotobyname,/ getprotoent, getprotobynumber, .......... getprotoent(3N)
getprotobyname, setprotoent,/ getprotoent, getprotobynumber, getprotoent(3N)
contents of the processor/ getpsr: Return the current . getpsr(2)
getpw: get name from UID ... getpw(3)
setpwent, endpwent,/ getpwent, getpwuid, getpwnam, getpwent(3)
getpwent, getpwuid, getpwnam, setpwent, endpwent,/ getpwent(3)
endpwent,/ getpwent, getpwuid, getpwnam, setpwent, getpwent(3)
consumption limits. getrlimit: Get system resource getrlimit(2)
get RPC entry getrpcent, getrpcbyname, getrpcbynumber: getrpcent(3N)
getrpcent, getrpcbyname, getrpcbynumber: get RPC entry getrpcent(3N)
getrpcbynumber: get RPC entry getrpcent, getrpcbyname, ... getrpcent(3N)
number getrpcport: get RPC port ... getrpcport(3R)
about resource utilization. getrusage: Get information . getrusage(2)
a stream gets, fgets: get a string from gets(3S)
getservent, getservbyport, getservbyname, setservent,/ getservent(3N)
setservent,/ getservent, getservbyport, getservbyname, getservent(3N)
getservbyname, setservent,/ getservent, getservbyport, . getservent(3N)
getsockname: Get socket name. getsockname(2)
socket. getsockopt: Get options on a getsockopt(2)
time. gettimeofday: Get date and . gettimeofday(2)
and terminal settings used by getty gettydefs: speed .... gettydefs(4)
modes, speed, and line/ getty: set terminal type, .. getty(1M)
ct: spawn getty to a remote terminal . ct(1)
settings used by getty gettydefs: speed and terminal gettydefs(4)
getuid: Get the real-user-id. getuid(2)
pututline, setutent,/ getutent, getutid, getutline, getut(3)
setutent, endutent,/ getutent, getutid, getutline, pututline, getut(3)
setutent,/ getutent, getutid, getutline, pututline, ...... getut(3)
from a/ getc, getchar, fgetc, getw: get character or word getc(3S)
directory pathname getwd: get current working . getwd(3)
head: give first few lines ....... head(1)
common terms and symbols glossary: definitions of ... glossary(1)
ascftime,/ ctime, localtime, gmtime, asctime, cftime, ... ctime(3C)
gcc: GNU C language compiler .... gcc(1)
setjmp, longjmp: non-local goto ....................... setjmp(3C)
and start the lock reclaim grace period. /lock database dg_lock_reset(2)
drawing graphs grap: pic preprocessor for . grap(1)
cflow: generate C flow graph ...................... cflow(1)
AViiON 300 series workstation graphics processor grfx: .. grfx(7)
Licensed material--property of copyright holder(s) Page 35
index(0) DG/UX 4.30 index(0)
mvt: typeset view graphs and slides .......... mvt(1)
pic preprocessor for drawing graphs grap: .............. grap(1)
file for a pattern grep, egrep, fgrep: search a grep(1)
workstation graphics/ grfx: AViiON 300 series .... grfx(7)
getgroups: Get group access list. ......... getgroups(2)
initgroups: initialize group access list .......... initgroups(3)
setgroups: Set group access list. ......... setgroups(2)
chown, chgrp: change owner or group ...................... chown(1)
innetgr: get network group entry /endnetgrent, . getnetgrent(3N)
endgrent, fgetgrent: get group file entry /setgrent, getgrent(3)
group: group file ................. group(4)
getpgrp2: Get process group. ..................... getpgrp2(2)
group: group file .......... group(4)
setpgid: Set process group ID for job control. .. setpgid(2)
getpgrp: Get process group ID. .................. getpgrp(2)
chown: Change user id and group id of a file. ........ chown(2)
fchown: Change user id and group id of a file. ........ fchown(2)
Create session and set process group ID. setsid: ......... setsid(2)
Get foreground process group ID. tcgetpgrp: ...... tcgetpgrp(3)
Set foreground process group ID. tcsetpgrp: ...... tcsetpgrp(3)
id: print user and group IDs and names ........ id(1)
to a process or a process group. killpg: Send signal killpg(2)
groups: show group memberships .......... groups(1)
newgrp: log in to a new group ...................... newgrp(1)
/networks, passwd, protocols, group or services information/ bcs_cat(1M)
update, and regenerate groups of programs /maintain, make(1)
groups: show group memberships groups(1)
checkers pwck, grpck: password/group file . pwck(1M)
ssignal, gsignal: software signals .. ssignal(3)
processor halt: stop the DG/UX System halt(1M)
reboot: Reboot halts the system processor(s). reboot(2)
getfh: Return the file handle of the export entry/ getfh(2)
varargs: handle variable argument list varargs(5)
re_exec: regular expression handler in DG/UX /re_comp, berk_regex(3)
curses: terminal screen handling and optimization/ . curses(3X)
setchrclass: character handling /_tolower, _toupper, ctype(3C)
terminal. vhangup: Virtually hang up the current control vhangup(2)
nohup: run a command immune to hangups and quits .......... nohup(1)
hcreate, hdestroy: manage hash search tables hsearch, hsearch(3)
spell, hashmake, spellin, hashcheck: find spelling/ .. spell(1)
setkey, encrypt: generate hashing encryption crypt, . crypt(3)
find spelling errors spell, hashmake, spellin, hashcheck: spell(1)
/addmntent, endmntent, hasmntopt: get file system/ getmntent(3)
hken: Hawk Ethernet interface .... hken(7)
search tables hsearch, hcreate, hdestroy: manage hash hsearch(3)
tables hsearch, hcreate, hdestroy: manage hash search hsearch(3)
head: give first few lines . head(1)
filehdr: file header for common object files filehdr(4)
limits: file header for/ ................ limits(4)
/read an indexed/named section header of a common object file ldshread(3X)
ldahread: Read the archive header of a member of an/ .. ldahread(3X)
ldsyshread: read the system header of an executable file/ ldsyshread(3X)
Licensed material--property of copyright holder(s) Page 36
index(0) DG/UX 4.30 index(0)
ldfhread: read the file header of an object file ... ldfhread(3X)
/seek to the optional file header of an object file ... ldohseek(3X)
dg_lock_kill: Remove locks held by remote lock clients. dg_lock_kill(2)
helpadm: make changes to the Help Facility database ..... helpadm(1M)
help: Help Facility .............. help(1)
help: Help Facility ........ help(1)
Help Facility database helpadm: make changes to the helpadm(1M)
Determine if a character is hexadecimal. ishex: ....... ishex(3C)
hfm: high sierra file manager hfm(4)
hierarchy hier: DG/UX file system .... hier(5)
hier: DG/UX file system hierarchy .................. hier(5)
hfm: high sierra file manager ... hfm(4)
nice: run a command at a higher or lower priority ... nice(1)
hken: Hawk Ethernet interface hken(7)
information used to/ holidays: accounting ....... holidays(4)
/ntohs: convert values between host and network byte order byteorder(3N)
endhostent: get network host entry /sethostent, ... gethostent(3N)
unique identifier of current host. gethostid: Get ...... gethostid(2)
Get name of current host. gethostname: ........ gethostname(2)
piping communications within a host in DG/UX unix_ipc: ... unix_ipc(6F)
unique identifier of current host. sethostid: Set ...... sethostid(2)
Set name of current host. sethostname: ........ sethostname(2)
clntudp_create, host2netname,/ /clnttcp_create, rpc(3N)
protocols,/ bcs_cat: type hosts, networks, passwd, ... bcs_cat(1M)
manage hash search tables hsearch, hcreate, hdestroy: hsearch(3)
convert values between host/ htonl, htons, ntohl, ntohs: byteorder(3N)
values between host/ htonl, htons, ntohl, ntohs: convert byteorder(3N)
sinh, cosh, tanh: hyperbolic functions ....... sinh(3M)
hyphen: find hyphenated words hyphen(1)
hyphen: find hyphenated words ........... hyphen(1)
function hypot: Euclidean distance .. hypot(3M)
provide/ dghost, m68k, m88k, i386, pdp11, u3b, u3b5, vax: machid(1)
for reading and writing IBM and ANSI tapes /commands reelexchange_intro(1)
chown: Change user id and group id of a file. . chown(2)
fchown: Change user id and group id of a file. . fchown(2)
disk accounting data by user id diskusg: generate ...... diskusg(1M)
setpgid: Set process group ID for job control. ........ setpgid(2)
getpgrp: Get process group ID. ........................ getpgrp(2)
semaphore, or shared memory id ipcrm: remove message, . ipcrm(1)
Change user id and group id of a file. chown: ...... chown(2)
Change user id and group id of a file. fchown: ..... fchown(2)
and names id: print user and group IDs id(1)
session and set process group ID. setsid: Create ........ setsid(2)
Get foreground process group ID. tcgetpgrp: ............ tcgetpgrp(3)
Set foreground process group ID. tcsetpgrp: ............ tcsetpgrp(3)
ident: identify files ...... ident(1)
issue: issue identification file ........ issue(4)
/information for a process identified by a process key dg_file_info(2)
an NFS daemon on the socket identified by <socket>. /Start nfssvc(2)
msgget: Get message queue identifier. ................ msgget(2)
gethostid: Get unique identifier of current host. gethostid(2)
sethostid: Set unique identifier of current host. sethostid(2)
Licensed material--property of copyright holder(s) Page 37
index(0) DG/UX 4.30 index(0)
display the unique system identifier systemid: ...... systemid(1M)
keywords locate: identify a command using ... locate(1)
ident: identify files ............. ident(1)
file or file structure fuser: identify processes using a . fuser(1M)
what: identify SCCS files ........ what(1)
id: print user and group IDs and names .............. id(1)
/fpgetsticky, fpsetsticky: IEEE floating-point/ ....... fpgetround(3C)
drem: IEEE floating-point remainder drem(3M)
finite, unordered, copysign: IEEE floating-point routines ieeefp(3C)
ishex: Determine if a character is hexadecimal. ishex(3C)
signal action of a signal to 'ignore'. sigignore: Set the sigignore(2)
core: format of core image file ................. core(4)
format of curses screen image file. scr_dump: ..... scr_dump(4)
di10: Postprocessor for the IMAGEN laser printer ....... di10(1)
crash: examine system images ..................... crash(1M)
nohup: run a command immune to hangups and quits nohup(1)
/strings from C programs to implement shared strings in/ xstr(1)
sigfillset: Fill in the set of implementation-defined/ .... sigfillset(2)
limits: file header for implementation-specific/ ... limits(4)
fsync: Synchronize a file's in-core state with that on/ fsync(2)
dump2: incremental file system backup dump2(1M)
dump: incremental file system dump dump(1M)
file system restore: incrementally restore a DG/UX restore(1M)
dirent: file system independent directory entry dirent(4)
/tgoto, tputs: terminal independent operation routines termcap(3X)
for formatting a permuted index mptx: the macro package mptx(5)
ndx: create a subject-page index ...................... ndx(1)
an object/ ldtbindex: compute index of symbol table entry of ldtbindex(3X)
ptx: permuted index ...................... ptx(1)
occurrence of a character in/ index: Search for the first index(3C)
an object/ ldtbread: read an indexed symbol table entry of ldtbread(3X)
ldshread, ldnshread: read an indexed/named section header/ ldshread(3X)
ldsseek, ldnsseek: seek to an indexed/named section of a/ ldsseek(3X)
and teletypes last: indicate last logins of users last(1)
receipt of an orderly release indication /acknowledge ... t_rcvrel(3N)
receive a unit data error indication t_rcvuderr: .... t_rcvuderr(3N)
interface inen: integrated Ethernet .. inen(7)
inet_ntoa, inet_makeaddr,/ inet_addr, inet_network, ... inet(3N)
/inet_ntoa, inet_makeaddr, inet_lnaof, inet_netof: .... inet(3N)
/inet_network, inet_ntoa, inet_makeaddr, inet_lnaof,/ inet(3N)
inet_makeaddr, inet_lnaof, inet_netof: /inet_ntoa, ... inet(3N)
inet_makeaddr,/ inet_addr, inet_network, inet_ntoa, ... inet(3N)
inet_addr, inet_network, inet_ntoa, inet_makeaddr,/ . inet(3N)
terminfo descriptions infocmp: compare or print out infocmp(1M)
file system. fstatfs: Get information about a mounted fstatfs(2)
file system. statfs: Get information about a mounted statfs(2)
state. dg_ipc_info: Get information about current IPCs dg_ipc_info(2)
fstab: static information about file systems fstab(4)
/print log messages and other information about RCS files rlog(1)
usage vtimes: get information about resource . vtimes(3C)
utilization. getrusage: Get information about resource . getrusage(2)
dg_process_info: Returns information about the system's/ dg_process_info(2)
Licensed material--property of copyright holder(s) Page 38
index(0) DG/UX 4.30 index(0)
Get extended file status information. dg_fstat: .... dg_fstat(2)
Get extended file status information. dg_stat: ..... dg_stat(2)
the caller with certain system information. /routine supplies dg_sys_info(2)
dumpfs: dump DG/UX file system information ................ dumpfs(1M)
get exported file system information /getexportopt: exportent(3)
object file reloc: relocation information for a common ... reloc(4)
identified/ /return file usage information for a process .. dg_file_info(2)
users starter: information for beginning .. starter(1)
strip: strip non-executable information from an executable/ strip(1)
t_rcvdis: retrieve information from disconnect t_rcvdis(3N)
print LP lineprinter status information lpstat: ....... lpstat(1)
master files containing device information /directory and master(4)
memory resident file system information. /disk and .... sync(2)
get protocol-specific service information t_getinfo: .... t_getinfo(3N)
/protocols, group or services information to standard output bcs_cat(1M)
holidays: accounting information used to/ ....... holidays(4)
inittab: script for the init process ............... inittab(4)
initialization init, telinit: process control init(1M)
access list initgroups: initialize group initgroups(3)
init, telinit: process control initialization ............. init(1M)
volume label tlabel: initialize a tape with a ... tlabel(1)
initgroups: initialize group access list initgroups(3)
socket. connect: Initiate a connection on a . connect(2)
tape taccess: initiate access to labeled . taccess(1)
t_sndrel: initiate an orderly release t_sndrel(3N)
process popen, pclose: initiate pipe to/from a .... popen(3S)
random/ random, srandom, initstate, setstate: better random(3)
process inittab: script for the init inittab(4)
/setnetgrent, endnetgrent, innetgr: get network group/ getnetgrent(3N)
clri: clear inode ...................... clri(1M)
inode: file node structure . inode(4)
fsirand: install random inode generation numbers ... fsirand(1M)
number of free disk blocks and inodes df: report ......... df(1M)
sscanf: convert formatted input scanf, fscanf, ...... scanf(3S)
push character back into input stream ungetc: ...... ungetc(3S)
/vsscanf: convert formatted input using varargs argument/ vscanf(3S)
fread, fwrite: binary input/output ............... fread(3S)
stdio: standard buffered input/output package ....... stdio(3S)
fileno: stream status inquiries /feof, clearerr, ferror(3S)
uustat: uucp status inquiry and job control .... uustat(1)
adapter subsystem insc: AViiON family SCSI ... insc(7)
circular queue. insque: Add an element to a insque(3C)
install: install commands ........... install(1M)
install: install commands .. install(1M)
generation numbers fsirand: install random inode ....... fsirand(1M)
abs, labs: return integer absolute value ..... abs(3C)
/l64a: convert between long integer and base-64 ASCII/ . a64l(3)
sdiv, itom: multiple precision integer arithmetic /m_out, mp(3X)
sputl, sgetl: access long integer data in a/ ......... sputl(3X)
of the first set bit in an integer. /Return the position ffs(3C)
atol, atoi: convert string to integer strtol, strtoul, .. strtol(3C)
/ltol3: convert between 3-byte integers and long integers . l3tol(3)
Licensed material--property of copyright holder(s) Page 39
index(0) DG/UX 4.30 index(0)
3-byte integers and long integers /convert between . l3tol(3)
inen: integrated Ethernet interface inen(7)
syac: AViiON family intelligent asynchronous/ .. syac(7)
system mailx: interactive message processing mailx(1)
system consistency check and interactive repair /DG/UX file fsck(1M)
dsk: block special disk interface .................. dsk(7)
err: error-logging interface .................. err(7)
physical and/ diskman: menu interface for managing ..... diskman(1M)
hken: Hawk Ethernet interface .................. hken(7)
inen: integrated Ethernet interface .................. inen(7)
pseudo lock manager device interface plm: ............ plm(7)
rdsk: character special disk interface .................. rdsk(7)
special magnetic tape interface rmt: character .. rmt(7)
termio: AT&T terminal interface .................. termio(7)
logging and event/ log: interface to STREAMS error . log(7)
tty: BSD terminal interface .................. tty(7)
Yellow Pages client interface /ypprot_err: .... ypclnt(3N)
swapon: Add a swap device for interleaved paging/swapping. swapon(2)
spline: interpolate smooth curve ... spline(1G)
characters asa: interpret ASA carriage control asa(1)
sno: SNOBOL interpreter and compiler ... sno(1)
csh: invoke a shell (command interpreter) having a C-like/ csh(1)
pipe: Create an interprocess channel. ...... pipe(2)
facilities/ ipcs: report inter-process communication ipcs(1)
package ftok: standard interprocess communication . stdipc(3C)
suspend execution for an interval sleep: ........... sleep(1)
sleep: suspend execution for interval ................... sleep(3C)
current state of one of the interval timers /get the .. getitimer(2)
setitimer: Sets one of the interval timers. ........... setitimer(2)
/convert a termcap description into a terminfo description captoinfo(1M)
ungetc: push character back into input stream .......... ungetc(3S)
Lock data, text, or both into memory. plock: ....... plock(2)
split: split a file into pieces ................ split(1)
commands and application/ intro: introduction to ..... intro(1)
System special files intro: introduction to DG/UX intro(7)
formats intro: introduction to file intro(4)
miscellany intro: introduction to ..... intro(5)
library functions intro: introduction to network intro(3N)
subroutines and libraries intro: introduction to ..... intro(3)
calls and error numbers intro: introduction to system intro(2)
maintenance commands and/ intro: introduction to system intro(1M)
maintenance procedures intro: introduction to system intro(8)
application programs intro: introduction to commands and intro(1)
special files intro: introduction to DG/UX System intro(7)
intro: introduction to file formats intro(4)
intro: introduction to miscellany . intro(5)
library functions intro: introduction to network .... intro(3N)
rcsintro: introduction to RCS commands rcsintro(1)
and libraries intro: introduction to subroutines intro(3)
and error numbers intro: introduction to system calls intro(2)
maintenance commands/ intro: introduction to system ..... intro(1M)
maintenance procedures intro: introduction to system ..... intro(8)
Licensed material--property of copyright holder(s) Page 40
index(0) DG/UX 4.30 index(0)
ncheck: generate names from i-numbers .................. ncheck(1M)
/msub, mult, mdiv, pow, gcd, invert, rpow, msqrt, mcmp,/ mp(3X)
interpreter) having a/ csh: invoke a shell (command .... csh(1)
select: Wait for I/O conditions. ............ select(2)
streamio: STREAMS ioctl commands ............. streamio(7)
ioctl: Control device. ..... ioctl(2)
abort: generate an IOT fault .................. abort(3C)
semaphore, or shared memory/ ipcrm: remove message, ..... ipcrm(1)
communication facilities/ ipcs: report inter-process . ipcs(1)
Get information about current IPCs state. dg_ipc_info: .. dg_ipc_info(2)
/islower, isupper, isalpha, isalnum, isspace, iscntrl,/ ctype(3C)
/isxdigit, islower, isupper, isalpha, isalnum, isspace,/ ctype(3C)
/ispunct, isprint, isgraph, isascii, tolower, toupper,/ ctype(3C)
terminal ttyname, isatty: find name of a ..... ttyname(3C)
/isalpha, isalnum, isspace, iscntrl, ispunct, isprint,/ ctype(3C)
isupper, isalpha, isalnum,/ isdigit, isxdigit, islower, ctype(3C)
/iscntrl, ispunct, isprint, isgraph, isascii, tolower,/ ctype(3C)
character is hexadecimal. ishex: Determine if a ...... ishex(3C)
isalnum,/ isdigit, isxdigit, islower, isupper, isalpha, . ctype(3C)
for floating-point NaN/ isnan, isnand, isnanf: test isnan(3C)
floating-point NaN/ isnan, isnand, isnanf: test for ... isnan(3C)
floating-point/ isnan, isnand, isnanf: test for ........... isnan(3C)
/isspace, iscntrl, ispunct, isprint, isgraph, isascii,/ ctype(3C)
/isalnum, isspace, iscntrl, ispunct, isprint, isgraph,/ ctype(3C)
/isupper, isalpha, isalnum, isspace, iscntrl, ispunct,/ ctype(3C)
system: issue a shell command ...... system(3S)
issue: issue identification file .. issue(4)
file issue: issue identification issue(4)
isdigit, isxdigit, islower, isupper, isalpha, isalnum,/ ctype(3C)
isalpha, isalnum,/ isdigit, isxdigit, islower, isupper, ctype(3C)
news: print news items ...................... news(1)
/omout, fmout, m_out, sdiv, itom: multiple precision/ .. mp(3X)
functions j0, j1, jn, y0, y1, yn: Bessel bessel(3M)
functions j0, j1, jn, y0, y1, yn: Bessel . bessel(3M)
functions j0, j1, jn, y0, y1, yn: Bessel ..... bessel(3M)
DG/UX jobs: summary of job control facilities in .. jobs(3)
Set process group ID for job control. setpgid: ..... setpgid(2)
uucp status inquiry and job control uustat: ....... uustat(1)
spooling queue lprm: remove jobs from the line printer . lprm(1)
facilities in DG/UX jobs: summary of job control jobs(3)
operator join: relational database .. join(1)
/lrand48, nrand48, mrand48, jrand48, srand48, seed48, .. drand48(3)
siglongjmp: Non-local jumps. sigsetjmp, ......... sigsetjmp(3)
workstation system keyboard kbd: AViiON 300 series ..... kbd(7)
kmem: kernel logical memory ...... kmem(7)
with the client/server common key. /a conversation key .. dg_decryptsessionkey(2)
with the client/server common key. /a conversation key .. dg_encryptsessionkey(2)
identified by a process key /information for a process dg_file_info(2)
Get root's secret key dg_getrootkey: ........ dg_getrootkey(2)
/Store a client's secret key in the keyserver. ...... dg_setsecretkey(2)
makekey: generate encryption key ........................ makekey(1)
common/ /Decrypt a conversation key with the client/server . dg_decryptsessionkey(2)
Licensed material--property of copyright holder(s) Page 41
index(0) DG/UX 4.30 index(0)
common/ /Encrypt a conversation key with the client/server . dg_encryptsessionkey(2)
300 series workstation system keyboard kbd: AViiON ...... kbd(7)
/clntudp_create, host2netname, key_decryptsession,/ ....... rpc(3N)
/key_decryptsession, key_encryptsession,/ ....... rpc(3N)
/key_encryptsession, key_gendes, key_setsecret,/ rpc(3N)
a client's secret key in the keyserver. /Store ......... dg_setsecretkey(2)
getnetname,/ /key_gendes, key_setsecret, get_myaddress, rpc(3N)
identify a command using keywords locate: .......... locate(1)
killall: kill all active processes .. killall(1M)
process. kill: Send a signal to a ... kill(2)
kill: terminate a process .. kill(1)
processes killall: kill all active ... killall(1M)
process or a process group. killpg: Send signal to a ... killpg(2)
kmem: kernel logical memory kmem(7)
3-byte integers and long/ l3tol, ltol3: convert between l3tol(3)
integer and base-64/ a64l, l64a: convert between long . a64l(3)
parameters tkey: set label and data translation . tkey(1)
settings tdisplay: display label and record translation tdisplay(1)
copy file systems with label checking /labelit: .. volcopy(1M)
a tape with a volume label tlabel: initialize .. tlabel(1)
taccess: initiate access to labeled tape ............... taccess(1)
with label checking volcopy, labelit: copy file systems . volcopy(1M)
dump2label: read and write labels for dump tapes ...... dump2label(1M)
value abs, labs: return integer absolute abs(3C)
scanning and processing language awk: pattern ..... awk(1)
arbitrary-precision arithmetic language bc: .............. bc(1)
cc: C language compiler .......... cc(1)
gcc: GNU C language compiler .......... gcc(1)
scanning and processing language oawk: old pattern oawk(1)
cpp: the C language preprocessor ...... cpp(1)
shell, the command programming language sh, rsh: ......... sh(1)
preprocess MC88100 assembly language sifilter: ........ sifilter(1)
cftime: language specific strings .. cftime(4)
troff: description of output language ................... troff(5)
Postprocessor for the IMAGEN laser printer di10: ....... di10(1)
users and teletypes last: indicate last logins of last(1)
end, etext, edata: last locations in program .. end(3C)
teletypes last: indicate last logins of users and ... last(1)
in a/ rindex: Search for the last occurrence of a character rindex(3C)
tail: deliver the last part of a file ........ tail(1)
chargefee, ckpacct, dodisk, lastlogin, monacct, nulladm,/ acctsh(1M)
execute DG/UX commands at a later time at, batch: ..... at(1)
shl: shell layer manager in DG/UX ..... shl(1)
object files ld: link editor for common . ld(1)
ldclose, ldaclose: close an object file ldclose(3X)
header of a member of an/ ldahread: Read the archive . ldahread(3X)
for reading ldopen, ldaopen: open an object file ldopen(3X)
object file ldclose, ldaclose: close an ldclose(3X)
of floating-point/ frexp, ldexp, modf: manipulate parts frexp(3C)
routines in DG/UX ldfcn: executable file access ldfcn(4)
of an object file ldfhread: read the file header ldfhread(3X)
name for object file symbol/ ldgetname: retrieve symbol . ldgetname(3X)
Licensed material--property of copyright holder(s) Page 42
index(0) DG/UX 4.30 index(0)
remainder div, ldiv: compute quotient and . div(3C)
line number entries/ ldlread, ldlinit, ldlitem: manipulate ldlread(3X)
number/ ldlread, ldlinit, ldlitem: manipulate line ... ldlread(3X)
manipulate line number/ ldlread, ldlinit, ldlitem: . ldlread(3X)
line number entries of a/ ldlseek, ldnlseek: seek to . ldlseek(3X)
entries of a section/ ldlseek, ldnlseek: seek to line number ldlseek(3X)
entries of a section/ ldrseek, ldnrseek: seek to relocation ldrseek(3X)
indexed/named/ ldshread, ldnshread: read an ......... ldshread(3X)
indexed/named/ ldsseek, ldnsseek: seek to an ....... ldsseek(3X)
file header of an object file ldohseek: seek to the optional ldohseek(3X)
object file for reading ldopen, ldaopen: open an ... ldopen(3X)
relocation entries of a/ ldrseek, ldnrseek: seek to . ldrseek(3X)
indexed/named section header/ ldshread, ldnshread: read an ldshread(3X)
indexed/named section of a/ ldsseek, ldnsseek: seek to an ldsseek(3X)
header of an executable file/ ldsyshread: read the system ldsyshread(3X)
symbol table entry of an/ ldtbindex: compute index of ldtbindex(3X)
symbol table entry of an/ ldtbread: read an indexed .. ldtbread(3X)
table of an object file ldtbseek: seek to the symbol ldtbseek(3X)
Truncate a file to a specified length. truncate: ......... truncate(2)
getopt: get option letter from argument vector getopt(3)
simple lexical tasks lex: generate programs for . lex(1)
generate programs for simple lexical tasks lex: ........ lex(1)
update lsearch, lfind: linear search and ... lsearch(3)
to subroutines and libraries intro: introduction intro(3)
intro: introduction to network library functions .......... intro(3N)
relation for an object library lorder: find ordering lorder(1)
portable/ ar: archive and library maintainer for ..... ar(1)
/xdr_void, xdr_wrapstring: library routines for external/ xdr(3N)
procedure/ /xprt_unregister: library routines for remote rpc(3N)
t_alloc: allocate a library structure .......... t_alloc(3N)
t_free: free a library structure .......... t_free(3N)
t_sync: synchronize transport library .................... t_sync(3N)
implementation-specific/ limits: file header for .... limits(4)
/change or view the allocation limits for a control point/ cpd(1)
system resource consumption limits. getrlimit: Get .... getrlimit(2)
/Change the resource limits of a control point/ . dg_set_cpd_limits(2)
system resource consumption limits. setrlimit: Set .... setrlimit(2)
ulimit: Get and set user limits. .................... ulimit(2)
stream setlinebuf: Assign line buffering for a specified setlinebuf(3C)
an out-going terminal line connection /establish dial(3C)
/tcdrain, tcflush, tcflow: Line control functions. .... tcflush(3)
type, modes, speed, and line discipline /set terminal getty(1M)
type, modes, speed, and line discipline /set terminal uugetty(1M)
editread: command line editor ................ editread(5)
line: read one line ....................... line(1)
/ldlinit, ldlitem: manipulate line number entries of a/ .. ldlread(3X)
ldlseek, ldnlseek: seek to line number entries of a/ .. ldlseek(3X)
nl: line numbering filter ...... nl(1)
out selected fields of each line of a file cut: cut ... cut(1)
order of characters in each line of file rev: reverse . rev(1)
lpc: line printer control program lpc(8)
lpd: line printer daemon ........ lpd(8)
Licensed material--property of copyright holder(s) Page 43
index(0) DG/UX 4.30 index(0)
send/cancel requests to an LP line printer lp, cancel: .. lp(1)
lp: DGC AViiON family line printer special files . lp(7)
lpr: Send print requests to a line printer spooler ....... lpr(1)
lprm: remove jobs from the line printer spooling queue lprm(1)
line: read one line ........ line(1)
lsearch, lfind: linear search and update ... lsearch(3)
col: filter reverse line-feeds ................. col(1)
lpstat: print LP lineprinter status information lpstat(1)
files comm: select or reject lines common to two sorted . comm(1)
device fold: fold long lines for finite width output fold(1)
head: give first few lines ...................... head(1)
uniq: report repeated lines in a file ............ uniq(1)
paste: merge lines ...................... paste(1)
link, unlink: exercise link and unlink system calls link(1M)
file. link: Create a new link to a link(2)
files ld: link editor for common object ld(1)
a.out: common assembler and link editor output ......... a.out(4)
symlink: Create a symbolic link file. ................. symlink(2)
cp, ln, mv: copy, link or move files ......... cp(1)
the contents of a symbolic link. readlink: Read ...... readlink(2)
link: Create a new link to a file. ............ link(2)
and unlink system calls link, unlink: exercise link link(1M)
lint: a C program checker .. lint(1)
ls: list contents of directory . ls(1)
getgroups: Get group access list. ...................... getgroups(2)
initialize group access list initgroups: .......... initgroups(3)
nlist: get entries from name list ....................... nlist(3)
nm: print name list of common object file . nm(1)
by fsck and ncheck checklist: list of file systems processed checklist(4)
document subj: generate a list of subjects from a .... subj(1)
setgroups: Set group access list. ...................... setgroups(2)
handle variable argument list varargs: ............. varargs(5)
output of a varargs argument list /print formatted ..... vprintf(3S)
input using varargs argument list /convert formatted ... vscanf(3S)
t_listen: listen for a connect request t_listen(3N)
socket. listen: Listen for connections on a listen(2)
on a socket. listen: Listen for connections listen(2)
/produce cross-reference listing for macro files .... macref(1)
xargs: construct argument list(s) and execute command xargs(1)
files cp, ln, mv: copy, link or move . cp(1)
devices tcload: load terminal controller ... tcload(1M)
routines setlocale, localeconv: localization ... locale(3C)
setlocale, localeconv: localization routines ...... locale(3C)
cftime, ascftime,/ ctime, localtime, gmtime, asctime, ctime(3C)
csh(1) users which: locate a program file for .. which(1)
using keywords locate: identify a command . locate(1)
manual for program whereis: locate source, binary, and or whereis(1)
end, etext, edata: last locations in program ....... end(3C)
Remove locks held by remote lock clients. dg_lock_kill: dg_lock_kill(2)
memory. plock: Lock data, text, or both into plock(2)
lock/ /Reset the remote file lock database and start the dg_lock_reset(2)
plm: pseudo lock manager device interface plm(7)
Licensed material--property of copyright holder(s) Page 44
index(0) DG/UX 4.30 index(0)
/apply or remove an advisory lock on an open file in DG/UX dg_flock(3C)
mlockall, munlockall: lock or unlock address space mlockall(3C)
memory mlock, munlock: lock (or unlock) pages in .. mlock(3C)
/lock database and start the lock reclaim grace period. dg_lock_reset(2)
dg_lcntl: Process a record lock request on a filehandle. dg_lcntl(2)
/Wait for previously delayed lock requests to complete. . dg_lock_wait(2)
lockf: record locking on files lockf(3C)
lockf: record locking on files ........... lockf(3C)
clients. dg_lock_kill: Remove locks held by remote lock .. dg_lock_kill(2)
file for syslogd system log daemon /configuration . syslog.conf(5)
gamma: log gamma function ......... gamma(3M)
newgrp: log in to a new group ...... newgrp(1)
error logging and event/ log: interface to STREAMS .. log(7)
exponential, logarithm,/ exp, log, log10, pow, sqrt: ..... exp(3M)
make entries in the system log logger: ............... logger(1)
information about/ rlog: print log messages and other ..... rlog(1)
setlogmask: control system log /openlog, closelog, ... syslog(3)
syslogd: log systems messages ....... syslogd(8)
logarithm, power,/ exp, log, log10, pow, sqrt: exponential, exp(3M)
/log10, pow, sqrt: exponential, logarithm, power, square root/ exp(3M)
strclean: STREAMS error logger cleanup program ..... strclean(1M)
strerr: STREAMS error logger daemon .............. strerr(1M)
system log logger: make entries in the logger(1)
/interface to STREAMS error logging and event tracing .. log(7)
for managing physical and logical disks /menu interface diskman(1M)
kmem: kernel logical memory ............. kmem(7)
getlogin: get login name ................. getlogin(3C)
logname: get login name ................. logname(1)
sysv3_cuserid: get character login name of the user ..... sysv3_cuserid(3S)
logname: return login name of user ......... logname(3X)
passwd: change login password ............. passwd(1)
for dial-up devices d_passwd: log-in programs and passwords d_passwd(4)
login: sign on ............. login(1)
setting up an environment at login time profile: ....... profile(4)
last: indicate last logins of users and teletypes last(1)
logname: get login name .... logname(1)
user logname: return login name of logname(3X)
a64l, l64a: convert between long integer and base-64 ASCII/ a64l(3)
sputl, sgetl: access long integer data in a/ .... sputl(3X)
between 3-byte integers and long integers /ltol3: convert l3tol(3)
output device fold: fold long lines for finite width fold(1)
setjmp, longjmp: non-local goto .... setjmp(3C)
transport endpoint t_look: look at the current event on a t_look(3N)
for an object library lorder: find ordering relation lorder(1)
run a command at a higher or lower priority nice: ...... nice(1)
requests to an LP line/ lp, cancel: send/cancel .... lp(1)
printer special files lp: DGC AViiON family line . lp(7)
send/cancel requests to an LP line printer lp, cancel: lp(1)
information lpstat: print LP lineprinter status ...... lpstat(1)
disable: enable/disable LP printers enable, ....... enable(1)
/lpshut, lpmove: start/stop the LP request scheduler and move/ lpsched(1M)
accept, reject: allow/prevent LP requests ................ accept(1M)
Licensed material--property of copyright holder(s) Page 45
index(0) DG/UX 4.30 index(0)
lpadmin: configure the LP spooling system ......... lpadmin(1M)
spooling system lpadmin: configure the LP .. lpadmin(1M)
program lpc: line printer control .. lpc(8)
lpd: line printer daemon ... lpd(8)
request/ lpsched, lpshut, lpmove: start/stop the LP .. lpsched(1M)
program lpq: spool queue examination lpq(1)
line printer spooler lpr: Send print requests to a lpr(1)
line printer spooling queue lprm: remove jobs from the . lprm(1)
start/stop the LP request/ lpsched, lpshut, lpmove: ... lpsched(1M)
LP request scheduler/ lpsched, lpshut, lpmove: start/stop the lpsched(1M)
status information lpstat: print LP lineprinter lpstat(1)
jrand48,/ drand48, erand48, lrand48, nrand48, mrand48, . drand48(3)
ls: list contents of directory ls(1)
and update lsearch, lfind: linear search lsearch(3)
current position. lseek: Change object pointer's lseek(2)
lstat: Get file status. .... lstat(2)
integers and long/ l3tol, ltol3: convert between 3-byte l3tol(3)
m4: macro processor ........ m4(1)
u3b5, vax: provide/ dghost, m68k, m88k, i386, pdp11, u3b, machid(1)
vax: provide/ dghost, m68k, m88k, i386, pdp11, u3b, u3b5, machid(1)
values: machine-dependent values ... values(5)
/access long integer data in a machine-independent fashion sputl(3X)
cross-reference listing for/ macref: produce ............ macref(1)
cross-reference listing for macro files macref: produce macref(1)
permuted index mptx: the macro package for formatting a mptx(5)
documents mm: the MM macro package for formatting mm(5)
viewgraphs and/ mv: a troff macro package for typesetting mv(5)
m4: macro processor ............ m4(1)
documents formatted with mm macros, eqn or tbl /checks checkmm(1)
in this manual man: macros for formatting entries man(5)
formatted with the MM macros mm: print documents mm(1)
ms: text formatting macros ..................... ms(5)
gcd, invert, rpow, msqrt,/ madd, msub, mult, mdiv, pow, mp(3X)
rmt: start the remote mag tape daemon ............ rmt(1M)
wmtd: start the WORM magnetic tape device server wmtd(1M)
rmt: character special magnetic tape interface .... rmt(7)
program mt: magnetic tape manipulating . mt(1)
Multiple optical device) as magnetic tape /Once Read .. wmt(7)
send mail to users or read mail mail, rmail: ......... mail(1)
users or read mail mail, rmail: send mail to .. mail(1)
mail, rmail: send mail to users or read mail . mail(1)
file for transmission via mail /encode/decode a binary uuencode(1)
processing system mailx: interactive message . mailx(1)
main: Enter a C main program. main(3C)
malloc, free, realloc, calloc: main memory allocator ...... malloc(3C)
mallopt, mallinfo: fast main memory allocator /calloc, malloc(3X)
main: Enter a C main program. .............. main(3C)
mem: main system memory ......... mem(7)
regenerate groups of/ make: maintain, update, and ...... make(1)
ar: archive and library maintainer for portable/ ... ar(1)
intro: introduction to system maintenance commands and/ .. intro(1M)
intro: introduction to system maintenance procedures ..... intro(8)
Licensed material--property of copyright holder(s) Page 46
index(0) DG/UX 4.30 index(0)
SCCS file delta: make a delta (change) to an delta(1)
mounting via NFS. exportfs: Make a directory available for exportfs(2)
mkdir: make a directory ........... mkdir(1)
or ordinary file. mknod: Make a directory, or a special mknod(2)
mkfifo: Make a FIFO special file. .. mkfifo(3)
mkstemp: make a unique file name .... mkstemp(3C)
mktemp: make a unique file name .... mktemp(3C)
Facility database helpadm: make changes to the Help ... helpadm(1M)
logger: make entries in the system log logger(1)
regenerate groups of programs make: maintain, update, and make(1)
banner: make posters ............... banner(1)
session script: make typescript of a terminal script(1G)
key makekey: generate encryption makekey(1)
/realloc, calloc, mallopt, mallinfo: fast main memory/ malloc(3X)
main memory allocator malloc, free, realloc, calloc: malloc(3C)
mallopt, mallinfo: fast main/ malloc, free, realloc, calloc, malloc(3X)
malloc, free, realloc, calloc, mallopt, mallinfo: fast main/ malloc(3X)
entries in this manual man: macros for formatting . man(5)
reference manuals man: print entries from the man(1)
/tfind, tdelete, twalk: manage binary search trees . tsearch(3)
hsearch, hcreate, hdestroy: manage hash search tables .. hsearch(3)
endpoint t_optmgmt: manage options for a transport t_optmgmt(3N)
memcntl: memory management control ......... memcntl(2)
plm: pseudo lock manager device interface ... plm(7)
hfm: high sierra file manager .................... hfm(4)
shl: shell layer manager in DG/UX ........... shl(1)
diskman: menu interface for managing physical and logical/ diskman(1M)
records fwtmp, wtmpfix: manipulate connect accounting fwtmp(1M)
of/ ldlread, ldlinit, ldlitem: manipulate line number entries ldlread(3X)
frexp, ldexp, modf: manipulate parts of/ ....... frexp(3C)
/sigdelset, sigismember: Manipulate signal sets. .... sigsetops(3)
mt: magnetic tape manipulating program ....... mt(1)
locate source, binary, and or manual for program whereis: whereis(1)
for formatting entries in this manual man: macros ........ man(5)
entries from the reference manuals man: print ........ man(1)
ascii: map of ASCII character set . ascii(5)
terminal modes modemap: mapping of AT&T and Berkeley modemap(7)
/ether_line: Ethernet address mapping operations ......... ethers(3N)
diffmk: mark differences between files diffmk(1)
umask: set file-creation mode mask ....................... umask(1)
Set and get file creation mask. umask: .............. umask(2)
an error message file by massaging C source /create mkstr(1)
master files/ master: master file directory and .. master(4)
/master file directory and master files containing device/ master(4)
and master files containing/ master: master file directory master(4)
pty, pts, ptc: pseudo-terminal master/slave pseudo-device/ pty(7)
regular expression compile and match routines regexp: .... regexp(5)
math: math functions and constants math(5)
constants math: math functions and ... math(5)
for troff eqn: format mathematical equations in text eqn(1)
neqn: format mathematical tables for nroff neqn(1)
function matherr: error-handling .... matherr(3M)
Licensed material--property of copyright holder(s) Page 47
index(0) DG/UX 4.30 index(0)
consumption vlimit: control maximum system resource .... vlimit(3C)
mbstowcs, wcstombs: multibyte/ mblen, mbtowc, wctomb, ..... multibyte(3C)
mblen, mbtowc, wctomb, mbstowcs, wcstombs: multibyte/ multibyte(3C)
wcstombs: multibyte/ mblen, mbtowc, wctomb, mbstowcs, .. multibyte(3C)
as: MC88000 assembler .......... as(1)
sifilter: preprocess MC88100 assembly language .. sifilter(1)
/pow, gcd, invert, rpow, msqrt, mcmp, move, min, omin, fmin,/ mp(3X)
msqrt,/ madd, msub, mult, mdiv, pow, gcd, invert, rpow, mp(3X)
mem: main system memory .... mem(7)
/Read the archive header of a member of an archive file .. ldahread(3X)
groups: show group memberships ................ groups(1)
memcpy, memmove, memset:/ memccpy, memchr, memcmp, ... memory(3C)
memmove, memset:/ memccpy, memchr, memcmp, memcpy, .... memory(3C)
memset:/ memccpy, memchr, memcmp, memcpy, memmove, ... memory(3C)
control memcntl: memory management . memcntl(2)
memccpy, memchr, memcmp, memcpy, memmove, memset:/ .. memory(3C)
space allocation. memctl: Change data segment memctl(2)
/memchr, memcmp, memcpy, memmove, memset: memory/ ... memory(3C)
valloc: aligned memory allocator in DG/UX .. valloc(3)
free, realloc, calloc: main memory allocator malloc, .. malloc(3C)
mallopt, mallinfo: fast main memory allocator /calloc, . malloc(3X)
bcmp: compare two areas of memory ..................... bcmp(3C)
bzero: Zero a portion of memory. .................... bzero(3C)
shmctl: Shared memory control operations. . shmctl(2)
Spawn new process in a virtual memory efficient way. vfork: vfork(2)
mfs: memory file system ......... mfs(4)
message, semaphore, or shared memory id ipcrm: remove ... ipcrm(1)
kmem: kernel logical memory ..................... kmem(7)
memcntl: memory management control .. memcntl(2)
mem: main system memory ..................... mem(7)
lock (or unlock) pages in memory mlock, munlock: .... mlock(3C)
shmsys: Perform a shared memory operation. .......... shmsys(2)
memcpy, memmove, memset: memory operations /memcmp, memory(3C)
Lock data, text, or both into memory. plock: ............ plock(2)
sync: Synchronize disk and memory resident file system/ sync(2)
shmat: attach a shared memory segment ............. shmat(2)
shmdt: Detach a shared memory segment. ............ shmdt(2)
shmget: Get shared memory segment. ............ shmget(2)
string to an allocated area of memory. strdup: Copy a .... strdup(3C)
/memcmp, memcpy, memmove, memset: memory operations .. memory(3C)
physical and logical/ diskman: menu interface for managing diskman(1M)
administration/ sysadm: menu-driven system ......... sysadm(1M)
sort: sort and/or merge files ................ sort(1)
paste: merge lines ................ paste(1)
merge: three-way file merge ...................... merge(1)
files acctmerg: merge or add total accounting acctmerg(1M)
rcsmerge: merge RCS revisions ........ rcsmerge(1)
merge: three-way file merge merge(1)
mesg: permit or deny messages mesg(1)
putmsg: Pass a message down a stream. ..... putmsg(2)
source mkstr: create an error message file by massaging C mkstr(1)
recv: Receive a message from a socket. ..... recv(2)
Licensed material--property of copyright holder(s) Page 48
index(0) DG/UX 4.30 index(0)
recvfrom: Receive a message from a socket. ..... recvfrom(2)
recvmsg: Receive a message from a socket. ..... recvmsg(2)
send: Send a message from a socket. ..... send(2)
sendmsg: Send a message from a socket. ..... sendmsg(2)
sendto: Send a message from a socket. ..... sendto(2)
getmsg: Get a message from a stream. ..... getmsg(2)
msgrcv: Receive a message. ................... msgrcv(2)
msgsnd: Send a message. ................... msgsnd(2)
mailx: interactive message processing system .. mailx(1)
destroy a/ msgctl: Get or set message queue attributes or msgctl(2)
msgget: Get message queue identifier. .. msgget(2)
queue attributes or destroy a message queue. /or set message msgctl(2)
msgsys: Perform a message queue operation. ... msgsys(2)
memory id ipcrm: remove message, semaphore, or shared ipcrm(1)
t_error: produce error message .................... t_error(3N)
/Print an error message to standard error. . extended_perror(3C)
about RCS/ rlog: print log messages and other information rlog(1)
mesg: permit or deny messages ................... mesg(1)
sys_nerr: system error messages /errno, sys_errlist, perror(3C)
strace: print STREAMS trace messages ................... strace(1M)
syslogd: log systems messages ................... syslogd(8)
mfs: memory file system .... mfs(4)
/mcmp, move, min, omin, fmin, m_in, mout, omout, fmout,/ . mp(3X)
/rpow, msqrt, mcmp, move, min, omin, fmin, m_in, mout,/ mp(3X)
driver clone: open any minor device on a STREAMS .. clone(7)
/overview of accounting and miscellaneous accounting/ .. acct(1M)
intro: introduction to miscellany ................. intro(5)
file. mkdir: Create a directory .. mkdir(2)
mkdir: make a directory .... mkdir(1)
file. mkfifo: Make a FIFO special mkfifo(3)
system mkfs, newfs: create a file . mkfs(1M)
mknod: build special file .. mknod(1M)
special or ordinary file. mknod: Make a directory, or a mknod(2)
name mkstemp: make a unique file mkstemp(3C)
file by massaging C source mkstr: create an error message mkstr(1)
name mktemp: make a unique file . mktemp(3C)
/cftime, ascftime, difftime, mktime, strftime, tzset: date/ ctime(3C)
unlock) pages in memory mlock, munlock: lock (or ... mlock(3C)
unlock address space mlockall, munlockall: lock or mlockall(3C)
formatting documents mm: the MM macro package for ....... mm(5)
documents formatted with mm macros, eqn or tbl /checks checkmm(1)
documents formatted with the MM macros mm: print ....... mm(1)
with the MM macros mm: print documents formatted mm(1)
formatting documents mm: the MM macro package for mm(5)
mmt: typeset documents ..... mmt(1)
table in DG/UX mnttab: mounted file system mnttab(4)
umask: set file-creation mode mask .................. umask(1)
chmod: change the mode of a file ............. chmod(1)
chmod: Change mode of file. .............. chmod(2)
fchmod: Change mode of file. .............. fchmod(2)
Berkeley terminal modes modemap: mapping of AT&T and modemap(7)
of AT&T and Berkeley terminal modes modemap: mapping .... modemap(7)
Licensed material--property of copyright holder(s) Page 49
index(0) DG/UX 4.30 index(0)
getty: set terminal type, modes, speed, and line/ .... getty(1M)
uugetty: set terminal type, modes, speed, and line/ .... uugetty(1M)
floating-point/ frexp, ldexp, modf: manipulate parts of .. frexp(3C)
touch: update access and modification times of a file touch(1)
utime: Set file access and modification times. ........ utime(2)
utimes: set file access and modification times ......... utimes(2)
/ckpacct, dodisk, lastlogin, monacct, nulladm, prctmp,/ . acctsh(1M)
profile monitor: prepare execution . monitor(3C)
filter for CRT viewing more, page: file perusal ... more(1)
dg_mount: Mount a file system. ....... dg_mount(2)
mount: Mount a file system. ....... mount(2)
mount, umount: mount and dismount filesystems mount(1M)
mount: Mount a file system. mount(2)
setmnt: establish mount table ................ setmnt(1M)
dismount filesystems mount, umount: mount and ... mount(1M)
Get information about a mounted file system. fstatfs: fstatfs(2)
Get information about a mounted file system. statfs: statfs(2)
DG/UX mnttab: mounted file system table in mnttab(4)
/update the super-blocks of mounted file systems ....... update(1M)
Make a directory available for mounting via NFS. exportfs: exportfs(2)
/move, min, omin, fmin, m_in, mout, omout, fmout, m_out,/ mp(3X)
/m_in, mout, omout, fmout, m_out, sdiv, itom: multiple/ mp(3X)
mvdir: move a directory ........... mvdir(1M)
cp, ln, mv: copy, link or move files ................. cp(1)
/invert, rpow, msqrt, mcmp, move, min, omin, fmin, m_in,/ mp(3X)
the LP request scheduler and move requests /start/stop . lpsched(1M)
formatting a permuted index mptx: the macro package for mptx(5)
/erand48, lrand48, nrand48, mrand48, jrand48, srand48,/ drand48(3)
ms: text formatting macros . ms(5)
queue attributes or destroy a/ msgctl: Get or set message . msgctl(2)
identifier. msgget: Get message queue .. msgget(2)
msgrcv: Receive a message. . msgrcv(2)
msgsnd: Send a message. .... msgsnd(2)
queue operation. msgsys: Perform a message .. msgsys(2)
/mdiv, pow, gcd, invert, rpow, msqrt, mcmp, move, min, omin,/ mp(3X)
invert, rpow, msqrt,/ madd, msub, mult, mdiv, pow, gcd, mp(3X)
program mt: magnetic tape manipulating mt(1)
rpow, msqrt,/ madd, msub, mult, mdiv, pow, gcd, invert, mp(3X)
wctomb, mbstowcs, wcstombs: multibyte operations /mbtowc, multibyte(3C)
/pseudo WORM (Write Once Read Multiple optical device) as/ wmt(7)
/fmout, m_out, sdiv, itom: multiple precision integer/ mp(3X)
pages in memory mlock, munlock: lock (or unlock) .. mlock(3C)
address space mlockall, munlockall: lock or unlock . mlockall(3C)
typesetting viewgraphs and/ mv: a troff macro package for mv(5)
cp, ln, mv: copy, link or move files cp(1)
mvdir: move a directory .... mvdir(1M)
slides mvt: typeset view graphs and mvt(1)
current/ cuserid: get the user name associated with the ... cuserid(3S)
devnm: device name ....................... devnm(1M)
tmpnam, tempnam: create a name for a temporary file .. tmpnam(3S)
ldgetname: retrieve symbol name for object file symbol/ ldgetname(3X)
getpw: get name from UID .............. getpw(3)
Licensed material--property of copyright holder(s) Page 50
index(0) DG/UX 4.30 index(0)
return value for environment name getenv: .............. getenv(3C)
getlogin: get login name ....................... getlogin(3C)
getsockname: Get socket name. ...................... getsockname(2)
nlist: get entries from name list .................. nlist(3)
file nm: print name list of common object . nm(1)
logname: get login name ....................... logname(1)
mkstemp: make a unique file name ....................... mkstemp(3C)
mktemp: make a unique file name ....................... mktemp(3C)
rename: Change the name of a file. ............ rename(2)
ttyname, isatty: find name of a terminal ......... ttyname(3C)
getpeername: Get name of connected peer. .... getpeername(2)
uname: print name of current DG/UX system uname(1)
getdomainname: Get name of current domain. .... getdomainname(2)
setdomainname: Set name of current domain. .... setdomainname(2)
gethostname: Get name of current host. ...... gethostname(2)
sethostname: Set name of current host. ...... sethostname(2)
uname: Get name of current UNIX system. uname(2)
tty: get the name of the terminal ....... tty(1)
/get character login name of the user ........... sysv3_cuserid(3S)
logname: return login name of user ............... logname(3X)
pwd: print working directory name ....................... pwd(1)
returns the real file name. realpath: ........... realpath(3)
bind: Bind a name to a socket. .......... bind(2)
deliver portions of path names basename, dirname: .. basename(1)
term: conventional names for terminals ........ term(5)
ncheck: generate names from i-numbers ....... ncheck(1M)
print user and group IDs and names id: ................. id(1)
test for floating-point NaN (Not-a-Number) /isnanf: isnan(3C)
systems processed by fsck and ncheck /list of file ...... checklist(4)
i-numbers ncheck: generate names from ncheck(1M)
index ndx: create a subject-page . ndx(1)
definitions for eqn and neqn /equation character .. eqnchar(5)
tables for nroff neqn: format mathematical .. neqn(1)
/get_myaddress, getnetname, netname2host, netname2user,/ rpc(3N)
/getnetname, netname2host, netname2user, pmap_getmaps,/ rpc(3N)
values between host and network byte order /convert byteorder(3N)
setnetent, endnetent: get network entry /getnetbyname, getnetent(3N)
/endnetgrent, innetgr: get network group entry ........ getnetgrent(3N)
/sethostent, endhostent: get network host entry ......... gethostent(3N)
intro: introduction to network library functions .. intro(3N)
group or/ bcs_cat: type hosts, networks, passwd, protocols, bcs_cat(1M)
existing one. creat: Create a new file or rewrite an ..... creat(2)
newgrp: log in to a new group .................. newgrp(1)
link: Create a new link to a file. ........ link(2)
fork: Create a new process. ............... fork(2)
memory efficient/ vfork: Spawn new process in a virtual ... vfork(2)
a text file newform: change the format of newform(1)
mkfs, newfs: create a file system mkfs(1M)
newgrp: log in to a new group newgrp(1)
news: print news items ................. news(1)
news: print news items ..... news(1)
/store, delete, firstkey, nextkey: data base subroutines dbm(3X)
Licensed material--property of copyright holder(s) Page 51
index(0) DG/UX 4.30 index(0)
/Starts a BIOD server for NFS client requests. ....... async_daemon(2)
identified/ nfssvc: Start an NFS daemon on the socket ... nfssvc(2)
available for mounting via NFS. /Make a directory .... exportfs(2)
the socket identified by/ nfssvc: Start an NFS daemon on nfssvc(2)
process. nice: Change priority of a . nice(2)
higher or lower priority nice: run a command at a ... nice(1)
nl: line numbering filter .. nl(1)
list nlist: get entries from name nlist(3)
object file nm: print name list of common nm(1)
dg_mknod: Create a file system node. ...................... dg_mknod(2)
inode: file node structure ............. inode(4)
hangups and quits nohup: run a command immune to nohup(1)
from an/ strip: strip non-executable information . strip(1)
setjmp, longjmp: non-local goto ............. setjmp(3C)
sigsetjmp, siglongjmp: Non-local jumps. ........... sigsetjmp(3)
distinguish between prime and non-prime days /used to ... holidays(4)
and terminate the process normally. exit: Flush buffers exit(3C)
test for floating-point NaN (Not-a-Number) /isnanf: ... isnan(3C)
drand48, erand48, lrand48, nrand48, mrand48, jrand48,/ drand48(3)
nroff: format text ......... nroff(1)
format mathematical tables for nroff neqn: ............... neqn(1)
terminal driving tables for nroff nterm: .............. nterm(5)
tbl: format tables for nroff or troff ............. tbl(1)
constructs deroff: remove nroff/troff, tbl, and eqn .. deroff(1)
for nroff nterm: terminal driving tables nterm(5)
between host/ htonl, htons, ntohl, ntohs: convert values byteorder(3N)
host and/ htonl, htons, ntohl, ntohs: convert values between byteorder(3N)
null: the null file .................. null(7)
null: the null file ........ null(7)
/dodisk, lastlogin, monacct, nulladm, prctmp, prdaily,/ . acctsh(1M)
/ldlitem: manipulate line number entries of a common/ ldlread(3X)
a/ /ldnlseek: seek to line number entries of a section of ldlseek(3X)
factor: factor a number ..................... factor(1)
/setstate: better random number generator; routines for/ random(3)
getrpcport: get RPC port number ..................... getrpcport(3R)
inodes df: report number of free disk blocks and df(1M)
getdtablesize: Return the number of open files the/ .. getdtablesize(2)
string to double-precision number strtod, atof: convert strtod(3C)
gcvt: convert floating-point number to string ecvt, fcvt, ecvt(3)
nl: line numbering filter ........... nl(1)
parts of floating-point numbers /modf: manipulate . frexp(3C)
random inode generation numbers fsirand: install .. fsirand(1M)
to system calls and error numbers intro: introduction intro(2)
processing language oawk: old pattern scanning and oawk(1)
dump parts of an object or object archive file att_dump: att_dump(1)
descriptor. close: Close an object associated with a file close(2)
dis: object code disassembler ... dis(1)
cprs: compress a common object file ................ cprs(1)
ldopen, ldaopen: open an object file for reading .... ldopen(3X)
number entries of a common object file function /line ldlread(3X)
ldclose, ldaclose: close an object file ................ ldclose(3X)
read the file header of an object file ldfhread: ..... ldfhread(3X)
Licensed material--property of copyright holder(s) Page 52
index(0) DG/UX 4.30 index(0)
of a section of a common object file /number entries ldlseek(3X)
the optional file header of an object file ldohseek: seek to ldohseek(3X)
of a section of a common object file /entries ...... ldrseek(3X)
section header of a common object file /an indexed/named ldshread(3X)
section of a common object file /an indexed/named ldsseek(3X)
of symbol table entry of an object file /compute index ldtbindex(3X)
symbol table entry of an object file /read an indexed ldtbread(3X)
seek to the symbol table of an object file ldtbseek: ..... ldtbseek(3X)
nm: print name list of common object file ................ nm(1)
information for a common object file reloc: relocation reloc(4)
/retrieve symbol name for object file symbol table entry ldgetname(3X)
format syms: common object file symbol table ... syms(4)
file header for common object files filehdr: ..... filehdr(4)
ld: link editor for common object files ............... ld(1)
print section sizes of common object files size: ........ size(1)
find ordering relation for an object library lorder: .... lorder(1)
att_dump: dump parts of an object or object archive file att_dump(1)
/the printable strings in an object or other binary file strings(1)
position. lseek: Change object pointer's current ... lseek(2)
read: Read from an object. .................... read(2)
write: Write to an object. .................... write(2)
index: Search for the first occurrence of a character in a/ index(3C)
rindex: Search for the last occurrence of a character in a/ rindex(3C)
od: octal dump ................. od(1)
od: octal dump ............. od(1)
processing language oawk: old pattern scanning and ... oawk(1)
/rpow, msqrt, mcmp, move, min, omin, fmin, m_in, mout, omout,/ mp(3X)
/min, omin, fmin, m_in, mout, omout, fmout, m_out, sdiv,/ mp(3X)
wmt: pseudo WORM (Write Once Read Multiple optical/ wmt(7)
/an open file descriptor onto a specific descriptor. dup2(2)
fopen, freopen, fdopen: open a stream .............. fopen(3S)
reading ldopen, ldaopen: open an object file for .... ldopen(3X)
STREAMS driver clone: open any minor device on a . clone(7)
dup: Duplicate an open file descriptor. ...... dup(2)
specific/ dup2: Duplicate an open file descriptor onto a dup2(2)
remove an advisory lock on an open file in DG/UX /apply or dg_flock(3C)
can/ /Return the number of open files the current process getdtablesize(2)
open: open for reading or writing open(2)
writing open: open for reading or .. open(2)
certain conditions exist on open streams. /Check whether poll(2)
seekdir,/ directory: opendir, readdir, telldir, . directory(3X)
control system log syslog, openlog, closelog, setlogmask: syslog(3)
pseudo-device syscon: DG/UX operating system console ... syscon(7)
prf: DG/UX operating system profiler .. prf(7)
/prfdc, prfsnap, prfpr: DG/UX operating system profiler .. profiler(1M)
Perform a message queue operation. msgsys: ........ msgsys(2)
tputs: terminal independent operation routines /tgoto, termcap(3X)
semsys: Perform a semaphore operation. ................. semsys(2)
Perform a shared memory operation. shmsys: ........ shmsys(2)
rewinddir, closedir: directory operations /telldir, seekdir, directory(3X)
Ethernet address mapping operations /ether_line: ... ethers(3N)
memmove, memset: memory operations /memcmp, memcpy, memory(3C)
Licensed material--property of copyright holder(s) Page 53
index(0) DG/UX 4.30 index(0)
mbstowcs, wcstombs: multibyte operations /mbtowc, wctomb, multibyte(3C)
semctl: Semaphore control operations. ................ semctl(2)
semop: Semaphore operations. ................ semop(2)
shmctl: Shared memory control operations. ................ shmctl(2)
strstr, strtok: string operations /strspn, strcspn, string(3C)
join: relational database operator ................... join(1)
/WORM (Write Once Read Multiple optical device) as magnetic/ wmt(7)
terminal screen handling and optimization package curses: curses(3X)
vector getopt: get option letter from argument getopt(3)
object/ ldohseek: seek to the optional file header of an . ldohseek(3X)
berk_stty: set terminal options .................... berk_stty(1)
fcntl: file control options .................... fcntl(5)
att_stty: set the options for a terminal ..... att_stty(1)
stty: set the options for a terminal ..... stty(1)
endpoint t_optmgmt: manage options for a transport .... t_optmgmt(3N)
getopt: parse command options .................... getopt(1)
getoptcvt: parse command options getopts, .......... getopts(1)
getsockopt: Get options on a socket. ....... getsockopt(2)
setsockopt: Set options on sockets. ........ setsockopt(2)
mlock, munlock: lock (or unlock) pages in memory mlock(3C)
between host and network byte order /ntohs: convert values byteorder(3N)
line of file rev: reverse order of characters in each rev(1)
object library lorder: find ordering relation for an ... lorder(1)
/acknowledge receipt of an orderly release indication . t_rcvrel(3N)
t_sndrel: initiate an orderly release ............ t_sndrel(3N)
a directory, or a special or ordinary file. mknod: Make mknod(2)
filesystem: file system organization ............... filesystem(7)
connection dial: establish an out-going terminal line .... dial(3C)
assembler and link editor output a.out: common ...... a.out(4)
information to standard output /group or services . bcs_cat(1M)
and type files to standard output cat: concatenate ... cat(1)
long lines for finite width output device fold: fold .. fold(1)
troff: description of output language ............ troff(5)
/vsprintf: print formatted output of a varargs argument/ vprintf(3S)
sprintf: print formatted output printf, fprintf, ... printf(3S)
sysdef: output system definition ... sysdef(1M)
data or expedited data sent over a connection /receive t_rcv(3N)
send data or expedited data over a connection t_snd: .. t_snd(3N)
/acctdusg, accton, acctwtmp: overview of accounting and/ acct(1M)
chown, chgrp: change owner or group ............. chown(1)
and expand files pack, pcat, unpack: compress pack(1)
handling and optimization package /terminal screen .. curses(3X)
permuted/ mptx: the macro package for formatting a ... mptx(5)
documents mm: the MM macro package for formatting ..... mm(5)
viewgraphs/ mv: a troff macro package for typesetting .... mv(5)
sadc: system activity report package sa1, sa2, ......... sar(1M)
standard buffered input/output package stdio: ............ stdio(3S)
interprocess communication package ftok: standard .... stdipc(3C)
CRT viewing more, page: file perusal filter for more(1)
getpagesize: Get the system page size. ................. getpagesize(2)
/ypprot_err: Yellow Pages client interface ..... ypclnt(3N)
munlock: lock (or unlock) pages in memory mlock, .... mlock(3C)
Licensed material--property of copyright holder(s) Page 54
index(0) DG/UX 4.30 index(0)
DG/UX System device for paging /specify additional swapon(1M)
a swap device for interleaved paging/swapping. swapon: Add swapon(2)
/Swap the bytes within each pair of bytes in a string. . swab(3C)
socketpair: Create a pair of connected sockets. . socketpair(2)
master/slave pseudo-device pair /ptc: pseudo-terminal pty(7)
set label and data translation parameters tkey: .......... tkey(1)
getppid: Get parent process-id. ......... getppid(2)
getopt: parse command options ...... getopt(1)
getopts, getoptcvt: parse command options ...... getopts(1)
tail: deliver the last part of a file ............. tail(1)
shutdown: Shut down part of a full-duplex/ ..... shutdown(2)
archive file att_dump: dump parts of an object or object att_dump(1)
frexp, ldexp, modf: manipulate parts of floating-point/ ... frexp(3C)
putmsg: Pass a message down a stream. putmsg(2)
passwd: change login password passwd(1)
passwd: password file ...... passwd(4)
bcs_cat: type hosts, networks, passwd, protocols, group or/ bcs_cat(1M)
functions crypt: password and file encryption crypt(3X)
devices requiring a dial-up password. dialups: ........ dialups(4)
setpwfile, fgetpwent: get password file entry /endpwent, getpwent(3)
putpwent: write password file entry in DG/UX putpwent(3)
passwd: password file .............. passwd(4)
vipw: edit the DG/UX System password file .............. vipw(1M)
getpass: read a password ................... getpass(3)
passwd: change login password ................... passwd(1)
pwck, grpck: password/group file checkers pwck(1M)
d_passwd: log-in programs and passwords for dial-up devices d_passwd(4)
paste: merge lines ......... paste(1)
dirname: deliver portions of path names basename, ...... basename(1)
configurable pathname/ pathconf, fpathconf: Get ... pathconf(2)
get current working directory pathname getwd: ........... getwd(3)
directory getcwd: get pathname of current working getcwd(3C)
fpathconf: Get configurable pathname variables. pathconf, pathconf(2)
fgrep: search a file for a pattern grep, egrep, ...... grep(1)
processing language awk: pattern scanning and ....... awk(1)
processing language oawk: old pattern scanning and ....... oawk(1)
signal is caught. pause: Suspend process until a pause(2)
expand files pack, pcat, unpack: compress and . pack(1)
a process popen, pclose: initiate pipe to/from popen(3S)
dghost, m68k, m88k, i386, pdp11, u3b, u3b5, vax: provide/ machid(1)
Get name of connected peer. getpeername: ........ getpeername(2)
sigpending: Examine pending signals. ........... sigpending(2)
operation. msgsys: Perform a message queue .... msgsys(2)
semsys: Perform a semaphore operation. semsys(2)
operation. shmsys: Perform a shared memory .... shmsys(2)
functions. dg_devctl: Perform device-control ..... dg_devctl(2)
start the lock reclaim grace period. /lock database and dg_lock_reset(2)
super-blocks of/ update: periodically update the .... update(1M)
check the uucp directories and permissions file uucheck: . uucheck(1M)
mesg: permit or deny messages .... mesg(1)
macro package for formatting a permuted index mptx: the .. mptx(5)
ptx: permuted index ............. ptx(1)
Licensed material--property of copyright holder(s) Page 55
index(0) DG/UX 4.30 index(0)
format acct: per-process accounting file acct(4)
acctcms: command summary from per-process accounting records acctcms(1M)
sys_nerr: system error/ perror, errno, sys_errlist, perror(3C)
terminals in DG/UX pg: file perusal filter for CRT ..... pg(1)
more, page: file perusal filter for CRT viewing more(1)
CRT terminals in DG/UX pg: file perusal filter for pg(1)
/menu interface for managing physical and logical disks . diskman(1M)
graphs grap: pic preprocessor for drawing grap(1)
drawing simple pictures pic: troff preprocessor for pic(1)
for drawing simple pictures /troff preprocessor pic(1)
split: split a file into pieces ..................... split(1)
channel. pipe: Create an interprocess pipe(2)
tee: pipe fitting ............... tee(1)
popen, pclose: initiate pipe to/from a process ..... popen(3S)
host in DG/UX unix_ipc: piping communications within a unix_ipc(6F)
device interface plm: pseudo lock manager ... plm(7)
both into memory. plock: Lock data, text, or . plock(2)
/netname2host, netname2user, pmap_getmaps, pmap_getport,/ rpc(3N)
/netname2user, pmap_getmaps, pmap_getport, pmap_rmtcall,/ rpc(3N)
/pmap_getmaps, pmap_getport, pmap_rmtcall, pmap_set,/ ... rpc(3N)
/pmap_getport, pmap_rmtcall, pmap_set, pmap_unset,/ ..... rpc(3N)
/pmap_rmtcall, pmap_set, pmap_unset, registerrpc,/ .. rpc(3N)
limits for a control point directory /allocation cpd(1)
resource limits of a control point directory. /Change the dg_set_cpd_limits(2)
ftell: reposition a file pointer in a stream /fsetpos, fseek(3S)
lseek: Change object pointer's current position. lseek(2)
conditions exist on open/ poll: Check whether certain poll(2)
to/from a process popen, pclose: initiate pipe popen(3S)
getrpcport: get RPC port number ................ getrpcport(3R)
and library maintainer for portable archives ar: archive ar(1)
bzero: Zero a portion of memory. ......... bzero(3C)
basename, dirname: deliver portions of path names ..... basename(1)
object pointer's current position. lseek: Change ... lseek(2)
in an/ ffs: Return the position of the first set bit ffs(3C)
file tposn: position tape to specified . tposn(1)
banner: make posters .................... banner(1)
laser printer di10: Postprocessor for the IMAGEN di10(1)
mcmp,/ madd, msub, mult, mdiv, pow, gcd, invert, rpow, msqrt, mp(3X)
logarithm,/ exp, log, log10, pow, sqrt: exponential, .... exp(3M)
/sqrt: exponential, logarithm, power, square root functions exp(3M)
pr: print files ............ pr(1)
/lastlogin, monacct, nulladm, prctmp, prdaily, prtacct,/ . acctsh(1M)
/monacct, nulladm, prctmp, prdaily, prtacct, shutacct,/ acctsh(1M)
/m_out, sdiv, itom: multiple precision integer arithmetic mp(3X)
monitor: prepare execution profile .. monitor(3C)
language sifilter: preprocess MC88100 assembly sifilter(1)
cpp: the C language preprocessor ............... cpp(1)
graphs grap: pic preprocessor for drawing ... grap(1)
simple pictures pic: troff preprocessor for drawing ... pic(1)
/Specify what to do upon presentation of a signal. .. signal(2)
/Specify what to do upon presentation of a signal. .. sigset(2)
/Specify what to do upon presentation of a signal. .. sigvec(2)
Licensed material--property of copyright holder(s) Page 56
index(0) DG/UX 4.30 index(0)
unget: undo a previous get of an SCCS file unget(1)
dg_lock_wait: Wait for previously delayed lock/ ... dg_lock_wait(2)
profiler prf: DG/UX operating system prf(7)
operating/ prfld, prfstat, prfdc, prfsnap, prfpr: DG/UX profiler(1M)
prfsnap, prfpr: DG/UX/ prfld, prfstat, prfdc, ..... profiler(1M)
/prfstat, prfdc, prfsnap, prfpr: DG/UX operating system/ profiler(1M)
prfld, prfstat, prfdc, prfsnap, prfpr: DG/UX/ ..... profiler(1M)
prfpr: DG/UX operating/ prfld, prfstat, prfdc, prfsnap, ... profiler(1M)
/used to distinguish between prime and non-prime days ... holidays(4)
types: primitive system data types types(5)
standard/ extended_perror: Print an error message to .. extended_perror(3C)
prs: print an SCCS file ......... prs(1)
date: print and set the date ..... date(1)
cal: print calendar ............. cal(1)
of a file sum: print checksum and block count sum(1)
software/ sde-target: Print commands to reset .... sde-target(1)
editing activity sact: print current SCCS file .... sact(1)
the MM macros mm: print documents formatted with mm(1)
reference manuals man: print entries from the ..... man(1)
pr: print files ................ pr(1)
vprintf, vfprintf, vsprintf: print formatted output of a/ vprintf(3S)
printf, fprintf, sprintf: print formatted output ..... printf(3S)
information about RCS/ rlog: print log messages and other rlog(1)
information lpstat: print LP lineprinter status lpstat(1)
object file nm: print name list of common .. nm(1)
system uname: print name of current DG/UX uname(1)
news: print news items ........... news(1)
infocmp: compare or print out terminfo/ ........ infocmp(1M)
printenv: print out the environment .. printenv(1)
file(s) acctcom: search and print process accounting ... acctcom(1)
printer spooler lpr: Send print requests to a line ... lpr(1)
object files size: print section sizes of common size(1)
strace: print STREAMS trace messages strace(1M)
names id: print user and group IDs and id(1)
pwd: print working directory name pwd(1)
or other/ strings: find the printable strings in an object strings(1)
data base printcap: printer capability printcap(5)
environment printenv: print out the .... printenv(1)
printcap: printer capability data base printcap(5)
terminfo: terminal and printer capability database terminfo(4)
lpc: line printer control program .... lpc(8)
lpd: line printer daemon ............. lpd(8)
for the IMAGEN laser printer di10: Postprocessor di10(1)
requests to an LP line printer /cancel: send/cancel lp(1)
lp: DGC AViiON family line printer special files ...... lp(7)
Send print requests to a line printer spooler lpr: ...... lpr(1)
remove jobs from the line printer spooling queue lprm: lprm(1)
disable: enable/disable LP printers enable, .......... enable(1)
print formatted output printf, fprintf, sprintf: .. printf(3S)
Get process scheduling priority. getpriority: .... getpriority(2)
a command at a higher or lower priority nice: run ........ nice(1)
nice: Change priority of a process. ..... nice(2)
Licensed material--property of copyright holder(s) Page 57
index(0) DG/UX 4.30 index(0)
renice: alter priority of running processes renice(1)
Set process scheduling priority. setpriority: .... setpriority(2)
/library routines for remote procedure calls ............ rpc(3N)
/startup, turnacct: shell procedures for accounting .. acctsh(1M)
to system maintenance procedures /introduction .. intro(8)
on a filehandle. dg_lcntl: Process a record lock request dg_lcntl(2)
acct: Enable or disable process accounting. ........ acct(2)
acctprc1, acctprc2: process accounting ......... acctprc(1M)
acctcom: search and print process accounting file(s) . acctcom(1)
alarm: Set a process alarm clock. ....... alarm(2)
times. times: Get process and child process .. times(2)
of open files the current process can have. /the number getdtablesize(2)
directory of the calling process. /Change the working chdir(2)
root directory of the calling process. chroot: Changes the chroot(2)
init, telinit: process control initialization init(1M)
associated with the current process /get the user name cuserid(3S)
timex: time a command; report process data and system/ ... timex(1)
extended errno for the current process. /function returns the dg_ext_errno(2)
_exit: Terminate a process. ................... _exit(2)
fork: Create a new process. ................... fork(2)
getpgrp2: Get process group. ............. getpgrp2(2)
control. setpgid: Set process group ID for job ... setpgid(2)
getpgrp: Get process group ID. .......... getpgrp(2)
setsid: Create session and set process group ID. .......... setsid(2)
tcgetpgrp: Get foreground process group ID. .......... tcgetpgrp(3)
tcsetpgrp: Set foreground process group ID. .......... tcsetpgrp(3)
Send signal to a process or a process group. killpg: .... killpg(2)
/file usage information for a process identified by a/ ... dg_file_info(2)
efficient/ vfork: Spawn new process in a virtual memory vfork(2)
inittab: script for the init process .................... inittab(4)
for a process identified by a process key /usage information dg_file_info(2)
kill: terminate a process .................... kill(1)
kill: Send a signal to a process. ................... kill(2)
nice: Change priority of a process. ................... nice(2)
buffers and terminate the process normally. exit: Flush exit(3C)
killpg: Send signal to a process or a process group. killpg(2)
initiate pipe to/from a process popen, pclose: .... popen(3S)
time profiling for this process. /Set up execution profil(2)
getpriority: Get process scheduling priority. getpriority(2)
setpriority: Set process scheduling priority. setpriority(2)
contained/ sigret: Restore the process state to that ...... sigret(2)
ps: report process status ............. ps(1)
wait, waitpid: Wait for process termination. ....... wait(2)
times: Get process and child process times. ............. times(2)
wait3: Wait for child process to stop or terminate. wait3(2)
/Wait for the specified child process to stop or terminate. wait4(2)
dg_xtrace: extended process trace .............. dg_xtrace(2)
ptrace: Process trace. ............. ptrace(2)
/signals and suspend the process until a signal is/ . berk_sigpause(2)
caught. pause: Suspend process until a signal is .. pause(2)
blocked signal and suspend the process until a signal is/ /a sigpause(2)
wait: await completion of process .................... wait(1)
Licensed material--property of copyright holder(s) Page 58
index(0) DG/UX 4.30 index(0)
/list of file systems processed by fsck and ncheck checklist(4)
the system's currently active processes. /information about dg_process_info(2)
killall: kill all active processes .................. killall(1M)
alter priority of running processes renice: ......... renice(1)
structure fuser: identify processes using a file or file fuser(1M)
setpgrp: Set process-group-id. .......... setpgrp(2)
setpgrp2: Set process-group-id. .......... setpgrp2(2)
getpid: Get process-id. ................ getpid(2)
getppid: Get parent process-id. ................ getppid(2)
awk: pattern scanning and processing language ........ awk(1)
oawk: old pattern scanning and processing language ........ oawk(1)
mailx: interactive message processing system .......... mailx(1)
series workstation graphics processor grfx: AViiON 300 grfx(7)
halt: stop the DG/UX System processor .................. halt(1M)
m4: macro processor .................. m4(1)
/the current contents of the processor status register. . getpsr(2)
setpsr: Set the processor status register. . setpsr(2)
provide truth value about your processor type /u3b5, vax: machid(1)
Reboot halts the system processor(s). reboot: ..... reboot(2)
/Add a signal to the calling process's set of blocked/ .. sighold(2)
/a signal from the calling process's set of blocked/ .. sigrelse(2)
listing for macro/ macref: produce cross-reference .... macref(1)
t_error: produce error message ...... t_error(3N)
prof: display profile data . prof(1)
function prof: profile within a ..... prof(5)
profiling for this process. profil: Set up execution time profil(2)
prof: display profile data ............... prof(1)
monitor: prepare execution profile .................... monitor(3C)
environment at login time profile: setting up an ..... profile(4)
prof: profile within a function .. prof(5)
prf: DG/UX operating system profiler ................... prf(7)
prfpr: DG/UX operating system profiler /prfdc, prfsnap, . profiler(1M)
profil: Set up execution time profiling for this process. profil(2)
assert: verify program assertion .......... assert(3X)
cb: C program beautifier ......... cb(1)
lint: a C program checker ............ lint(1)
cxref: generate C program cross-reference .... cxref(1)
ctrace: C program debugger ........... ctrace(1)
edata: last locations in program end, etext, ....... end(3C)
execve: Execute a program file. .............. execve(2)
which: locate a program file for csh(1) users which(1)
uucico: file transport program for the uucp system uucico(1M)
lpc: line printer control program .................... lpc(8)
lpq: spool queue examination program .................... lpq(1)
main: Enter a C main program. ................... main(3C)
mt: magnetic tape manipulating program .................... mt(1)
sdiff: side-by-side difference program .................... sdiff(1)
STREAMS error logger cleanup program strclean: ......... strclean(1M)
system administration program sysadm: menu-driven sysadm(1M)
units: conversion program .................... units(1)
for the uucp file transport program /the scheduler .... uusched(1M)
binary, and or manual for program /locate source, ... whereis(1)
Licensed material--property of copyright holder(s) Page 59
index(0) DG/UX 4.30 index(0)
sh, rsh: shell, the command programming language ....... sh(1)
dial-up/ d_passwd: log-in programs and passwords for . d_passwd(4)
tasks lex: generate programs for simple lexical lex(1)
to commands and application programs intro: introduction intro(1)
commands and application programs /system maintenance intro(1M)
and regenerate groups of programs /maintain, update, make(1)
xstr: extract strings from C programs to implement shared/ xstr(1)
/setprotoent, endprotoent: get protocol entry ............. getprotoent(3N)
/type hosts, networks, passwd, protocols, group or services/ bcs_cat(1M)
information t_getinfo: get protocol-specific service .. t_getinfo(3N)
/i386, pdp11, u3b, u3b5, vax: provide truth value about your/ machid(1)
true, false: provide truth values ....... true(1)
prs: print an SCCS file .... prs(1)
/nulladm, prctmp, prdaily, prtacct, shutacct, startup,/ acctsh(1M)
ps: report process status .. ps(1)
interface plm: pseudo lock manager device . plm(7)
Multiple optical device)/ wmt: pseudo WORM (Write Once Read wmt(7)
devtty: control terminal pseudo-device .............. devtty(7)
pseudo-terminal master/slave pseudo-device pair /pts, ptc: pty(7)
DG/UX operating system console pseudo-device syscon: ..... syscon(7)
pseudo-device/ pty, pts, ptc: pseudo-terminal master/slave pty(7)
master/slave/ pty, pts, ptc: pseudo-terminal ....... pty(7)
ptrace: Process trace. ..... ptrace(2)
master/slave/ pty, pts, ptc: pseudo-terminal .. pty(7)
ptx: permuted index ........ ptx(1)
master/slave pseudo-device/ pty, pts, ptc: pseudo-terminal pty(7)
file copy uuto, uupick: public UNIX-to-UNIX system . uuto(1)
stream ungetc: push character back into input ungetc(3S)
puts, fputs: put a string on a stream ... puts(3S)
putc, putchar, fputc, putw: put character or word on a/ putc(3S)
put character or word on a/ putc, putchar, fputc, putw: putc(3S)
character or word on a/ putc, putchar, fputc, putw: put .. putc(3S)
environment putenv: change or add value to putenv(3)
stream. putmsg: Pass a message down a putmsg(2)
entry in DG/UX putpwent: write password file putpwent(3)
stream puts, fputs: put a string on a puts(3S)
getutent, getutid, getutline, pututline, setutent, endutent,/ getut(3)
a/ putc, putchar, fputc, putw: put character or word on putc(3S)
file checkers pwck, grpck: password/group pwck(1M)
name pwd: print working directory pwd(1)
qsort: quicker sort ........ qsort(3C)
tput: query terminfo database .... tput(1)
msgctl: Get or set message queue attributes or destroy a/ msgctl(2)
lpq: spool queue examination program .. lpq(1)
msgget: Get message queue identifier. .......... msgget(2)
Add an element to a circular queue. insque: ............ insque(3C)
from the line printer spooling queue lprm: remove jobs ... lprm(1)
or destroy a message queue. /queue attributes .. msgctl(2)
msgsys: Perform a message queue operation. ........... msgsys(2)
an element from a circular queue. remque: Remove ..... remque(3C)
qsort: quicker sort ............... qsort(3C)
command immune to hangups and quits nohup: run a ........ nohup(1)
Licensed material--property of copyright holder(s) Page 60
index(0) DG/UX 4.30 index(0)
div, ldiv: compute quotient and remainder ..... div(3C)
raise: send a signal ....... raise(3C)
random-number generator rand, srand: simple ........ rand(3C)
numbers fsirand: install random inode generation .... fsirand(1M)
/initstate, setstate: better random number generator;/ .. random(3)
setstate: better random/ random, srandom, initstate, random(3)
rand, srand: simple random-number generator .... rand(3C)
cfsetispeed, cfsetospeed: Baud rate functions. /cfgetospeed, cfsetospeed(3)
fsplit: split f77 or ratfor files ............... fsplit(1)
dialect ratfor: rational FORTRAN ... ratfor(1)
ratfor: rational FORTRAN dialect ... ratfor(1)
routines for returning a rcmd, rresvport, ruserok: .. rcmd(3X)
attributes rcs: change RCS file ....... rcs(1)
rcsintro: introduction to RCS commands ............... rcsintro(1)
rcs: change RCS file attributes ........ rcs(1)
sccstorcs: build RCS file from SCCS file .... sccstorcs(1)
rcsfile: format of RCS file ................... rcsfile(4)
and other information about RCS files /print log messages rlog(1)
ci: check in RCS revisions .............. ci(1)
co: check out RCS revisions .............. co(1)
rcsdiff: compare RCS revisions .............. rcsdiff(1)
rcsmerge: merge RCS revisions .............. rcsmerge(1)
rcsdiff: compare RCS revisions rcsdiff(1)
rcsfile: format of RCS file rcsfile(4)
commands rcsintro: introduction to RCS rcsintro(1)
rcsmerge: merge RCS revisions rcsmerge(1)
interface rdsk: character special disk rdsk(7)
getpass: read a password ............ getpass(3)
entry of an object/ ldtbread: read an indexed symbol table ldtbread(3X)
header/ ldshread, ldnshread: read an indexed/named section ldshread(3X)
tapes dump2label: read and write labels for dump dump2label(1M)
without system/ /Synchronously read data blocks from a file dg_unbuffered_read(2)
tread: read file(s) from tape ..... tread(1)
read: Read from an object. ....... read(2)
readv: Read from file. ............ readv(2)
rmail: send mail to users or read mail mail, ........... mail(1)
wmt: pseudo WORM (Write Once Read Multiple optical device)/ wmt(7)
line: read one line .............. line(1)
read: Read from an object. . read(2)
member of an/ ldahread: Read the archive header of a ldahread(3X)
symbolic link. readlink: Read the contents of a ..... readlink(2)
object file ldfhread: read the file header of an . ldfhread(3X)
executable file/ ldsyshread: read the system header of an ldsyshread(3X)
directory: opendir, readdir, telldir, seekdir,/ directory(3X)
REELexchange: commands for reading and writing IBM and/ reelexchange_intro(1)
open an object file for reading ldopen, ldaopen: .. ldopen(3X)
open: open for reading or writing ......... open(2)
a symbolic link. readlink: Read the contents of readlink(2)
readv: Read from file. ..... readv(2)
setgid: set the real-, effective-, and/ .... setgid(2)
setregid: Set the real-, effective-, and/ .... setregid(2)
setreuid: Set the real-, effective-, and/ .... setreuid(2)
Licensed material--property of copyright holder(s) Page 61
index(0) DG/UX 4.30 index(0)
setuid: Set the real-, effective-, and/ .... setuid(2)
realpath: returns the real file name. ............ realpath(3)
getgid: Get the real-group-id. ............. getgid(2)
allocator malloc, free, realloc, calloc: main memory malloc(3C)
mallinfo: fast/ malloc, free, realloc, calloc, mallopt, .. malloc(3X)
file name. realpath: returns the real . realpath(3)
getuid: Get the real-user-id. .............. getuid(2)
processor(s). reboot: Reboot halts the system .... reboot(2)
system processor(s). reboot: Reboot halts the ... reboot(2)
t_rcvrel: acknowledge receipt of an orderly release/ t_rcvrel(3N)
t_rcvudata: receive a data unit ........ t_rcvudata(3N)
socket. recv: Receive a message from a ... recv(2)
socket. recvfrom: Receive a message from a ... recvfrom(2)
socket. recvmsg: Receive a message from a ... recvmsg(2)
msgrcv: Receive a message. ......... msgrcv(2)
indication t_rcvuderr: receive a unit data error .. t_rcvuderr(3N)
sent over a connection t_rcv: receive data or expedited data t_rcv(3N)
a connect/ t_rcvconnect: receive the confirmation from t_rcvconnect(3N)
database and start the lock reclaim grace period. /lock dg_lock_reset(2)
expression/ berk_regex, regex, re_comp, re_exec: regular .. berk_regex(3)
dg_lcntl: Process a record lock request on a/ .. dg_lcntl(2)
lockf: record locking on files .... lockf(3C)
tdisplay: display label and record translation settings tdisplay(1)
from per-process accounting records /command summary .. acctcms(1M)
manipulate connect accounting records fwtmp, wtmpfix: ... fwtmp(1M)
tape frec: recover files from a backup frec(1M)
socket. recv: Receive a message from a recv(2)
from a socket. recvfrom: Receive a message recvfrom(2)
from a socket. recvmsg: Receive a message . recvmsg(2)
ed, red: text editor ........... ed(1)
reading and writing IBM and/ REELexchange: commands for . reelexchange_intro(1)
berk_regex, regex, re_comp, re_exec: regular expression/ berk_regex(3)
man: print entries from the reference manuals .......... man(1)
execute regular expression regcmp, regex: compile and . regcmp(3X)
compiler regcmp: regular expression . regcmp(1)
make: maintain, update, and regenerate groups of programs make(1)
regular expression regcmp, regex: compile and execute . regcmp(3X)
regular/ berk_regex, regex, re_comp, re_exec: ... berk_regex(3)
compile and match routines regexp: regular expression . regexp(5)
of the processor status register. /current contents getpsr(2)
Set the processor status register. setpsr: ......... setpsr(2)
atexit: register termination routine atexit(3C)
/pmap_set, pmap_unset, registerrpc, svc_destroy,/ . rpc(3N)
match routines regexp: regular expression compile and regexp(5)
regcmp: regular expression compiler regcmp(1)
/regex, re_comp, re_exec: regular expression handler in/ berk_regex(3)
regex: compile and execute regular expression regcmp, regcmp(3X)
requests accept, reject: allow/prevent LP ... accept(1M)
sorted files comm: select or reject lines common to two . comm(1)
lorder: find ordering relation for an object library lorder(1)
join: relational database operator join(1)
/receipt of an orderly release indication ......... t_rcvrel(3N)
Licensed material--property of copyright holder(s) Page 62
index(0) DG/UX 4.30 index(0)
t_sndrel: initiate an orderly release .................... t_sndrel(3N)
for a common object file reloc: relocation information reloc(4)
ldrseek, ldnrseek: seek to relocation entries of a/ ... ldrseek(3X)
common object file reloc: relocation information for a reloc(4)
/fmod, fabs: floor, ceiling, remainder, absolute value/ . floor(3M)
ldiv: compute quotient and remainder div, ............ div(3C)
drem: IEEE floating-point remainder .................. drem(3M)
/setexportent, addexportent, remexportent, endexportent,/ exportent(3)
calendar: reminder service ........... calendar(1)
uuxqt: execute remote command requests .... uuxqt(1M)
rexec: return stream to a remote command ............. rexec(3X)
dg_lock_reset: Reset the remote file lock database and/ dg_lock_reset(2)
/Remove locks held by remote lock clients. ....... dg_lock_kill(2)
rmt: start the remote mag tape daemon ..... rmt(1M)
/library routines for remote procedure calls ..... rpc(3N)
on Uutry: try to contact remote system with debugging uutry(1M)
ct: spawn getty to a remote terminal ............ ct(1)
rtime: get remote time ................ rtime(3N)
file rmdel: remove a delta from an SCCS rmdel(1)
unlink: Remove a directory entry. .. unlink(2)
rmdir: Remove a directory file. ... rmdir(2)
umount: Remove a file system device. umount(2)
remove: remove a filename entry .... remove(3S)
calling process's/ sigrelse: Remove a signal from the ... sigrelse(2)
open file/ dg_flock: apply or remove an advisory lock on an dg_flock(3C)
circular queue. remque: Remove an element from a ... remque(3C)
directories rm, rmdir: remove, delete files or .... rm(1)
printer spooling queue lprm: remove jobs from the line .. lprm(1)
lock clients. dg_lock_kill: Remove locks held by remote dg_lock_kill(2)
shared memory id ipcrm: remove message, semaphore, or ipcrm(1)
eqn constructs deroff: remove nroff/troff, tbl, and deroff(1)
entry remove: remove a filename .. remove(3S)
a circular queue. remque: Remove an element from remque(3C)
file. rename: Change the name of a rename(2)
running processes renice: alter priority of .. renice(1)
check and interactive repair /system consistency fsck(1M)
uniq: report repeated lines in a file ... uniq(1)
clock: report CPU time used ....... clock(3C)
communication/ ipcs: report inter-process ....... ipcs(1)
blocks and inodes df: report number of free disk . df(1M)
tsniff: summary report of tape contents .... tsniff(1)
sa2, sadc: system activity report package sa1, ....... sar(1M)
timex: time a command; report process data and system/ timex(1)
ps: report process status ...... ps(1)
file uniq: report repeated lines in a . uniq(1)
sar: system activity reporter ................... sar(1)
/fgetpos, fsetpos, ftell: reposition a file pointer in a/ fseek(3S)
routines for external data representation /library ... xdr(3N)
/Process a record lock request on a filehandle. ... dg_lcntl(2)
/lpmove: start/stop the LP request scheduler and move/ lpsched(1M)
t_accept: accept a connect request .................... t_accept(3N)
t_listen: listen for a connect request .................... t_listen(3N)
Licensed material--property of copyright holder(s) Page 63
index(0) DG/UX 4.30 index(0)
confirmation from a connect request /receive the ...... t_rcvconnect(3N)
send user-initiated disconnect request t_snddis: ......... t_snddis(3N)
reject: allow/prevent LP requests accept, .......... accept(1M)
a BIOD server for NFS client requests. /Starts ......... async_daemon(2)
LP request scheduler and move requests /start/stop the .. lpsched(1M)
spooler lpr: Send print requests to a line printer . lpr(1)
lp, cancel: send/cancel requests to an LP line printer lp(1)
for previously delayed lock requests to complete. /Wait dg_lock_wait(2)
uuxqt: execute remote command requests ................... uuxqt(1M)
dialups: devices requiring a dial-up password. dialups(4)
to a sensible state reset: reset the teletype bits reset(1)
sde-target: Print commands to reset software development/ sde-target(1)
database and/ dg_lock_reset: Reset the remote file lock . dg_lock_reset(2)
sensible state reset: reset the teletype bits to a reset(1)
Synchronize disk and memory resident file system/ sync: sync(2)
res_mkquery, res_send, res_init, dn_comp, dn_expand:/ resolver(3)
res_init, dn_comp, dn_expand:/ res_mkquery, res_send, ..... resolver(3)
res_init, dn_comp, dn_expand: resolver routines /res_send, resolver(3)
getrlimit: Get system resource consumption limits. getrlimit(2)
setrlimit: Set system resource consumption limits. setrlimit(2)
vlimit: control maximum system resource consumption ....... vlimit(3C)
dg_set_cpd_limits: Change the resource limits of a control/ dg_set_cpd_limits(2)
vtimes: get information about resource usage ............. vtimes(3C)
/Get information about resource utilization. ...... getrusage(2)
dn_expand:/ res_mkquery, res_send, res_init, dn_comp, resolver(3)
restore: incrementally restore a DG/UX file system restore(1M)
a DG/UX file system restore: incrementally restore restore(1M)
that contained in a/ sigret: Restore the process state to sigret(2)
and usage examples usage: retrieve a command description usage(1)
disconnect t_rcvdis: retrieve information from .. t_rcvdis(3N)
object file symbol/ ldgetname: retrieve symbol name for ... ldgetname(3X)
to an error code. strerror: Return a string corresponding strerror(3C)
for a process/ dg_file_info: return file usage information dg_file_info(2)
abs, labs: return integer absolute value abs(3C)
logname: return login name of user .. logname(3X)
command rexec: return stream to a remote .. rexec(3X)
the processor status/ getpsr: Return the current contents of getpsr(2)
export entry/ getfh: Return the file handle of the getfh(2)
files the/ getdtablesize: Return the number of open .. getdtablesize(2)
first set bit in an/ ffs: Return the position of the . ffs(3C)
name getenv: return value for environment getenv(3C)
stat: data returned by stat system call stat(5)
ruserok: routines for returning a rcmd, rresvport, rcmd(3X)
system's/ dg_process_info: Returns information about the dg_process_info(2)
dg_ext_errno: This function returns the extended errno for/ dg_ext_errno(2)
realpath: returns the real file name. realpath(3)
characters in each line of/ rev: reverse order of ...... rev(1)
col: filter reverse line-feeds ......... col(1)
each line of file rev: reverse order of characters in rev(1)
ci: check in RCS revisions .................. ci(1)
co: check out RCS revisions .................. co(1)
rcsdiff: compare RCS revisions .................. rcsdiff(1)
Licensed material--property of copyright holder(s) Page 64
index(0) DG/UX 4.30 index(0)
rcsmerge: merge RCS revisions .................. rcsmerge(1)
ftell: reposition a/ fseek, rewind, fgetpos, fsetpos, .. fseek(3S)
/readdir, telldir, seekdir, rewinddir, closedir: directory/ directory(3X)
creat: Create a new file or rewrite an existing one. ... creat(2)
remote command rexec: return stream to a .. rexec(3X)
occurrence of a character in/ rindex: Search for the last rindex(3C)
other information about RCS/ rlog: print log messages and rlog(1)
files or directories rm, rmdir: remove, delete .. rm(1)
read mail mail, rmail: send mail to users or mail(1)
SCCS file rmdel: remove a delta from an rmdel(1)
file. rmdir: Remove a directory .. rmdir(2)
directories rm, rmdir: remove, delete files or rm(1)
magnetic tape interface rmt: character special ..... rmt(7)
daemon rmt: start the remote mag tape rmt(1M)
chroot: change root directory for a command chroot(1M)
process. chroot: Changes the root directory of the calling chroot(2)
logarithm, power, square root functions /exponential, exp(3M)
dg_getrootkey: Get root's secret key .......... dg_getrootkey(2)
atexit: register termination routine .................... atexit(3C)
with/ dg_sys_info: This routine supplies the caller dg_sys_info(2)
random number generator; routines for changing/ /better random(3)
/xdr_wrapstring: library routines for external data/ xdr(3N)
/xprt_unregister: library routines for remote procedure/ rpc(3N)
rcmd, rresvport, ruserok: routines for returning a ... rcmd(3X)
copysign: IEEE floating-point routines finite, unordered, ieeefp(3C)
ldfcn: executable file access routines in DG/UX .......... ldfcn(4)
localeconv: localization routines setlocale, ....... locale(3C)
expression compile and match routines regexp: regular .. regexp(5)
dn_comp, dn_expand: resolver routines /res_send, res_init, resolver(3)
terminal independent operation routines /tgoto, tputs: ... termcap(3X)
getrpcbynumber: get RPC entry /getrpcbyname, .. getrpcent(3N)
getrpcport: get RPC port number ............ getrpcport(3R)
/mult, mdiv, pow, gcd, invert, rpow, msqrt, mcmp, move, min,/ mp(3X)
for returning a rcmd, rresvport, ruserok: routines rcmd(3X)
programming language sh, rsh: shell, the command .... sh(1)
rtime: get remote time ..... rtime(3N)
lower priority nice: run a command at a higher or nice(1)
hangups and quits nohup: run a command immune to .... nohup(1)
runacct: run daily accounting ....... runacct(1M)
runacct: run daily accounting runacct(1M)
renice: alter priority of running processes .......... renice(1)
returning a rcmd, rresvport, ruserok: routines for ...... rcmd(3X)
activity report package sa1, sa2, sadc: system ..... sar(1M)
report package sa1, sa2, sadc: system activity . sar(1M)
editing activity sact: print current SCCS file sact(1)
package sa1, sa2, sadc: system activity report sar(1M)
sar: system activity reporter sar(1)
set the real-, effective-, and saved-group-ids setgid: ... setgid(2)
Set the real-, effective-, and saved-group-ids. setregid: setregid(2)
Set the real-, effective-, and saved-user-ids. setreuid: . setreuid(2)
Set the real-, effective-, and saved-user-ids. setuid: ... setuid(2)
space allocation. sbrk: Change data segment .. sbrk(2)
Licensed material--property of copyright holder(s) Page 65
index(0) DG/UX 4.30 index(0)
scandir, alphasort: scan a directory ........... scandir(3)
directory scandir, alphasort: scan a . scandir(3)
formatted input scanf, fscanf, sscanf: convert scanf(3S)
bfs: big file scanner .................... bfs(1)
language awk: pattern scanning and processing .... awk(1)
language oawk: old pattern scanning and processing .... oawk(1)
the delta commentary of an SCCS delta cdc: change .... cdc(1)
comb: combine SCCS deltas ................ comb(1)
make a delta (change) to an SCCS file delta: .......... delta(1)
sact: print current SCCS file editing activity . sact(1)
get: get a version of an SCCS file .................. get(1)
prs: print an SCCS file .................. prs(1)
rmdel: remove a delta from an SCCS file .................. rmdel(1)
compare two versions of an SCCS file sccsdiff: ....... sccsdiff(1)
sccsfile: format of SCCS file .................. sccsfile(4)
sccstorcs: build RCS file from SCCS file .................. sccstorcs(1)
undo a previous get of an SCCS file unget: .......... unget(1)
val: validate SCCS file .................. val(1)
admin: create and administer SCCS files ................. admin(1)
what: identify SCCS files ................. what(1)
of an SCCS file sccsdiff: compare two versions sccsdiff(1)
sccsfile: format of SCCS file sccsfile(4)
SCCS file sccstorcs: build RCS file from sccstorcs(1)
/start/stop the LP request scheduler and move requests lpsched(1M)
transport/ uusched: the scheduler for the uucp file uusched(1M)
getpriority: Get process scheduling priority. ....... getpriority(2)
setpriority: Set process scheduling priority. ....... setpriority(2)
screen image file. scr_dump: format of curses . scr_dump(4)
clear: clear terminal screen ..................... clear(1)
optimization/ curses: terminal screen handling and ........ curses(3X)
scr_dump: format of curses screen image file. ......... scr_dump(4)
display/ vi, vedit, view: screen-oriented (visual) ... vi(1)
inittab: script for the init process inittab(4)
terminal session script: make typescript of a script(1G)
cisc: AViiON family SCSI adapter subsystem ..... cisc(7)
insc: AViiON family SCSI adapter subsystem ..... insc(7)
subsystem sd: AViiON family disk ..... sd(7)
sdb: symbolic debugger ..... sdb(1)
environment sde: software development .. sde(5)
environment data base sdetab: software development sdetab(4)
reset software development/ sde-target: Print commands to sde-target(1)
program sdiff: side-by-side difference sdiff(1)
/mout, omout, fmout, m_out, sdiv, itom: multiple precision/ mp(3X)
grep, egrep, fgrep: search a file for a pattern grep(1)
bsearch: binary search a sorted table ...... bsearch(3C)
accounting file(s) acctcom: search and print process ... acctcom(1)
lsearch, lfind: linear search and update .......... lsearch(3)
occurrence of a/ index: Search for the first ....... index(3C)
of a character in a/ rindex: Search for the last occurrence rindex(3C)
hcreate, hdestroy: manage hash search tables hsearch, .... hsearch(3)
tdelete, twalk: manage binary search trees tsearch, tfind, tsearch(3)
dg_getrootkey: Get root's secret key ................. dg_getrootkey(2)
Licensed material--property of copyright holder(s) Page 66
index(0) DG/UX 4.30 index(0)
/Store a client's secret key in the keyserver. dg_setsecretkey(2)
object/ /read an indexed/named section header of a common . ldshread(3X)
/to line number entries of a section of a common object/ ldlseek(3X)
/to relocation entries of a section of a common object/ ldrseek(3X)
/seek to an indexed/named section of a common object/ ldsseek(3X)
files size: print section sizes of common object size(1)
sed: stream editor ......... sed(1)
mrand48, jrand48, srand48, seed48, /lrand48, nrand48, drand48(3)
section of/ ldsseek, ldnsseek: seek to an indexed/named ... ldsseek(3X)
a section/ ldlseek, ldnlseek: seek to line number entries of ldlseek(3X)
a section/ ldrseek, ldnrseek: seek to relocation entries of ldrseek(3X)
header of an object/ ldohseek: seek to the optional file .. ldohseek(3X)
object file ldtbseek: seek to the symbol table of an ldtbseek(3X)
/opendir, readdir, telldir, seekdir, rewinddir, closedir:/ directory(3X)
shmat: attach a shared memory segment .................... shmat(2)
shmdt: Detach a shared memory segment. ................... shmdt(2)
shmget: Get shared memory segment. ................... shmget(2)
brk: Change data segment space allocation ... brk(2)
memctl: Change data segment space allocation. .. memctl(2)
sbrk: Change data segment space allocation. .. sbrk(2)
to two sorted files comm: select or reject lines common comm(1)
conditions. select: Wait for I/O ....... select(2)
of a file cut: cut out selected fields of each line cut(1)
semctl: Semaphore control operations. semctl(2)
semsys: Perform a semaphore operation. ....... semsys(2)
semop: Semaphore operations. ...... semop(2)
ipcrm: remove message, semaphore, or shared memory id ipcrm(1)
semget: Get a set of semaphores. ................ semget(2)
operations. semctl: Semaphore control .. semctl(2)
semaphores. semget: Get a set of ....... semget(2)
semop: Semaphore operations. semop(2)
operation. semsys: Perform a semaphore semsys(2)
t_sndudata: send a data unit ........... t_sndudata(3N)
send: Send a message from a socket. send(2)
sendmsg: Send a message from a socket. sendmsg(2)
sendto: Send a message from a socket. sendto(2)
msgsnd: Send a message. ............ msgsnd(2)
raise: send a signal .............. raise(3C)
kill: Send a signal to a process. kill(2)
over a connection t_snd: send data or expedited data t_snd(3N)
mail mail, rmail: send mail to users or read . mail(1)
printer spooler lpr: Send print requests to a line lpr(1)
socket. send: Send a message from a send(2)
process group. killpg: Send signal to a process or a killpg(2)
request t_snddis: send user-initiated disconnect t_snddis(3N)
line printer lp, cancel: send/cancel requests to an LP lp(1)
socket. sendmsg: Send a message from a sendmsg(2)
socket. sendto: Send a message from a sendto(2)
reset the teletype bits to a sensible state reset: ..... reset(1)
receive data or expedited data sent over a connection t_rcv: t_rcv(3N)
processor grfx: AViiON 300 series workstation graphics grfx(7)
keyboard kbd: AViiON 300 series workstation system .. kbd(7)
Licensed material--property of copyright holder(s) Page 67
index(0) DG/UX 4.30 index(0)
async_daemon: Starts a BIOD server for NFS client/ ..... async_daemon(2)
the WORM magnetic tape device server wmtd: start ........ wmtd(1M)
calendar: reminder service .................... calendar(1)
setservent, endservent: get service entry /getservbyname, getservent(3N)
/get protocol-specific service information ........ t_getinfo(3N)
/passwd, protocols, group or services information to/ ... bcs_cat(1M)
ID. setsid: Create session and set process group setsid(2)
make typescript of a terminal session script: ........... script(1G)
alarm: Set a process alarm clock. . alarm(2)
mask. umask: Set and get file creation .. umask(2)
context. sigstack: Set and/or get signal stack sigstack(2)
ascii: map of ASCII character set ........................ ascii(5)
the position of the first set bit in an integer. /Return ffs(3C)
suspend the/ berk_sigpause: Set blocked signals and .... berk_sigpause(2)
settimeofday: Set date and time. ......... settimeofday(2)
timezone: set default system time zone timezone(4)
execution env: set environment for command env(1)
modification times. utime: Set file access and ........ utime(2)
modification times utimes: set file access and ........ utimes(2)
umask: set file-creation mode mask umask(1)
ID. tcsetpgrp: Set foreground process group tcsetpgrp(3)
setgroups: Set group access list. ..... setgroups(2)
parameters tkey: set label and data translation tkey(1)
or destroy a/ msgctl: Get or set message queue attributes msgctl(2)
setdomainname: Set name of current domain. setdomainname(2)
sethostname: Set name of current host. .. sethostname(2)
sigblock: Add to set of blocked signals. .... sigblock(2)
/to the calling process's set of blocked signals. .... sighold(2)
/from the calling process's set of blocked signals. .... sigrelse(2)
sigsetmask: Specify set of blocked signals. .... sigsetmask(2)
sigfillset: Fill in the set of implementation-defined/ sigfillset(2)
semget: Get a set of semaphores. ......... semget(2)
setsockopt: Set options on sockets. .... setsockopt(2)
control. setpgid: Set process group ID for job setpgid(2)
setsid: Create session and set process group ID. ...... setsid(2)
priority. setpriority: Set process scheduling ..... setpriority(2)
setpgrp: Set process-group-id. ...... setpgrp(2)
setpgrp2: Set process-group-id. ...... setpgrp2(2)
tcgetattr, tcsetattr: Get and set state. ................. tcsetattr(3)
consumption/ setrlimit: Set system resource ........ setrlimit(2)
tabs: set tabs on a terminal ..... tabs(1)
berk_stty: set terminal options ....... berk_stty(1)
speed, and line/ getty: set terminal type, modes, .. getty(1M)
speed, and line/ uugetty: set terminal type, modes, .. uugetty(1M)
date: print and set the date ............... date(1)
att_stty: set the options for a terminal att_stty(1)
stty: set the options for a terminal stty(1)
register. setpsr: Set the processor status ... setpsr(2)
saved-group-ids setgid: set the real-, effective-, and setgid(2)
saved-group-ids. setregid: Set the real-, effective-, and setregid(2)
saved-user-ids. setreuid: Set the real-, effective-, and setreuid(2)
saved-user-ids. setuid: Set the real-, effective-, and setuid(2)
Licensed material--property of copyright holder(s) Page 68
index(0) DG/UX 4.30 index(0)
signal to/ sigignore: Set the signal action of a . sigignore(2)
stime: Set time. .................. stime(2)
current host. sethostid: Set unique identifier of ... sethostid(2)
profiling for this/ profil: Set up execution time ...... profil(2)
ulimit: Get and set user limits. ........... ulimit(2)
buffering to a stream setbuf, setvbuf: assign .... setbuf(3S)
a specified stream setbuffer: Assign a buffer to setbuffer(3C)
/toascii, _tolower, _toupper, setchrclass: character/ .... ctype(3C)
current domain. setdomainname: Set name of . setdomainname(2)
exportent, getexportent, setexportent, addexportent,/ exportent(3)
/getfsfile, getfstype, setfsent, endfsent: get/ ... getfsent(3)
effective-, and/ setgid: set the real-, ..... setgid(2)
getgrent, getgrgid, getgrnam, setgrent, endgrent, fgetgrent:/ getgrent(3)
list. setgroups: Set group access setgroups(2)
/gethostbyaddr, gethostbyname, sethostent, endhostent: get/ gethostent(3N)
identifier of current host. sethostid: Set unique ...... sethostid(2)
current host. sethostname: Set name of ... sethostname(2)
interval timers. setitimer: Sets one of the . setitimer(2)
goto setjmp, longjmp: non-local . setjmp(3C)
hashing encryption crypt, setkey, encrypt: generate .. crypt(3)
buffering for a specified/ setlinebuf: Assign line .... setlinebuf(3C)
localization routines setlocale, localeconv: ..... locale(3C)
syslog, openlog, closelog, setlogmask: control system log syslog(3)
setmnt: establish mount table setmnt(1M)
endmntent,/ getmntent, setmntent, addmntent, ...... getmntent(3)
/getnetbyaddr, getnetbyname, setnetent, endnetent: get/ . getnetent(3N)
innetgr: get/ getnetgrent, setnetgrent, endnetgrent, .. getnetgrent(3N)
for job control. setpgid: Set process group ID setpgid(2)
setpgrp: Set process-group-id. setpgrp(2)
process-group-id. setpgrp2: Set .............. setpgrp2(2)
scheduling priority. setpriority: Set process ... setpriority(2)
protocol/ /getprotobyname, setprotoent, endprotoent: get getprotoent(3N)
status register. setpsr: Set the processor .. setpsr(2)
getpwent, getpwuid, getpwnam, setpwent, endpwent, setpwfile,/ getpwent(3)
/getpwnam, setpwent, endpwent, setpwfile, fgetpwent: get/ . getpwent(3)
effective-, and/ setregid: Set the real-, ... setregid(2)
effective-, and/ setreuid: Set the real-, ... setreuid(2)
consumption limits. setrlimit: Set system resource setrlimit(2)
timers. setitimer: Sets one of the interval ... setitimer(2)
sigismember: Manipulate signal sets. /sigaddset, sigdelset, sigsetops(3)
/getservbyport, getservbyname, setservent, endservent: get/ getservent(3N)
process group ID. setsid: Create session and set setsid(2)
sockets. setsockopt: Set options on . setsockopt(2)
random, srandom, initstate, setstate: better random number/ random(3)
time. settimeofday: Set date and . settimeofday(2)
login time profile: setting up an environment at profile(4)
label and record translation settings tdisplay: display tdisplay(1)
gettydefs: speed and terminal settings used by getty ..... gettydefs(4)
effective-, and/ setuid: Set the real-, ..... setuid(2)
/getutid, getutline, pututline, setutent, endutent, utmpname:/ getut(3)
stream setbuf, setvbuf: assign buffering to a setbuf(3S)
data in a/ sputl, sgetl: access long integer . sputl(3X)
Licensed material--property of copyright holder(s) Page 69
index(0) DG/UX 4.30 index(0)
programming language sh, rsh: shell, the command sh(1)
operations. shmctl: Shared memory control ...... shmctl(2)
remove message, semaphore, or shared memory id ipcrm: ... ipcrm(1)
shmsys: Perform a shared memory operation. ... shmsys(2)
shmat: attach a shared memory segment ...... shmat(2)
shmdt: Detach a shared memory segment. ..... shmdt(2)
shmget: Get shared memory segment. ..... shmget(2)
/from C programs to implement shared strings in DG/UX .... xstr(1)
having a C-like/ csh: invoke a shell (command interpreter) csh(1)
system: issue a shell command .............. system(3S)
shl: shell layer manager in DG/UX shl(1)
shutacct, startup, turnacct: shell procedures for/ /prtacct, acctsh(1M)
language sh, rsh: shell, the command programming sh(1)
DG/UX shl: shell layer manager in shl(1)
segment shmat: attach a shared memory shmat(2)
operations. shmctl: Shared memory control shmctl(2)
segment. shmdt: Detach a shared memory shmdt(2)
segment. shmget: Get shared memory .. shmget(2)
memory operation. shmsys: Perform a shared ... shmsys(2)
groups: show group memberships ..... groups(1)
full-duplex/ shutdown: Shut down part of a ........ shutdown(2)
system state shutdown: shut down system, change ... shutdown(1M)
/prctmp, prdaily, prtacct, shutacct, startup, turnacct:/ acctsh(1M)
full-duplex connection. shutdown: Shut down part of a shutdown(2)
change system state shutdown: shut down system, shutdown(1M)
program sdiff: side-by-side difference .... sdiff(1)
hfm: high sierra file manager ........ hfm(4)
assembly language sifilter: preprocess MC88100 sifilter(1)
signal action. sigaction: Examine and change sigaction(2)
/sigemptyset, sigfillset, sigaddset, sigdelset,/ ..... sigsetops(3)
blocked signals. sigblock: Add to set of .... sigblock(2)
/sigfillset, sigaddset, sigdelset, sigismember:/ ... sigsetops(3)
sigaddset,/ sigsetops: sigemptyset, sigfillset, ... sigsetops(3)
implementation-defined/ sigfillset: Fill in the set of sigfillset(2)
sigsetops: sigemptyset, sigfillset, sigaddset,/ .... sigsetops(3)
calling process's set of/ sighold: Add a signal to the sighold(2)
action of a signal to/ sigignore: Set the signal .. sigignore(2)
sets. /sigaddset, sigdelset, sigismember: Manipulate signal sigsetops(3)
sigsetjmp, siglongjmp: Non-local jumps. sigsetjmp(3)
login: sign on .................... login(1)
'ignore'. sigignore: Set the signal action of a signal to sigignore(2)
sigaction: Examine and change signal action. ............. sigaction(2)
sigpause: Clear a blocked signal and suspend the process/ sigpause(2)
/signal: simplified software signal facilities .......... berk_signal(3)
state to that contained in a signal frame. /the process sigret(2)
process's/ sigrelse: Remove a signal from the calling .... sigrelse(2)
suspend the process until a signal is caught. /signals and berk_sigpause(2)
pause: Suspend process until a signal is caught. .......... pause(2)
suspend the process until a signal is caught. /signal and sigpause(2)
raise: send a signal ..................... raise(3C)
sigismember: Manipulate signal sets. /sigdelset, .. sigsetops(3)
to do upon presentation of a signal. signal: Specify what signal(2)
Licensed material--property of copyright holder(s) Page 70
index(0) DG/UX 4.30 index(0)
to do upon presentation of a signal. sigset: Specify what sigset(2)
sigsuspend: Wait for a signal. .................... sigsuspend(2)
to do upon presentation of a signal. sigvec: Specify what sigvec(2)
signal/ berk_signal, signal: simplified software berk_signal(3)
upon presentation of a/ signal: Specify what to do . signal(2)
sigstack: Set and/or get signal stack context. ...... sigstack(2)
kill: Send a signal to a process. ....... kill(2)
process group. killpg: Send signal to a process or a ... killpg(2)
/Set the signal action of a signal to 'ignore'. ........ sigignore(2)
process's set/ sighold: Add a signal to the calling ...... sighold(2)
berk_sigpause: Set blocked signals and suspend the/ ... berk_sigpause(2)
Add to set of blocked signals. sigblock: ........ sigblock(2)
set of implementation-defined signals. /Fill in the ..... sigfillset(2)
process's set of blocked signals. /to the calling .. sighold(2)
sigpending: Examine pending signals. ................... sigpending(2)
Examine and change blocked signals. sigprocmask: ..... sigprocmask(2)
process's set of blocked signals. /from the calling sigrelse(2)
Specify set of blocked signals. sigsetmask: ...... sigsetmask(2)
ssignal, gsignal: software signals .................... ssignal(3)
signal and suspend the/ sigpause: Clear a blocked .. sigpause(2)
signals. sigpending: Examine pending sigpending(2)
change blocked signals. sigprocmask: Examine and ... sigprocmask(2)
the calling process's set of/ sigrelse: Remove a signal from sigrelse(2)
state to that contained in a/ sigret: Restore the process sigret(2)
upon presentation of a/ sigset: Specify what to do . sigset(2)
Non-local jumps. sigsetjmp, siglongjmp: ..... sigsetjmp(3)
blocked signals. sigsetmask: Specify set of . sigsetmask(2)
sigfillset, sigaddset,/ sigsetops: sigemptyset, .... sigsetops(3)
signal stack context. sigstack: Set and/or get ... sigstack(2)
sigsuspend: Wait for a signal. sigsuspend(2)
upon presentation of a/ sigvec: Specify what to do . sigvec(2)
lex: generate programs for simple lexical tasks ....... lex(1)
troff preprocessor for drawing simple pictures pic: ...... pic(1)
rand, srand: simple random-number generator rand(3C)
berk_signal, signal: simplified software signal/ berk_signal(3)
atan, atan2:/ trig: sin, cos, tan, asin, acos, . trig(3M)
functions sinh, cosh, tanh: hyperbolic sinh(3M)
deblock: change blocking size ....................... deblock(1)
Get the system page size. getpagesize: ........ getpagesize(2)
common object files size: print section sizes of size(1)
fez: display file element sizes ...................... fez(1)
size: print section sizes of common object files size(1)
an interval sleep: suspend execution for sleep(1)
interval sleep: suspend execution for sleep(3C)
for typesetting viewgraphs and slides /a troff macro package mv(5)
mvt: typeset view graphs and slides ..................... mvt(1)
current/ ttyslot: find the slot in the utmp file of the ttyslot(3C)
spline: interpolate smooth curve ............... spline(1G)
compiler sno: SNOBOL interpreter and sno(1)
compiler sno: SNOBOL interpreter and ..... sno(1)
Accept a connection on a socket. accept: ........... accept(2)
bind: Bind a name to a socket. .................... bind(2)
Licensed material--property of copyright holder(s) Page 71
index(0) DG/UX 4.30 index(0)
Initiate a connection on a socket. connect: .......... connect(2)
communication. socket: Create an endpoint for socket(2)
getsockopt: Get options on a socket. .................... getsockopt(2)
/Start an NFS daemon on the socket identified by <socket>. nfssvc(2)
Listen for connections on a socket. listen: ........... listen(2)
getsockname: Get socket name. ............... getsockname(2)
on the socket identified by <socket>. /Start an NFS daemon nfssvc(2)
recv: Receive a message from a socket. .................... recv(2)
Receive a message from a socket. recvfrom: ......... recvfrom(2)
Receive a message from a socket. recvmsg: .......... recvmsg(2)
send: Send a message from a socket. .................... send(2)
sendmsg: Send a message from a socket. .................... sendmsg(2)
sendto: Send a message from a socket. .................... sendto(2)
connected sockets. socketpair: Create a pair of socketpair(2)
setsockopt: Set options on sockets. ................... setsockopt(2)
Create a pair of connected sockets. socketpair: ...... socketpair(2)
environment data base sdetab: software development ....... sdetab(4)
environment sde: software development ....... sde(5)
/Print commands to reset software development/ ...... sde-target(1)
/signal: simplified software signal facilities . berk_signal(3)
ssignal, gsignal: software signals ........... ssignal(3)
sort: sort and/or merge files .... sort(1)
qsort: quicker sort ....................... qsort(3C)
sort: sort and/or merge files sort(1)
tsort: topological sort ....................... tsort(1)
or reject lines common to two sorted files comm: select . comm(1)
bsearch: binary search a sorted table ............... bsearch(3C)
for program whereis: locate source, binary, and or manual whereis(1)
message file by massaging C source mkstr: create an error mkstr(1)
brk: Change data segment space allocation ........... brk(2)
memctl: Change data segment space allocation. .......... memctl(2)
sbrk: Change data segment space allocation. .......... sbrk(2)
lock or unlock address space mlockall, munlockall: mlockall(3C)
terminal ct: spawn getty to a remote .... ct(1)
memory efficient way. vfork: Spawn new process in a virtual vfork(2)
dsk: block special disk interface ..... dsk(7)
rdsk: character special disk interface ..... rdsk(7)
definitions for eqn/ eqnchar: special equation character . eqnchar(5)
mkfifo: Make a FIFO special file. .............. mkfifo(3)
mknod: build special file ............... mknod(1M)
introduction to DG/UX System special files intro: ...... intro(7)
DGC AViiON family line printer special files lp: ......... lp(7)
interface rmt: character special magnetic tape ...... rmt(7)
mknod: Make a directory, or a special or ordinary file. .. mknod(2)
/an open file descriptor onto a specific descriptor. ....... dup2(2)
cftime: language specific strings ........... cftime(4)
fspec: format specification in text files fspec(4)
stop or/ wait4: Wait for the specified child process to . wait4(2)
tposn: position tape to specified file ............. tposn(1)
truncate: Truncate a file to a specified length. .......... truncate(2)
Assign a buffer to a specified stream setbuffer: setbuffer(3C)
Assign line buffering for a specified stream setlinebuf: setlinebuf(3C)
Licensed material--property of copyright holder(s) Page 72
index(0) DG/UX 4.30 index(0)
System device for/ swapon: specify additional DG/UX ... swapon(1M)
signals. sigsetmask: Specify set of blocked ..... sigsetmask(2)
presentation of a/ signal: Specify what to do upon .... signal(2)
presentation of a/ sigset: Specify what to do upon .... sigset(2)
presentation of a/ sigvec: Specify what to do upon .... sigvec(2)
/set terminal type, modes, speed, and line discipline . getty(1M)
/set terminal type, modes, speed, and line discipline . uugetty(1M)
used by getty gettydefs: speed and terminal settings gettydefs(4)
hashcheck: find spelling/ spell, hashmake, spellin, .. spell(1)
spelling/ spell, hashmake, spellin, hashcheck: find ... spell(1)
spellin, hashcheck: find spelling errors /hashmake, spell(1)
curve spline: interpolate smooth . spline(1G)
split: split a file into pieces ... split(1)
csplit: context split ...................... csplit(1)
fsplit: split f77 or ratfor files .. fsplit(1)
pieces split: split a file into ... split(1)
uucleanup: uucp spool directory clean-up ... uucleanup(1M)
program lpq: spool queue examination .... lpq(1)
requests to a line printer spooler lpr: Send print ... lpr(1)
jobs from the line printer spooling queue lprm: remove lprm(1)
lpadmin: configure the LP spooling system ............ lpadmin(1M)
output printf, fprintf, sprintf: print formatted ... printf(3S)
integer data in a/ sputl, sgetl: access long .. sputl(3X)
power,/ exp, log, log10, pow, sqrt: exponential, logarithm, exp(3M)
exponential, logarithm, power, square root functions /sqrt: exp(3M)
generator rand, srand: simple random-number rand(3C)
nrand48, mrand48, jrand48, srand48, seed48, /lrand48, drand48(3)
better random number/ random, srandom, initstate, setstate: random(3)
input scanf, fscanf, sscanf: convert formatted .. scanf(3S)
signals ssignal, gsignal: software . ssignal(3)
subsystem st: AViiON family tape ..... st(7)
Set and/or get signal stack context. sigstack: .. sigstack(2)
package stdio: standard buffered input/output stdio(3S)
/Print an error message to standard error. ............ extended_perror(3C)
communication package ftok: standard interprocess ...... stdipc(3C)
or services information to standard output /group .... bcs_cat(1M)
concatenate and type files to standard output cat: ...... cat(1)
socket identified by/ nfssvc: Start an NFS daemon on the . nfssvc(2)
/remote file lock database and start the lock reclaim grace/ dg_lock_reset(2)
daemon rmt: start the remote mag tape .. rmt(1M)
device server wmtd: start the WORM magnetic tape wmtd(1M)
beginning users starter: information for ... starter(1)
client/ async_daemon: Starts a BIOD server for NFS async_daemon(2)
lpsched, lpshut, lpmove: start/stop the LP request/ . lpsched(1M)
/prdaily, prtacct, shutacct, startup, turnacct: shell/ .. acctsh(1M)
system call stat: data returned by stat stat(5)
stat: Get file status. ..... stat(2)
stat: data returned by stat system call ........... stat(5)
information about current IPCs state. dg_ipc_info: Get ... dg_ipc_info(2)
getitimer: get the current state of one of the interval/ getitimer(2)
teletype bits to a sensible state reset: reset the .... reset(1)
down system, change system state shutdown: shut ...... shutdown(1M)
Licensed material--property of copyright holder(s) Page 73
index(0) DG/UX 4.30 index(0)
tcsetattr: Get and set state. tcgetattr, ......... tcsetattr(3)
t_getstate: get the current state ...................... t_getstate(3N)
sigret: Restore the process state to that contained in a/ sigret(2)
/Synchronize a file's in-core state with that on disk. ... fsync(2)
a mounted file system. statfs: Get information about statfs(2)
systems fstab: static information about file fstab(4)
ustat: Get file system device statistics. ................ ustat(2)
dg_mstat: Get file status. .................... dg_mstat(2)
fstat: Get file status. .................... fstat(2)
dg_fstat: Get extended file status information. ........ dg_fstat(2)
dg_stat: Get extended file status information. ........ dg_stat(2)
lpstat: print LP lineprinter status information ......... lpstat(1)
feof, clearerr, fileno: stream status inquiries ferror, .. ferror(3S)
uustat: uucp status inquiry and job control uustat(1)
communication facilities status /report inter-process ipcs(1)
lstat: Get file status. .................... lstat(2)
ps: report process status ..................... ps(1)
contents of the processor status register. /the current getpsr(2)
setpsr: Set the processor status register. ........... setpsr(2)
stat: Get file status. .................... stat(2)
input/output package stdio: standard buffered ... stdio(3S)
stime: Set time. ........... stime(2)
Wait for child process to stop or terminate. wait3: . wait3(2)
the specified child process to stop or terminate. /Wait for wait4(2)
processor halt: stop the DG/UX System ...... halt(1M)
the/ dg_setsecretkey: Store a client's secret key in dg_setsecretkey(2)
nextkey: data/ dbminit, fetch, store, delete, firstkey, ... dbm(3X)
messages strace: print STREAMS trace strace(1M)
strncmp, strcoll, strxfrm,/ strcat, strncat, strcmp, ... string(3C)
/strcpy, strncpy, strlen, strchr, strrchr, strpbrk,/ . string(3C)
cleanup program strclean: STREAMS error logger strclean(1M)
strxfrm,/ strcat, strncat, strcmp, strncmp, strcoll, .. string(3C)
/strncat, strcmp, strncmp, strcoll, strxfrm, strcpy,/ . string(3C)
/strncmp, strcoll, strxfrm, strcpy, strncpy, strlen,/ .. string(3C)
/strrchr, strpbrk, strspn, strcspn, strstr, strtok:/ .. string(3C)
allocated area of memory. strdup: Copy a string to an strdup(3C)
sed: stream editor .............. sed(1)
fflush: close or flush a stream fclose, ............ fclose(3S)
fopen, freopen, fdopen: open a stream ..................... fopen(3S)
reposition a file pointer in a stream /fsetpos, ftell: ... fseek(3S)
get character or word from a stream /getchar, fgetc, getw: getc(3S)
getmsg: Get a message from a stream. .................... getmsg(2)
fgets: get a string from a stream gets, .............. gets(3S)
put character or word on a stream /putchar, fputc, putw: putc(3S)
putmsg: Pass a message down a stream. .................... putmsg(2)
puts, fputs: put a string on a stream ..................... puts(3S)
setvbuf: assign buffering to a stream setbuf, ............ setbuf(3S)
Assign a buffer to a specified stream setbuffer: ......... setbuffer(3C)
line buffering for a specified stream setlinebuf: Assign . setlinebuf(3C)
/feof, clearerr, fileno: stream status inquiries .... ferror(3S)
rexec: return stream to a remote command . rexec(3X)
push character back into input stream ungetc: ............ ungetc(3S)
Licensed material--property of copyright holder(s) Page 74
index(0) DG/UX 4.30 index(0)
commands streamio: STREAMS ioctl .... streamio(7)
open any minor device on a STREAMS driver clone: ..... clone(7)
program strclean: STREAMS error logger cleanup strclean(1M)
strerr: STREAMS error logger daemon strerr(1M)
event/ log: interface to STREAMS error logging and .. log(7)
streamio: STREAMS ioctl commands ..... streamio(7)
conditions exist on open streams. /whether certain . poll(2)
strace: print STREAMS trace messages ..... strace(1M)
daemon strerr: STREAMS error logger strerr(1M)
corresponding to an error/ strerror: Return a string .. strerror(3C)
/ascftime, difftime, mktime, strftime, tzset: date and time/ ctime(3C)
long integer and base-64 ASCII string /l64a: convert between a64l(3)
error/ strerror: Return a string corresponding to an . strerror(3C)
floating-point number to string /fcvt, gcvt: convert ecvt(3)
gets, fgets: get a string from a stream ....... gets(3S)
occurrence of a character in a string. /Search for the first index(3C)
puts, fputs: put a string on a stream ......... puts(3S)
strcspn, strstr, strtok: string operations /strspn, string(3C)
occurrence of a character in a string. /Search for the last rindex(3C)
within each pair of bytes in a string. swab: Swap the bytes swab(3C)
memory. strdup: Copy a string to an allocated area of strdup(3C)
number strtod, atof: convert string to double-precision . strtod(3C)
strtoul, atol, atoi: convert string to integer strtol, . strtol(3C)
cftime: language specific strings .................... cftime(4)
strings in an object or other/ strings: find the printable strings(1)
implement/ xstr: extract strings from C programs to . xstr(1)
strings: find the printable strings in an object or other/ strings(1)
C programs to implement shared strings in DG/UX /strings from xstr(1)
information from an/ strip: strip non-executable ....... strip(1)
information from an/ strip: strip non-executable strip(1)
/strxfrm, strcpy, strncpy, strlen, strchr, strrchr,/ .. string(3C)
strcoll, strxfrm,/ strcat, strncat, strcmp, strncmp, .. string(3C)
strcat, strncat, strcmp, strncmp, strcoll, strxfrm,/ string(3C)
/strcoll, strxfrm, strcpy, strncpy, strlen, strchr,/ .. string(3C)
/strlen, strchr, strrchr, strpbrk, strspn, strcspn,/ . string(3C)
/strncpy, strlen, strchr, strrchr, strpbrk, strspn,/ . string(3C)
/strchr, strrchr, strpbrk, strspn, strcspn, strstr,/ .. string(3C)
/strpbrk, strspn, strcspn, strstr, strtok: string/ .... string(3C)
to double-precision number strtod, atof: convert string strtod(3C)
/strspn, strcspn, strstr, strtok: string operations .. string(3C)
convert string to integer strtol, strtoul, atol, atoi: strtol(3C)
string to integer strtol, strtoul, atol, atoi: convert strtol(3C)
processes using a file or file structure fuser: identify . fuser(1M)
inode: file node structure .................. inode(4)
t_alloc: allocate a library structure .................. t_alloc(3N)
t_free: free a library structure .................. t_free(3N)
/strcmp, strncmp, strcoll, strxfrm, strcpy, strncpy,/ . string(3C)
terminal stty: set the options for a stty(1)
another user su: become super-user or ... su(1)
subjects from a document subj: generate a list of ... subj(1)
ndx: create a subject-page index ......... ndx(1)
subj: generate a list of subjects from a document ... subj(1)
Licensed material--property of copyright holder(s) Page 75
index(0) DG/UX 4.30 index(0)
intro: introduction to subroutines and libraries .. intro(3)
firstkey, nextkey: data base subroutines /store, delete, dbm(3X)
dbm_clearerr: data base subroutines /dbm_error, ... ndbm(3)
cied: AViiON family disk subsystem .................. cied(7)
cimd: AViiON family disk subsystem .................. cimd(7)
cird: AViiON family disk subsystem .................. cird(7)
AViiON family SCSI adapter subsystem cisc: ........... cisc(7)
AViiON family SCSI adapter subsystem insc: ........... insc(7)
sd: AViiON family disk subsystem .................. sd(7)
st: AViiON family tape subsystem .................. st(7)
count of a file sum: print checksum and block sum(1)
du: summarize disk usage ....... du(1)
accounting/ acctcms: command summary from per-process ... acctcms(1M)
facilities in DG/UX jobs: summary of job control ..... jobs(3)
contents tsniff: summary report of tape ..... tsniff(1)
sync: update the super-block ................ sync(1M)
/periodically update the super-blocks of mounted file/ update(1M)
su: become super-user or another user . su(1)
dg_sys_info: This routine supplies the caller with/ .. dg_sys_info(2)
interval sleep: suspend execution for an ... sleep(1)
sleep: suspend execution for interval sleep(3C)
is caught. pause: Suspend process until a signal pause(2)
/Set blocked signals and suspend the process until a/ berk_sigpause(2)
/Clear a blocked signal and suspend the process until a/ sigpause(2)
/pmap_unset, registerrpc, svc_destroy, svc_freeargs,/ rpc(3N)
/svc_sendreply, svc_unregister, svcerr_auth, svcerr_decode,/ rpc(3N)
/svc_unregister, svcerr_auth, svcerr_decode, svcerr_noproc,/ rpc(3N)
/svcerr_auth, svcerr_decode, svcerr_noproc, svcerr_noprog,/ rpc(3N)
svcerr_decode, svcerr_noproc, svcerr_noprog,/ /svcerr_auth, rpc(3N)
/svcerr_noproc, svcerr_noprog, svcerr_progvers,/ .......... rpc(3N)
/svcerr_progvers, svcerr_systemerr,/ ......... rpc(3N)
/svcerr_systemerr, svcerr_weakauth,/ .......... rpc(3N)
/svcraw_create, svctcp_create, svcfd_create, svcudp_create,/ rpc(3N)
/registerrpc, svc_destroy, svc_freeargs, svc_getargs,/ rpc(3N)
/svc_destroy, svc_freeargs, svc_getargs, svc_getcaller,/ rpc(3N)
/svc_freeargs, svc_getargs, svc_getcaller, svc_getreqset,/ rpc(3N)
/svc_getcaller, svc_getreqset, svc_getreq, svc_register,/ . rpc(3N)
/svc_getargs, svc_getcaller, svc_getreqset, svc_getreq,/ rpc(3N)
/svcerr_weakauth, svcraw_create, svctcp_create,/ rpc(3N)
/svc_getreqset, svc_getreq, svc_register, svc_run,/ .... rpc(3N)
/svc_getreq, svc_register, svc_run, svc_sendreply,/ ... rpc(3N)
/svc_register, svc_run, svc_sendreply, svc_unregister,/ rpc(3N)
svcudp_create,/ /svcraw_create, svctcp_create, svcfd_create, rpc(3N)
/svctcp_create, svcfd_create, svcudp_create, user2netname,/ rpc(3N)
/svc_run, svc_sendreply, svc_unregister, svcerr_auth,/ rpc(3N)
each pair of bytes in a/ swab: Swap the bytes within swab(3C)
swapon: Add a swap device for interleaved/ swapon(2)
pair of bytes in a/ swab: Swap the bytes within each . swab(3C)
interleaved paging/swapping. swapon: Add a swap device for swapon(2)
DG/UX System device for/ swapon: specify additional . swapon(1M)
intelligent asynchronous/ syac: AViiON family ........ syac(7)
symbol/ ldgetname: retrieve symbol name for object file ldgetname(3X)
Licensed material--property of copyright holder(s) Page 76
index(0) DG/UX 4.30 index(0)
symbol name for object file symbol table entry /retrieve ldgetname(3X)
ldtbindex: compute index of symbol table entry of an/ .. ldtbindex(3X)
ldtbread: read an indexed symbol table entry of an/ .. ldtbread(3X)
syms: common object file symbol table format ........ syms(4)
ldtbseek: seek to the symbol table of an object file ldtbseek(3X)
sdb: symbolic debugger .......... sdb(1)
symlink: Create a symbolic link file. ........ symlink(2)
Read the contents of a symbolic link. readlink: .. readlink(2)
of common terms and symbols glossary: definitions glossary(1)
link file. symlink: Create a symbolic . symlink(2)
symbol table format syms: common object file ... syms(4)
memory resident file system/ sync: Synchronize disk and . sync(2)
sync: update the super-block sync(1M)
/correct the time to allow synchronization of the system/ adjtime(2)
state with that on/ fsync: Synchronize a file's in-core fsync(2)
resident file system/ sync: Synchronize disk and memory sync(2)
t_sync: synchronize transport library t_sync(3N)
from a/ dg_unbuffered_read: Synchronously read data blocks dg_unbuffered_read(2)
file/ dg_unbuffered_write: Synchronously write data to a dg_unbuffered_write(2)
interpreter) having a C-like syntax /a shell (command .. csh(1)
administration program sysadm: menu-driven system . sysadm(1M)
console pseudo-device syscon: DG/UX operating system syscon(7)
system variables. sysconf: Get configurable .. sysconf(2)
definition sysdef: output system ...... sysdef(1M)
error messages perror, errno, sys_errlist, sys_nerr: system perror(3C)
setlogmask: control system/ syslog, openlog, closelog, . syslog(3)
file for syslogd system log/ syslog.conf: configuration . syslog.conf(5)
syslogd: log systems messages syslogd(8)
/configuration file for syslogd system log daemon .. syslog.conf(5)
perror, errno, sys_errlist, sys_nerr: system error/ .... perror(3C)
sa1, sa2, sadc: system activity report package sar(1M)
sar: system activity reporter ... sar(1)
report process data and system activity /a command; timex(1)
sysadm: menu-driven system administration program sysadm(1M)
dump2: incremental file system backup .............. dump2(1M)
daily/weekly DG/UX system file system backup /tapesave: .. filesave(1M)
blocks from a file without system buffering /read data dg_unbuffered_read(2)
/write data to a file without system buffering ........... dg_unbuffered_write(2)
stat: data returned by stat system call ................ stat(5)
intro: introduction to system calls and error numbers intro(2)
exercise link and unlink system calls link, unlink: link(1M)
shutdown: shut down system, change system state shutdown(1M)
allow synchronization of the system clock /the time to . adjtime(2)
uux: UNIX-to-UNIX system command execution ... uux(1)
config: configure a system ..................... config(1M)
interactive/ fsck: DG/UX file system consistency check and fsck(1M)
syscon: DG/UX operating system console pseudo-device syscon(7)
uulog, uuname: UNIX-to-UNIX system copy uucp, ......... uucp(1)
what to do when the DG/UX System crashes crash: ..... crash(8)
cu: call another UNIX system ..................... cu(1)
types: primitive system data types .......... types(5)
dg_fsdb: DG/UX file system debugger ............ dg_fsdb(1M)
Licensed material--property of copyright holder(s) Page 77
index(0) DG/UX 4.30 index(0)
fsdb: file system debugger ............ fsdb(1M)
sysdef: output system definition .......... sysdef(1M)
/format of DGC AViiON computer system description file .... system(4)
/endmntent, hasmntopt: get file system descriptor file entry getmntent(3)
/specify additional DG/UX System device for paging ... swapon(1M)
ustat: Get file system device statistics. .. ustat(2)
umount: Remove a file system device. ............. umount(2)
dg_mount: Mount a file system. .................... dg_mount(2)
dump: incremental file system dump ................ dump(1M)
errno, sys_errlist, sys_nerr: system error messages perror, perror(3C)
uupick: public UNIX-to-UNIX system file copy uuto, .... uuto(1)
/tapesave: daily/weekly DG/UX system file system backup .. filesave(1M)
fs: file system format .............. fs(4)
computer system description/ system: format of DGC AViiON system(4)
about a mounted file system. /Get information .. fstatfs(2)
file in/ ldsyshread: read the system header of an executable ldsyshread(3X)
hier: DG/UX file system hierarchy ........... hier(5)
systemid: display the unique system identifier .......... systemid(1M)
crash: examine system images .............. crash(1M)
entry dirent: file system independent directory dirent(4)
the caller with certain system information. /supplies dg_sys_info(2)
dumpfs: dump DG/UX file system information ......... dumpfs(1M)
/get exported file system information ......... exportent(3)
/disk and memory resident file system information. ........ sync(2)
system: issue a shell command system(3S)
AViiON 300 series workstation system keyboard kbd: ...... kbd(7)
/configuration file for syslogd system log daemon .......... syslog.conf(5)
logger: make entries in the system log ................. logger(1)
closelog, setlogmask: control system log syslog, openlog, syslog(3)
configure the LP spooling system lpadmin: ........... lpadmin(1M)
interactive message processing system mailx: ............. mailx(1)
and/ intro: introduction to system maintenance commands intro(1M)
intro: introduction to system maintenance procedures intro(8)
mem: main system memory .............. mem(7)
mfs: memory file system ..................... mfs(4)
mkfs, newfs: create a file system ..................... mkfs(1M)
mount: Mount a file system. .................... mount(2)
dg_mknod: Create a file system node. ............... dg_mknod(2)
filesystem: file system organization ........ filesystem(7)
getpagesize: Get the system page size. .......... getpagesize(2)
vipw: edit the DG/UX System password file ....... vipw(1M)
halt: stop the DG/UX System processor ........... halt(1M)
reboot: Reboot halts the system processor(s). ....... reboot(2)
prf: DG/UX operating system profiler ............ prf(7)
prfpr: DG/UX operating system profiler /prfsnap, . profiler(1M)
limits. getrlimit: Get system resource consumption getrlimit(2)
limits. setrlimit: Set system resource consumption setrlimit(2)
vlimit: control maximum system resource consumption vlimit(3C)
restore a DG/UX file system restore: incrementally restore(1M)
intro: introduction to DG/UX System special files ....... intro(7)
shut down system, change system state shutdown: .... shutdown(1M)
about a mounted file system. /Get information .. statfs(2)
Licensed material--property of copyright holder(s) Page 78
index(0) DG/UX 4.30 index(0)
mnttab: mounted file system table in DG/UX ...... mnttab(4)
time: Get system time. ............... time(2)
timezone: set default system time zone ........... timezone(4)
tune an existing DG/UX file system tunefs: ............ tunefs(1M)
print name of current DG/UX system uname: ............. uname(1)
Get name of current UNIX system. uname: ............ uname(2)
transport program for the uucp system uucico: file ....... uucico(1M)
sysconf: Get configurable system variables. .......... sysconf(2)
who: who is on the system ..................... who(1)
Uutry: try to contact remote system with debugging on ... uutry(1M)
system identifier systemid: display the unique systemid(1M)
/Returns information about the system's currently active/ . dg_process_info(2)
static information about file systems fstab: ............ fstab(4)
syslogd: log systems messages ........... syslogd(8)
checklist: list of file systems processed by fsck and/ checklist(4)
super-blocks of mounted file systems /update the ....... update(1M)
volcopy, labelit: copy file systems with label checking volcopy(1M)
login name of the user sysv3_cuserid: get character sysv3_cuserid(3S)
binary search a sorted table bsearch: ............ bsearch(3C)
name for object file symbol table entry /retrieve symbol ldgetname(3X)
/compute index of symbol table entry of an object file ldtbindex(3X)
/read an indexed symbol table entry of an object file ldtbread(3X)
dumptab: tape table file for ............. dumptab(4)
common object file symbol table format syms: ........ syms(4)
mnttab: mounted file system table in DG/UX ............. mnttab(4)
ldtbseek: seek to the symbol table of an object file .... ldtbseek(3X)
setmnt: establish mount table ...................... setmnt(1M)
classification and conversion tables /generate character chrtbl(1M)
neqn: format mathematical tables for nroff ........... neqn(1)
nterm: terminal driving tables for nroff ........... nterm(5)
tbl: format tables for nroff or troff .. tbl(1)
hdestroy: manage hash search tables hsearch, hcreate, .. hsearch(3)
tabs: set tabs on a terminal ......... tabs(1)
tabs: set tabs on a terminal tabs(1)
request t_accept: accept a connect . t_accept(3N)
labeled tape taccess: initiate access to taccess(1)
ctags: create a tags file .................. ctags(1)
a file tail: deliver the last part of tail(1)
structure t_alloc: allocate a library t_alloc(3N)
trig: sin, cos, tan, asin, acos, atan, atan2:/ trig(3M)
sinh, cosh, tanh: hyperbolic functions . sinh(3M)
tar: tape archiver .............. tar(1)
tsniff: summary report of tape contents .............. tsniff(1)
rmt: start the remote mag tape daemon ................ rmt(1M)
wmtd: start the WORM magnetic tape device server ......... wmtd(1M)
recover files from a backup tape frec: ................ frec(1M)
character special magnetic tape interface rmt: ....... rmt(7)
mt: magnetic tape manipulating program .. mt(1)
st: AViiON family tape subsystem ............. st(7)
dumptab: tape table file for ........ dumptab(4)
initiate access to labeled tape taccess: ............. taccess(1)
tposn: position tape to specified file ..... tposn(1)
Licensed material--property of copyright holder(s) Page 79
index(0) DG/UX 4.30 index(0)
tread: read file(s) from tape ....................... tread(1)
terminate access to a tape trelease: ............ trelease(1)
twrite: writes a file to tape ....................... twrite(1)
tlabel: initialize a tape with a volume label ... tlabel(1)
optical device) as magnetic tape /Once Read Multiple .. wmt(7)
read and write labels for dump tapes dump2label: ......... dump2label(1M)
and writing IBM and ANSI tapes /commands for reading reelexchange_intro(1)
system file system/ filesave, tapesave: daily/weekly DG/UX filesave(1M)
tar: tape archiver ......... tar(1)
development environment target /to reset software . sde-target(1)
programs for simple lexical tasks lex: generate ....... lex(1)
transport endpoint t_bind: bind an address to a t_bind(3N)
deroff: remove nroff/troff, tbl, and eqn constructs .... deroff(1)
with mm macros, eqn or tbl /documents formatted .. checkmm(1)
or troff tbl: format tables for nroff tbl(1)
control/ tcsendbreak, tcdrain, tcflush, tcflow: Line tcflush(3)
tcsendbreak, tcdrain, tcflush, tcflow: Line control/ ...... tcflush(3)
tcsendbreak, tcdrain, tcflush, tcflow: Line control/ tcflush(3)
set state. tcgetattr, tcsetattr: Get and tcsetattr(3)
process group ID. tcgetpgrp: Get foreground .. tcgetpgrp(3)
controller devices tcload: load terminal ...... tcload(1M)
endpoint t_close: close a transport . t_close(3N)
connection with another/ t_connect: establish a ..... t_connect(3N)
tcflow: Line control/ tcsendbreak, tcdrain, tcflush, tcflush(3)
tcgetattr, tcsetattr: Get and set state. tcsetattr(3)
process group ID. tcsetpgrp: Set foreground .. tcsetpgrp(3)
search trees tsearch, tfind, tdelete, twalk: manage binary tsearch(3)
record translation settings tdisplay: display label and tdisplay(1)
tee: pipe fitting .......... tee(1)
state reset: reset the teletype bits to a sensible reset(1)
last logins of users and teletypes last: indicate .. last(1)
initialization init, telinit: process control ... init(1M)
directory: opendir, readdir, telldir, seekdir, rewinddir,/ directory(3X)
temporary file tmpnam, tempnam: create a name for a tmpnam(3S)
tmpfile: create a temporary file ............. tmpfile(3S)
tempnam: create a name for a temporary file tmpnam, .... tmpnam(3S)
terminfo/ chgtinfo: create a temporary version of a ..... chgtinfo(1)
terminals term: conventional names for term(5)
terminfo/ captoinfo: convert a termcap description into a . captoinfo(1M)
data base termcap: terminal capability termcap(5)
capability database terminfo: terminal and printer ....... terminfo(4)
set the options for a terminal att_stty: ........ att_stty(1)
termcap: terminal capability data base termcap(5)
tcload: load terminal controller devices tcload(1M)
ct: spawn getty to a remote terminal ................... ct(1)
ctermid: generate filename for terminal ................... ctermid(3S)
nroff nterm: terminal driving tables for nterm(5)
/tgetstr, tgoto, tputs: terminal independent operation/ termcap(3X)
termio: AT&T terminal interface ......... termio(7)
tty: BSD terminal interface ......... tty(7)
dial: establish an out-going terminal line connection ... dial(3C)
mapping of AT&T and Berkeley terminal modes modemap: ... modemap(7)
Licensed material--property of copyright holder(s) Page 80
index(0) DG/UX 4.30 index(0)
berk_stty: set terminal options ........... berk_stty(1)
devtty: control terminal pseudo-device ..... devtty(7)
clear: clear terminal screen ............ clear(1)
optimization package curses: terminal screen handling and curses(3X)
script: make typescript of a terminal session ........... script(1G)
getty gettydefs: speed and terminal settings used by .. gettydefs(4)
stty: set the options for a terminal ................... stty(1)
tabs: set tabs on a terminal ................... tabs(1)
tty: get the name of the terminal ................... tty(1)
isatty: find name of a terminal ttyname, ......... ttyname(3C)
and line/ getty: set terminal type, modes, speed, getty(1M)
and line/ uugetty: set terminal type, modes, speed, uugetty(1M)
hang up the current control terminal. vhangup: Virtually vhangup(2)
file perusal filter for CRT terminals in DG/UX pg: .... pg(1)
term: conventional names for terminals .................. term(5)
_exit: Terminate a process. ....... _exit(2)
kill: terminate a process ........ kill(1)
trelease: terminate access to a tape . trelease(1)
exit: Flush buffers and terminate the process/ ..... exit(3C)
for child process to stop or terminate. wait3: Wait .... wait3(2)
child process to stop or terminate. /for the specified wait4(2)
atexit: register termination routine ........ atexit(3C)
waitpid: Wait for process termination. wait, ........ wait(2)
tic: terminfo compiler .......... tic(1M)
tput: query terminfo database .......... tput(1)
a termcap description into a terminfo description /convert captoinfo(1M)
infocmp: compare or print out terminfo descriptions ...... infocmp(1M)
a temporary version of a terminfo entry /create .... chgtinfo(1)
capability database terminfo: terminal and printer terminfo(4)
interface termio: AT&T terminal ...... termio(7)
definitions of common terms and symbols glossary: glossary(1)
t_error: produce error message t_error(3N)
command test: condition evaluation . test(1)
isnan, isnand, isnanf: test for floating-point NaN/ isnan(3C)
ed, red: text editor ................ ed(1)
ex: text editor ................ ex(1)
casual users) edit: text editor (variant of ex for edit(1)
change the format of a text file newform: ........ newform(1)
fspec: format specification in text files ................. fspec(4)
mathematical equations in text for troff eqn: format eqn(1)
typesetting troff: text formatting and ........ troff(1)
ms: text formatting macros ..... ms(5)
nroff: format text ....................... nroff(1)
plock: Lock data, text, or both into memory. . plock(2)
binary search trees tsearch, tfind, tdelete, twalk: manage tsearch(3)
structure t_free: free a library ..... t_free(3N)
tgetstr, tgoto, tputs:/ tgetent, tgetnum, tgetflag, termcap(3X)
tputs:/ tgetent, tgetnum, tgetflag, tgetstr, tgoto, .. termcap(3X)
protocol-specific service/ t_getinfo: get ............. t_getinfo(3N)
tgoto, tputs:/ tgetent, tgetnum, tgetflag, tgetstr, termcap(3X)
state t_getstate: get the current t_getstate(3N)
tgetent, tgetnum, tgetflag, tgetstr, tgoto, tputs:/ .... termcap(3X)
Licensed material--property of copyright holder(s) Page 81
index(0) DG/UX 4.30 index(0)
/tgetnum, tgetflag, tgetstr, tgoto, tputs: terminal/ .... termcap(3X)
merge: three-way file merge ....... merge(1)
tic: terminfo compiler ..... tic(1M)
data and system/ timex: time a command; report process timex(1)
time: time a command ............. time(1)
DG/UX commands at a later time at, batch: execute ... at(1)
strftime, tzset: date and time conversions /mktime, . ctime(3C)
ftime: get date and time ....................... ftime(3C)
time: Get system time. ..... time(2)
gettimeofday: Get date and time. ...................... gettimeofday(2)
up an environment at login time profile: setting ..... profile(4)
profil: Set up execution time profiling for this/ ... profil(2)
rtime: get remote time ....................... rtime(3N)
settimeofday: Set date and time. ...................... settimeofday(2)
stime: Set time. ...................... stime(2)
time: time a command ....... time(1)
time: Get system time. ...................... time(2)
of the/ adjtime: correct the time to allow synchronization adjtime(2)
clock: report CPU time used .................. clock(3C)
zic: time zone compiler ......... zic(1M)
zdump: time zone dumper ........... zdump(1M)
timezone: set default system time zone .................. timezone(4)
state of one of the interval timers /get the current ... getitimer(2)
Sets one of the interval timers. setitimer: ........ setitimer(2)
process times. times: Get process and child times(2)
update access and modification times of a file touch: .... touch(1)
Get process and child process times. times: ............. times(2)
file access and modification times. utime: Set ......... utime(2)
file access and modification times utimes: set ......... utimes(2)
process data and system/ timex: time a command; report timex(1)
time zone timezone: set default system timezone(4)
translation parameters tkey: set label and data ... tkey(1)
a volume label tlabel: initialize a tape with tlabel(1)
request t_listen: listen for a connect t_listen(3N)
event on a transport endpoint t_look: look at the current t_look(3N)
file tmpfile: create a temporary tmpfile(3S)
for a temporary file tmpnam, tempnam: create a name tmpnam(3S)
/isascii, tolower, toupper, toascii, _tolower, _toupper,/ ctype(3C)
popen, pclose: initiate pipe to/from a process .......... popen(3S)
tolower, toupper, toascii, _tolower, _toupper,/ /isascii, ctype(3C)
/isprint, isgraph, isascii, tolower, toupper, toascii,/ ctype(3C)
endpoint t_open: establish a transport t_open(3N)
tsort: topological sort ........... tsort(1)
a transport endpoint t_optmgmt: manage options for t_optmgmt(3N)
acctmerg: merge or add total accounting files ..... acctmerg(1M)
modification times of a file touch: update access and ... touch(1)
/toupper, toascii, _tolower, _toupper, setchrclass:/ .... ctype(3C)
/isgraph, isascii, tolower, toupper, toascii, _tolower,/ ctype(3C)
specified file tposn: position tape to .... tposn(1)
tput: query terminfo database tput(1)
/tgetflag, tgetstr, tgoto, tputs: terminal independent/ termcap(3X)
tr: translate characters ... tr(1)
Licensed material--property of copyright holder(s) Page 82
index(0) DG/UX 4.30 index(0)
dg_xtrace: extended process trace ...................... dg_xtrace(2)
strace: print STREAMS trace messages ............. strace(1M)
ptrace: Process trace. ..................... ptrace(2)
error logging and event tracing /interface to STREAMS log(7)
tr: translate characters ....... tr(1)
tkey: set label and data translation parameters ..... tkey(1)
/display label and record translation settings ....... tdisplay(1)
/a binary file for transmission via mail ...... uuencode(1)
t_bind: bind an address to a transport endpoint ......... t_bind(3N)
t_close: close a transport endpoint ......... t_close(3N)
look at the current event on a transport endpoint t_look: t_look(3N)
t_open: establish a transport endpoint ......... t_open(3N)
manage options for a transport endpoint t_optmgmt: t_optmgmt(3N)
t_unbind: disable a transport endpoint ......... t_unbind(3N)
t_sync: synchronize transport library .......... t_sync(3N)
system uucico: file transport program for the uucp uucico(1M)
scheduler for the uucp file transport program /the .... uusched(1M)
a connection with another transport user /establish . t_connect(3N)
expedited data sent over a/ t_rcv: receive data or ..... t_rcv(3N)
confirmation from a connect/ t_rcvconnect: receive the .. t_rcvconnect(3N)
from disconnect t_rcvdis: retrieve information t_rcvdis(3N)
of an orderly release/ t_rcvrel: acknowledge receipt t_rcvrel(3N)
unit t_rcvudata: receive a data . t_rcvudata(3N)
data error indication t_rcvuderr: receive a unit . t_rcvuderr(3N)
tread: read file(s) from tape tread(1)
ftw: walk a file tree ....................... ftw(3)
twalk: manage binary search trees /tfind, tdelete, .... tsearch(3)
a tape trelease: terminate access to trelease(1)
acos, atan, atan2:/ trig: sin, cos, tan, asin, trig(3M)
tan, asin, acos, atan, atan2: trigonometric functions /cos, trig(3M)
language troff: description of output troff(5)
equations in text for troff /format mathematical eqn(1)
files for device-independent troff font: description ... font(5)
typesetting viewgraphs/ mv: a troff macro package for .... mv(5)
simple pictures pic: troff preprocessor for drawing pic(1)
format tables for nroff or troff tbl: ................ tbl(1)
typesetting troff: text formatting and . troff(1)
values true, false: provide truth . true(1)
ftruncate: Truncate a file. ........... ftruncate(2)
length. truncate: Truncate a file to a specified truncate(2)
specified length. truncate: Truncate a file to a truncate(2)
pdp11, u3b, u3b5, vax: provide truth value about your/ /i386, machid(1)
true, false: provide truth values ............... true(1)
with debugging on Uutry: try to contact remote system uutry(1M)
twalk: manage binary search/ tsearch, tfind, tdelete, ... tsearch(3)
data over a connection t_snd: send data or expedited t_snd(3N)
disconnect request t_snddis: send user-initiated t_snddis(3N)
release t_sndrel: initiate an orderly t_sndrel(3N)
t_sndudata: send a data unit t_sndudata(3N)
contents tsniff: summary report of tape tsniff(1)
tsort: topological sort .... tsort(1)
library t_sync: synchronize transport t_sync(3N)
Licensed material--property of copyright holder(s) Page 83
index(0) DG/UX 4.30 index(0)
tty: BSD terminal interface tty(7)
terminal tty: get the name of the ... tty(1)
a terminal ttyname, isatty: find name of ttyname(3C)
utmp file of the current user ttyslot: find the slot in the ttyslot(3C)
endpoint t_unbind: disable a transport t_unbind(3N)
system tunefs: tune an existing DG/UX file tunefs(1M)
file system tunefs: tune an existing DG/UX tunefs(1M)
/prtacct, shutacct, startup, turnacct: shell procedures for/ acctsh(1M)
tsearch, tfind, tdelete, twalk: manage binary search/ tsearch(3)
bcmp: compare two areas of memory ........ bcmp(3C)
cmp: compare two files .................. cmp(1)
or reject lines common to two sorted files comm: select comm(1)
sccsdiff: compare two versions of an SCCS file sccsdiff(1)
twrite: writes a file to tape twrite(1)
file: determine file type ....................... file(1)
cat: concatenate and type files to standard output cat(1)
protocols, group or/ bcs_cat: type hosts, networks, passwd, bcs_cat(1M)
value about your processor type /u3b5, vax: provide truth machid(1)
getty: set terminal type, modes, speed, and line/ getty(1M)
uugetty: set terminal type, modes, speed, and line/ uugetty(1M)
types types: primitive system data types(5)
types: primitive system data types ...................... types(5)
session script: make typescript of a terminal ... script(1G)
mmt: typeset documents .......... mmt(1)
mvt: typeset view graphs and slides mvt(1)
troff: text formatting and typesetting ................ troff(1)
mv: a troff macro package for typesetting viewgraphs and/ mv(5)
/difftime, mktime, strftime, tzset: date and time/ ...... ctime(3C)
/m68k, m88k, i386, pdp11, u3b, u3b5, vax: provide truth/ machid(1)
/m68k, m88k, i386, pdp11, u3b, u3b5, vax: provide truth value/ machid(1)
getpw: get name from UID ........................ getpw(3)
ul: do underlining ......... ul(1)
limits. ulimit: Get and set user ... ulimit(2)
creation mask. umask: Set and get file .... umask(2)
mask umask: set file-creation mode umask(1)
filesystems mount, umount: mount and dismount . mount(1M)
device. umount: Remove a file system umount(2)
UNIX system. uname: Get name of current . uname(2)
DG/UX system uname: print name of current uname(1)
ul: do underlining ................ ul(1)
file unget: undo a previous get of an SCCS unget(1)
an SCCS file unget: undo a previous get of unget(1)
into input stream ungetc: push character back ungetc(3S)
a file uniq: report repeated lines in uniq(1)
mkstemp: make a unique file name ........... mkstemp(3C)
mktemp: make a unique file name ........... mktemp(3C)
host. gethostid: Get unique identifier of current gethostid(2)
host. sethostid: Set unique identifier of current sethostid(2)
systemid: display the unique system identifier ... systemid(1M)
t_rcvuderr: receive a unit data error indication . t_rcvuderr(3N)
t_rcvudata: receive a data unit ....................... t_rcvudata(3N)
t_sndudata: send a data unit ....................... t_sndudata(3N)
Licensed material--property of copyright holder(s) Page 84
index(0) DG/UX 4.30 index(0)
units: conversion program .. units(1)
cu: call another UNIX system ................ cu(1)
uname: Get name of current UNIX system. ............... uname(2)
communications within a host/ unix_ipc: piping ........... unix_ipc(6F)
execution uux: UNIX-to-UNIX system command uux(1)
uucp, uulog, uuname: UNIX-to-UNIX system copy ... uucp(1)
uuto, uupick: public UNIX-to-UNIX system file copy uuto(1)
unlink system calls link, unlink: exercise link and .. link(1M)
entry. unlink: Remove a directory . unlink(2)
unlink: exercise link and unlink system calls link, . link(1M)
mlockall, munlockall: lock or unlock address space ....... mlockall(3C)
mlock, munlock: lock (or unlock) pages in memory .... mlock(3C)
floating-point/ finite, unordered, copysign: IEEE .. ieeefp(3C)
files pack, pcat, unpack: compress and expand pack(1)
time profile: setting up an environment at login . profile(4)
for this process. profil: Set up execution time profiling profil(2)
vhangup: Virtually hang up the current control/ .... vhangup(2)
times of a file touch: update access and modification touch(1)
of programs make: maintain, update, and regenerate groups make(1)
lfind: linear search and update lsearch, ........... lsearch(3)
the super-blocks of mounted/ update: periodically update update(1M)
sync: update the super-block ..... sync(1M)
mounted/ update: periodically update the super-blocks of . update(1M)
signal: Specify what to do upon presentation of a signal. signal(2)
sigset: Specify what to do upon presentation of a signal. sigset(2)
sigvec: Specify what to do upon presentation of a signal. sigvec(2)
du: summarize disk usage ...................... du(1)
a command description and usage examples /retrieve .. usage(1)
dg_file_info: return file usage information for a/ ... dg_file_info(2)
description and usage/ usage: retrieve a command .. usage(1)
get information about resource usage vtimes: ............. vtimes(3C)
speed and terminal settings used by getty gettydefs: .. gettydefs(4)
clock: report CPU time used ....................... clock(3C)
prime/ /accounting information used to distinguish between holidays(4)
id: print user and group IDs and names id(1)
crontab: user crontab file in DG/UX . crontab(1)
environ: user environment ........... environ(5)
file. chown: Change user id and group id of a .. chown(2)
file. fchown: Change user id and group id of a .. fchown(2)
disk accounting data by user id diskusg: generate . diskusg(1M)
ulimit: Get and set user limits. ............... ulimit(2)
logname: return login name of user ....................... logname(3X)
current/ cuserid: get the user name associated with the cuserid(3S)
become super-user or another user su: .................. su(1)
character login name of the user sysv3_cuserid: get ... sysv3_cuserid(3S)
with another transport user /establish a connection t_connect(3N)
the utmp file of the current user /find the slot in .... ttyslot(3C)
write: write to another user ....................... write(1)
svcfd_create, svcudp_create, user2netname,/ /svctcp_create, rpc(3N)
request t_snddis: send user-initiated disconnect .. t_snddis(3N)
last: indicate last logins of users and teletypes ........ last(1)
(variant of ex for casual users) edit: text editor .. edit(1)
Licensed material--property of copyright holder(s) Page 85
index(0) DG/UX 4.30 index(0)
mail, rmail: send mail to users or read mail ......... mail(1)
information for beginning users starter: ............ starter(1)
wall: write to all users ...................... wall(1M)
a program file for csh(1) users which: locate ....... which(1)
fuser: identify processes using a file or file structure fuser(1M)
locate: identify a command using keywords ............. locate(1)
/convert formatted input using varargs argument list vscanf(3S)
statistics. ustat: Get file system device ustat(2)
Get information about resource utilization. getrusage: ... getrusage(2)
modification times. utime: Set file access and . utime(2)
modification times utimes: set file access and utimes(2)
utmp, wtmp: utmp and wtmp entry formats utmp(4)
endutent, utmpname: access utmp file entry /setutent, getut(3)
ttyslot: find the slot in the utmp file of the current user ttyslot(3C)
entry formats utmp, wtmp: utmp and wtmp .. utmp(4)
/pututline, setutent, endutent, utmpname: access utmp file/ getut(3)
directories and permissions/ uucheck: check the uucp .... uucheck(1M)
for the uucp system uucico: file transport program uucico(1M)
directory clean-up uucleanup: uucp spool ...... uucleanup(1M)
uucheck: check the uucp directories and/ ...... uucheck(1M)
uusched: the scheduler for the uucp file transport program uusched(1M)
uucleanup: uucp spool directory clean-up uucleanup(1M)
control uustat: uucp status inquiry and job uustat(1)
file transport program for the uucp system uucico: ....... uucico(1M)
UNIX-to-UNIX system copy uucp, uulog, uuname: ....... uucp(1)
binary file for/ uuencode, uudecode: encode/decode a .. uuencode(1)
encode/decode a binary file/ uuencode, uudecode: ........ uuencode(1)
modes, speed, and line/ uugetty: set terminal type, uugetty(1M)
system copy uucp, uulog, uuname: UNIX-to-UNIX uucp(1)
copy uucp, uulog, uuname: UNIX-to-UNIX system uucp(1)
system file copy uuto, uupick: public UNIX-to-UNIX uuto(1)
uucp file transport program uusched: the scheduler for the uusched(1M)
and job control uustat: uucp status inquiry uustat(1)
UNIX-to-UNIX system file copy uuto, uupick: public ....... uuto(1)
system with debugging on Uutry: try to contact remote uutry(1M)
command execution uux: UNIX-to-UNIX system ... uux(1)
requests uuxqt: execute remote command uuxqt(1M)
val: validate SCCS file .... val(1)
val: validate SCCS file ......... val(1)
allocator in DG/UX valloc: aligned memory ..... valloc(3)
/u3b, u3b5, vax: provide truth value about your processor/ machid(1)
labs: return integer absolute value abs, ................ abs(3C)
getenv: return value for environment name . getenv(3C)
ceiling, remainder, absolute value functions /fabs: floor, floor(3M)
putenv: change or add value to environment ....... putenv(3)
/htons, ntohl, ntohs: convert values between host and/ ... byteorder(3N)
values values: machine-dependent .. values(5)
true, false: provide truth values ..................... true(1)
values: machine-dependent values ..................... values(5)
/print formatted output of a varargs argument list ...... vprintf(3S)
/convert formatted input using varargs argument list ...... vscanf(3S)
argument list varargs: handle variable ... varargs(5)
Licensed material--property of copyright holder(s) Page 86
index(0) DG/UX 4.30 index(0)
varargs: handle variable argument list ..... varargs(5)
Get configurable pathname variables. /fpathconf: .... pathconf(2)
Get configurable system variables. sysconf: ....... sysconf(2)
users) edit: text editor (variant of ex for casual .. edit(1)
/m88k, i386, pdp11, u3b, u3b5, vax: provide truth value about/ machid(1)
vc: version control ........ vc(1)
option letter from argument vector getopt: get ........ getopt(3)
(visual) display editor/ vi, vedit, view: screen-oriented vi(1)
assert: verify program assertion ... assert(3X)
vc: version control ............ vc(1)
chgtinfo: create a temporary version of a terminfo entry chgtinfo(1)
get: get a version of an SCCS file .... get(1)
sccsdiff: compare two versions of an SCCS file ... sccsdiff(1)
virtual memory efficient way. vfork: Spawn new process in a vfork(2)
formatted output of/ vprintf, vfprintf, vsprintf: print .. vprintf(3S)
formatted input using/ vscanf, vfscanf, vsscanf: convert .. vscanf(3S)
current control terminal. vhangup: Virtually hang up the vhangup(2)
screen-oriented (visual)/ vi, vedit, view: ........... vi(1)
a binary file for transmission via mail /encode/decode ... uuencode(1)
available for mounting via NFS. /Make a directory exportfs(2)
mvt: typeset view graphs and slides ..... mvt(1)
display editor/ vi, vedit, view: screen-oriented (visual) vi(1)
a control/ cpd: change or view the allocation limits for cpd(1)
macro package for typesetting viewgraphs and slides /a troff mv(5)
file perusal filter for CRT viewing more, page: ....... more(1)
password file vipw: edit the DG/UX System vipw(1M)
vfork: Spawn new process in a virtual memory efficient way. vfork(2)
control terminal. vhangup: Virtually hang up the current vhangup(2)
/vedit, view: screen-oriented (visual) display editor based/ vi(1)
resource consumption vlimit: control maximum system vlimit(3C)
systems with label checking volcopy, labelit: copy file volcopy(1M)
initialize a tape with a volume label tlabel: ...... tlabel(1)
print formatted output of a/ vprintf, vfprintf, vsprintf: vprintf(3S)
convert formatted input using/ vscanf, vfscanf, vsscanf: .. vscanf(3S)
output of/ vprintf, vfprintf, vsprintf: print formatted .. vprintf(3S)
input using/ vscanf, vfscanf, vsscanf: convert formatted . vscanf(3S)
resource usage vtimes: get information about vtimes(3C)
process wait: await completion of .. wait(1)
sigsuspend: Wait for a signal. ......... sigsuspend(2)
or terminate. wait3: Wait for child process to stop wait3(2)
select: Wait for I/O conditions. ... select(2)
lock requests/ dg_lock_wait: Wait for previously delayed dg_lock_wait(2)
wait, waitpid: Wait for process termination. wait(2)
process to stop or/ wait4: Wait for the specified child wait4(2)
process termination. wait, waitpid: Wait for .... wait(2)
to stop or terminate. wait3: Wait for child process wait3(2)
child process to stop or/ wait4: Wait for the specified wait4(2)
termination. wait, waitpid: Wait for process .. wait(2)
ftw: walk a file tree ........... ftw(3)
wall: write to all users ... wall(1M)
in a virtual memory efficient way. vfork: Spawn new process vfork(2)
wc: word count ............. wc(1)
Licensed material--property of copyright holder(s) Page 87
index(0) DG/UX 4.30 index(0)
/mbtowc, wctomb, mbstowcs, wcstombs: multibyte operations multibyte(3C)
multibyte/ mblen, mbtowc, wctomb, mbstowcs, wcstombs: multibyte(3C)
what: identify SCCS files .. what(1)
of a signal. signal: Specify what to do upon presentation signal(2)
of a signal. sigset: Specify what to do upon presentation sigset(2)
of a signal. sigvec: Specify what to do upon presentation sigvec(2)
System crashes crash: what to do when the DG/UX .. crash(8)
whodo: who is doing what ....................... whodo(1M)
crash: what to do when the DG/UX System crashes crash(8)
binary, and or manual for/ whereis: locate source, .... whereis(1)
exist on open/ poll: Check whether certain conditions . poll(2)
for csh(1) users which: locate a program file which(1)
whodo: who is doing what .......... whodo(1M)
who: who is on the system ....... who(1)
who: who is on the system .. who(1)
whodo: who is doing what ... whodo(1M)
fold long lines for finite width output device fold: . fold(1)
prof: profile within a function .......... prof(5)
/piping communications within a host in DG/UX ..... unix_ipc(6F)
string. swab: Swap the bytes within each pair of bytes in a swab(3C)
/read data blocks from a file without system buffering ... dg_unbuffered_read(2)
/write data to a file without system buffering ... dg_unbuffered_write(2)
Read Multiple optical device)/ wmt: pseudo WORM (Write Once wmt(7)
tape device server wmtd: start the WORM magnetic wmtd(1M)
wc: word count ................. wc(1)
fgetc, getw: get character or word from a stream /getchar, getc(3S)
fputc, putw: put character or word on a stream /putchar, putc(3S)
hyphen: find hyphenated words ...................... hyphen(1)
cd: change working directory .......... cd(1)
get pathname of current working directory getcwd: . getcwd(3C)
pwd: print working directory name ..... pwd(1)
calling/ chdir: Change the working directory of the ... chdir(2)
getwd: get current working directory pathname . getwd(3)
grfx: AViiON 300 series workstation graphics processor grfx(7)
kbd: AViiON 300 series workstation system keyboard kbd(7)
server wmtd: start the WORM magnetic tape device .. wmtd(1M)
optical device)/ wmt: pseudo WORM (Write Once Read Multiple wmt(7)
system/ /Synchronously write data to a file without dg_unbuffered_write(2)
dump2label: read and write labels for dump tapes dump2label(1M)
writev: Write on a file. ........... writev(2)
optical/ wmt: pseudo WORM (Write Once Read Multiple .. wmt(7)
DG/UX putpwent: write password file entry in putpwent(3)
wall: write to all users ......... wall(1M)
write: Write to an object. ........ write(2)
write: write to another user ...... write(1)
write: Write to an object. . write(2)
write: write to another user write(1)
twrite: writes a file to tape ...... twrite(1)
writev: Write on a file. ... writev(2)
/commands for reading and writing IBM and ANSI tapes . reelexchange_intro(1)
open: open for reading or writing .................... open(2)
utmp, wtmp: utmp and wtmp entry formats ......... utmp(4)
Licensed material--property of copyright holder(s) Page 88
index(0) DG/UX 4.30 index(0)
formats utmp, wtmp: utmp and wtmp entry .. utmp(4)
accounting records fwtmp, wtmpfix: manipulate connect fwtmp(1M)
list(s) and execute command xargs: construct argument .. xargs(1)
/svcudp_create, user2netname, xdr_accepted_reply,/ ....... rpc(3N)
xdr_bytes, xdr_char,/ xdr_array, xdr_bool, ....... xdr(3N)
/xdr_accepted_reply, xdr_authunix_parms,/ ....... rpc(3N)
xdr_destroy,/ xdr_array, xdr_bool, xdr_bytes, xdr_char, xdr(3N)
xdr_array, xdr_bool, xdr_bytes, xdr_char,/ ...... xdr(3N)
/xdr_authunix_parms, xdr_callhdr, xdr_callmsg,/ . rpc(3N)
xdr_pmap,/ /xdr_callhdr, xdr_callmsg, xdr_opaque_auth, rpc(3N)
/xdr_bool, xdr_bytes, xdr_char, xdr_destroy,/ .... xdr(3N)
/xdr_bool, xdr_bytes, xdr_char, xdr_destroy, xdr_double,/ .. xdr(3N)
/xdr_char, xdr_destroy, xdr_double, xdr_int, xdr_long,/ xdr(3N)
xdr_destroy, xdr_double, xdr_int, xdr_long,/ /xdr_char, xdr(3N)
/xdr_double, xdr_int, xdr_long, xdrmem_create,/ .. xdr(3N)
/xdr_double, xdr_int, xdr_long, xdrmem_create, xdr_opaque,/ xdr(3N)
/xdr_long, xdrmem_create, xdr_opaque, xdr_pointer,/ .. xdr(3N)
/xdr_callhdr, xdr_callmsg, xdr_opaque_auth, xdr_pmap,/ rpc(3N)
/xdr_callmsg, xdr_opaque_auth, xdr_pmap, xdr_pmaplist,/ ... rpc(3N)
xdr_opaque_auth, xdr_pmap, xdr_pmaplist,/ /xdr_callmsg, rpc(3N)
/xdrmem_create, xdr_opaque, xdr_pointer, xdrrec_create,/ xdr(3N)
xdr_opaque, xdr_pointer, xdrrec_create,/ /xdrmem_create, xdr(3N)
/xdr_pointer, xdrrec_create, xdrrec_endofrecord,/ ....... xdr(3N)
/xdrrec_endofrecord, xdrrec_eof, xdrrec_skiprecord,/ xdr(3N)
xdr_reference,/ /xdrrec_eof, xdrrec_skiprecord, ......... xdr(3N)
/xdrrec_eof, xdrrec_skiprecord, xdr_reference, xdr_setpos,/ xdr(3N)
/xdr_pmap, xdr_pmaplist, xdr_rejected_reply,/ ....... rpc(3N)
/xdr_rejected_reply, xdr_replymsg, xprt_register,/ rpc(3N)
/xdr_reference, xdr_setpos, xdr_short,/ .... xdr(3N)
/xdr_reference, xdr_setpos, xdr_short, xdrstdio_create,/ xdr(3N)
/xdr_setpos, xdr_short, xdrstdio_create, xdr_string,/ xdr(3N)
/xdr_short, xdrstdio_create, xdr_string, xdr_u_char,/ ... xdr(3N)
/xdrstdio_create, xdr_string, xdr_u_char, xdr_u_int,/ .... xdr(3N)
/xdr_string, xdr_u_char, xdr_u_int, xdr_u_long,/ .... xdr(3N)
/xdr_u_char, xdr_u_int, xdr_u_long, xdr_u_short,/ .. xdr(3N)
/xdr_u_long, xdr_u_short, xdr_union, xdr_vector,/ .... xdr(3N)
/xdr_u_int, xdr_u_long, xdr_u_short, xdr_union,/ ... xdr(3N)
/xdr_u_short, xdr_union, xdr_vector, xdr_void,/ ..... xdr(3N)
/xdr_union, xdr_vector, xdr_void, xdr_wrapstring:/ . xdr(3N)
/xdr_vector, xdr_void, xdr_wrapstring: library/ ... xdr(3N)
/xdr_replymsg, xprt_register,/ ............ rpc(3N)
/xdr_replymsg, xprt_register, xprt_unregister: library/ .. rpc(3N)
programs to implement shared/ xstr: extract strings from C xstr(1)
j0, j1, jn, y0, y1, yn: Bessel functions bessel(3M)
j0, j1, jn, y0, y1, yn: Bessel functions ... bessel(3M)
compiler-compiler yacc: yet another .......... yacc(1)
/yperr_string, ypprot_err: Yellow Pages client interface ypclnt(3N)
j0, j1, jn, y0, y1, yn: Bessel functions ....... bessel(3M)
/yp_match, yp_first, yp_next, yp_all, yp_order, yp_master,/ ypclnt(3N)
ypclnt, yp_get_default_domain, yp_bind, yp_unbind, yp_match,/ ypclnt(3N)
yp_bind, yp_unbind, yp_match,/ ypclnt, yp_get_default_domain, ypclnt(3N)
/yp_all, yp_order, yp_master, yperr_string, ypprot_err:/ . ypclnt(3N)
Licensed material--property of copyright holder(s) Page 89
index(0) DG/UX 4.30 index(0)
/yp_bind, yp_unbind, yp_match, yp_first, yp_next, yp_all,/ ypclnt(3N)
yp_bind, yp_unbind,/ ypclnt, yp_get_default_domain, ..... ypclnt(3N)
/yp_next, yp_all, yp_order, yp_master, yperr_string,/ .. ypclnt(3N)
yp_all,/ /yp_bind, yp_unbind, yp_match, yp_first, yp_next, ypclnt(3N)
/yp_unbind, yp_match, yp_first, yp_next, yp_all, yp_order,/ ypclnt(3N)
/yp_first, yp_next, yp_all, yp_order, yp_master,/ ...... ypclnt(3N)
/yp_master, yperr_string, ypprot_err: Yellow Pages/ .. ypclnt(3N)
yp_next, yp_all,/ /yp_bind, yp_unbind, yp_match, yp_first, ypclnt(3N)
zdump: time zone dumper .... zdump(1M)
bzero: Zero a portion of memory. .. bzero(3C)
zic: time zone compiler .... zic(1M)
zic: time zone compiler .............. zic(1M)
zdump: time zone dumper ................ zdump(1M)
set default system time zone timezone: ............ timezone(4)
Licensed material--property of copyright holder(s) Page 90