Specifies that a conversion is to be performed between an Ultrix
  formatted file and a UCX database.  This conversion can be performed
  in both directions for the HOST and NETWORK databases; however, the
  conversion is limited to Ultrix formatted file to UCX database for
  the PROXY database.

  The CONVERT command must be used in conjunction with the /ULTRIX or
  /VMS qualifiers and these qualifier must immediately succeed CONVERT.
  There is no default for /ULTRIX or /VMS.

  Format:
  CONVERT/VMS Database_type  or  CONVERT/ULTRIX Database_type

Additional information available:

/ULTRIX/VMS

  Converts a UCX database to an Ultrix formatted file.

Additional information available:

HOSTNETWORK

  Converts a UCX$HOST database file to an Ultrix formatted
  /etc/hosts file (held on the VMS system).

  There is an optional parameter to the CONVERT/ULTRIX HOST
  command which specifies the name of the Ultrix formatted
  /etc/hosts file.  The default is []ETC.HOSTS.

  The UCX$HOST file name is defined in the logical name UCX$HOST.

  Format:
    CONVERT/ULTRIX HOST [file_name]

Additional information available:

/BYADDRESS/LOG/YP_FORMAT

  Specifies that an Ultrix formatted /etc/hosts file will be
  created with records sorted by internet address.

  If this qualifier is not specified, the file will be created
  with records sorted by host name

  Format:
    CONVERT/ULTRIX HOST [file_name] /BYADDRESS

  Specifies that records will be displayed to SYS$OUTPUT as
  they are being processed.

  The default is that records will not be displayed.

  Format:
    CONVERT/ULTRIX HOST [file_name] /[NO]LOG

  Specifies that the Ultrix formatted host database should be
  created in Yellow Pages format.

  Format:
    CONVERT/ULTRIX HOST [file_name] /[NO]YP

  Converts an Ultrix formatted /etc/networks file (held on the
  VMS system) to a UCX$NETWORK database.

  There is an optional parameter to the CONVERT/ULTRIX NETWORK
  command which specifies the name of the Ultrix formatted
  /etc/networks file.  The default is []ETC.NETWORKS.

  The UCX$NETWORK file name is defined in the logical name
  UCX$NETWORK.

  Format:
    CONVERT/ULTRIX NETWORK [file_name]

Additional information available:

/BYADDRESS/LOG/YP_FORMAT

  Specifies that an Ultrix formatted /etc/networks file will be
  created with records sorted by internet address.

  If this qualifier is not specified, the file will be created with
  records sorted by network name

  Format:
    CONVERT/ULTRIX NETWORK [file_name] /BYADDRESS

  Specifies that records will be displayed to SYS$OUTPUT as they
  are being processed.

  The default is that records will not be displayed.

  Format:
    CONVERT/ULTRIX NETWORK [file_name] /[NO]LOG

  Specifies that the Ultrix formatted network database should be
  created in Yellow Pages format.

  Format:
    CONVERT/ULTRIX NETWORK [file_name] /[NO]YP

  Converts an Ultrix formatted file to a UCX database.

  If the UCX database already contains records, the conversion
  will cause new information to be appended.

Additional information available:

HOSTNETWORKPROXY

  Converts an Ultrix formatted /etc/hosts file (held on the VMS
  system) to a UCX$HOST database.

  There is an optional parameter to the CONVERT/VMS HOST command
  which specifies the name of the Ultrix formatted /etc/hosts file.
  The default is []ETC.HOSTS.

  The UCX$HOST file name is defined in the logical name UCX$HOST.

  Format:
    CONVERT/VMS HOST [file_name]

Additional information available:

/LOG/UPCASE/YP_FORMAT

  Specifies that records will be displayed to SYS$OUTPUT as they
  are being processed.

  The default is that records will not be displayed.

  Format:
    CONVERT/VMS HOST [file_name] /[NO]LOG

  Specifies that an upcased alias host name will be created for
  each host name.

  The default is that upcased alias host name will not be created.

  Specifies that the Ultrix formatted host database is in
  Yellow Pages format.

  Format:
    CONVERT/ULTRIX HOST [file_name] /[NO]YP

  Converts an Ultrix formatted /etc/networks file (held on the VMS
  system) to a UCX$NETWORK database.

  There is an optional parameter to the CONVERT/VMS NETWORK command
  which specifies the name of the Ultrix formatted /etc/networks
  file.  The default is []ETC.NETWORKS.

  The UCX$NETWORK file name is defined in the logical name
  UCX$NETWORK.

  Format:
    CONVERT/VMS NETWORK [file_name]

Additional information available:

/LOG/UPCASE/YP_FORMAT

  Specifies that records will be displayed to SYS$OUTPUT as they
  are being processed.

  The default is that records will not be displayed.

  Format:
    CONVERT/VMS NETWORK [file_name] /[NO]LOG

  Specifies that an upcased alias network name will be created
  for each network name.

  The default is that upcased alias network name will not be created.

  Specifies that the Ultrix formatted network database is in
  Yellow Pages format.

  Format:
    CONVERT/ULTRIX NETWORK [file_name] /[NO]YP

  Converts an Ultrix formatted /etc/passwd file (held on the VMS
  system) to a UCX$PROXY database.

  There is an optional parameter to the CONVERT/VMS PROXY command
  which specifies the name of the Ultrix formatted /etc/passwd file.
  The default is []ETC.PASSWD.

  The UCX$PROXY file name is defined in the logical name
  UCX$PROXY.

  Format:
    CONVERT/VMS PROXY [file_name]

Additional information available:

/LOG

  Specifies that records will be displayed to SYS$OUTPUT as they
  are being processed.

  The default is that records will not be displayed.

  Format:
    CONVERT/VMS PROXY [file_name] /[NO]LOG