DEBUG DEFINE — VMS 5.1-B
The DEFINE command is used to abbreviate names or strings. The
command comes in several forms, depending on whether you want to
define an abbreviation for a program location, a value, or part
of a debugger command.
Format for /ADDRESS /COMMAND or /VALUE:
DEFINE [/qualifier] symbol=expression [,symbol=expression ...]
Format for /KEY:
DEFINE/KEY[/qualifier...] key-name expression
Additional information available:
/ADDRESS/COMMAND/KEY/LOCAL/VALUE
Examples
! In the following example we define a short name "X" for a
! program location whose name is long. Note that DEFINE/ADDRESS
! is the default, so we do not need to specify it here.
!
DBG> DEFINE X = ROUTINENAME\SUBROUTINENAME\VARNAME
DBG> EX X
ROUTINENAME\SUBROUTINENAME\VARNAME: 17
! The following abbreviates a debugger command.
!
DBG> DEF/COM Z = "STEP/SILENT; EX ARR[I]"
DBG> Z ! This now does the above command
! The following redefines the keypad key KP0
!
DBG> DEF/KEY/TERM/NOECHO KP0 "STEP/SILENT; EX ARR[I]"
Parameters
symbol
Specifies the name of the symbol to be defined. The symbol can
be composed of alphanumeric (A-Z and 0-9) characters and must not
start with a numeric.
For DEFINE/KEY, key-name must be the name of a keypad key.
expression
For DEFINE/ADDRESS, any address expression.
For DEFINE/COMMAND or DEFINE/KEY, any string enclosed in quotes
("). Quotes inside quotes must be doubled.
For DEFINE/VALUE, any language expression in the currently set
language.
Qualifiers
The define command allows the following qualifiers:
/ADDRESS - Define an abbreviation for an address.
/COMMAND - Define an abbreviation for a debugger command.
/KEY - Define a keypad key.
/VALUE - Define a name for a particular value.
/LOCAL - Defined symbol is local to the command procedure.
See the subtopics for more details on each of these. Further
qualifiers on DEFINE/KEY are documented in that subtopic.
/ADDRESS
This specifies that the expression is to be interpreted as an
address. The defined symbol can then be used anywhere that an
address expression is allowed, for example, in the EXAMINE
command, in the SET WATCH command, and so on. /ADDRESS is the
default.
Example:
DBG> DEFINE X = PROGRAM\VARNAME[4].COMPNAME
DBG> SET WATCH X
DBG> EXAM X
/COMMAND
This specifies that the expression is to be interpreted as a
string containing a debugger command. The defined symbol can
then be used as a debugger command, and it will be expanded into
the given string. You can also define just the initial portion
of a debugger command.
Example:
DBG> DEF/COM EB = "EXAM/BINARY/LONG "
DBG> EB Y
PROGRAM\Y: 11000111 00000000 10000001 01111110
/KEY
DEFINE/KEY equates a string to a keypad key. This command gives
the same capabilities as DEFINE/KEY in DCL, and has the same
syntax.
You must have mode set to "KEYPAD". Default definitions are
provided (see "HELP KEYPAD"). DEFINE/KEY lets you change the
default definitions.
Format:
DEFINE/KEY [/qualifiers] key-name "key-definition"
Examples
DBG> DEFINE/KEY/NOECHO/TERMINATE KP0 "STEP"
DBG> DEFINE/KEY/IF_STATE=GOLD KP1 "EXAMINE X"
Additional information available:
/ECHO/IF_STATE/LOCK_STATE/LOG/NOECHO/NOIF_STATE
/NOLOCK_STATE/NOLOG/NOSET_STATE/NOTERMINATE
/SET_STATE/TERMINATE
/ECHO
(Default) Specifies that the keypad definition be echoed on the
terminal when the key is used.
/IF_STATE=state-name
Specifies that the key definition applies only to that state.
So, for example, if the PF1 key sets you to "GOLD" state, and you
do
DEFINE/KEY/IF_STATE=GOLD KP0 "EXAMINE X"
then the sequence "PF1", "KP0" will expand to "EXAMINE X".
key-names
Key-name LK201 VT100-type VT52-type
PF1 PF1 PF1 PF1
PF2 PF2 PF2 PF2
PF3 PF3 PF3 PF3
PF4 PF4 PF4 PF4
KP0,...,KP9 0,1,...,9 0,1,...,9 0,1,...,9
PERIOD . . .
COMMA , , ,
MINUS - - -
ENTER Enter ENTER ENTER
UP ^ ^ ^
DOWN V V V
LEFT <- <- <-
RIGHT -> -> ->
E1 Find N/A N/A
E2 Insert Here N/A N/A
E3 Remove N/A N/A
E4 Select N/A N/A
E5 Prev Screen N/A N/A
E6 Next Screen N/A N/A
HELP Help N/A N/A
DO Do N/A N/A
F6,F7,...,F20 F6,F7,...,F20 N/A N/A
/LOCK_STATE
Specifies that the state set by the SET_STATE qualifier is to
remain the active state until explicitly changed.
/LOG
(Default) Controls whether the system displays a message
indicating that the key definition has been successfully created.
/NOECHO
Specifies that the keypad definition not be echoed on the
terminal when the key is used.
/NOIF_STATE
(Default) Specifies that the key is to be defined for the current
state only.
/NOLOCK_STATE
(Default) Specifies that the state transition specified by the
current key will only take effect until the next terminator
character is typed, or until the after the next function key is
pressed.
/NOLOG
Inhibits display of the message confirming the key definition.
/NOSET_STATE
(Default) Do not change the current state when the function key
being defined is entered.
/NOTERMINATE
(Default) Specifies that the key expansion does not terminate the
command.
/SET_STATE=state-name
Specifies that using the key has the effect of putting you into
the specified state when the key being defined is used.
/TERMINATE
Specifies that the keypad key terminates the command.
/LOCAL
Specifies that the symbol definition is local to the command
procedure and will go away when the command procedure is exited.
This qualifier is only valid for /ADDRESS, /COMMAND, and /VALUE.
/VALUE
Specifies that the expression is to be interpreted as a value in
the current language. The defined symbol can then be used
anywhere a value expression is allowed, such as in an EVALUATE
command.
Example:
! The following defines an abbreviation for a double-floating
number.
!
DBG> DEF/VAL F = 1.103763783D27
DBG> EVAL F + 1.0D27
2.103763783D27