This command enables the user to change any field(s) in the DEFAULT
 record in SYSUAF.DAT.

 Format:

        DEFAULT /qualifier [/qualifiers]

Additional information available:

Qualifiers

Additional information available:

/ACCESS/ACCOUNT/ASTLM/BATCH/BIOLM/BYTLM/CLI
/CLITABLES/CPUTIME/DEFPRIVILEGES/DEVICE/DIALUP
/DIOLM/DIRECTORY/ENQLM/EXPIRATION/FILLM
/FLAGS/GENERATE/INTERACTIVE/JTQUOTA/LGICMD
/LOCAL/MAXACCTJOBS/MAXDETACH/MAXJOBS/NETWORK
/OWNER/PFLAGS/PGFLQUOTA/P_RESTRICT/PRCLM
/PRIMEDAYS/PRIORITY/PRIVILEGES/PWDEXPIRED
/PWDLIFETIME/PWDMINIMUM/REMOTE/SFLAGS/S_RESTRICT
/SHRFILLM/TQELM/UIC/WSDEFAULT/WSEXTENT
/WSQUOTA

 /[NO]ACCESS=([PRIMARY], [n-m], [n] [,...] [SECONDARY], [n-m], [n] [,...])
 /[NO]ACCESS="[PRIMARY][:] [n-m][,] [n][,...][;] [SECONDARY][:] [n-m][,...]"

 Used to specify hours of access for all modes of logins.  Specify hours
 as integers from 0 to 23, inclusive. Hours may be specified as single
 hours (n), or as ranges of hours (n-m).  If the ending hour of a range
 is earlier than the starting hour, the range extends from the starting
 hour through midnight to the the ending hour.  The first set of hours
 after the keyword PRIMARY specifies hours on primary days; the second
 set of hours after the keyword SECONDARY specifies hours on secondary
 days.

 All the list elements are optional.  If no hours are specified for a
 day type, access is permitted the entire day.  If only primary hours
 or only secondary hours are given, no access is permitted for secondary
 or primary days, respectively.  If hours are given with no day type, they
 apply to both types of days.

 Negating the qualifier by specifying /NOACCESS=(...) completely inverts
 the sense of the access hours.

 Examples:

 /ACCESS                allows unrestricted access
 /NOACCESS=SECONDARY    allows access on primary days only
 /ACCESS=(9-17)         allows access from 9 am through 5 pm on all days
 /NOACCESS=(PRIMARY, 9-17, SECONDARY, 18-8)
                        allows access from 9 through 5 on secondary days
                        and all but 9 through 5 on primary days
 /ACCESS="Primary: 9-16; Secondary: 18-7, 8; Primary: 17"
                        allows access from 9 through 5 on primary days
                        and all but 9 through 5 on secondary days

 To specify access hours for specific types of logins, see the
 /BATCH, /NETWORK, /INTERACTIVE, /LOCAL, /DIALUP, and /REMOTE qualifiers.

 /ACCOUNT=account-name

 Specifies a default account name.  This field is often used for billing
 purposes, and should consist of 1 through 8 characters.

 /ASTLM=n

 Specifies the AST queue limit, which is the total number of asynchronous
 system trap operations and scheduled wakeup requests that can be
 outstanding at one time for the user.

 /[NO]BATCH=([PRIMARY], [n-m], [n] [,...] [SECONDARY], [n-m], [n] [,...])
 /[NO]BATCH="[PRIMARY][:] [n-m][,] [n][,...][;] [SECONDARY][:] [n-m][,...]"

 Specifies hours of access permitted for batch jobs. For a detailed
 description of the interpretation of the access specification, see the
 /ACCESS qualifier.

 /BIOLM=n

 Specifies the total buffered I/O operations that can be outstanding
 at one time.

 /BYTLM=n

 Total number of bytes that can be specified for transfer in
 outstanding buffered I/O operations.

 /CLI=cli-name

 Name of the default command interpreter.

 /CLITABLES=table-name

 Name of the default command interpreter tables.

 /CPUTIME=delta-time

 Maximum amount of CPU time a user process can take per session.  The
 unit of time must be in delta format.  0 means infinite.

 /DEFPRIVILEGES=([NO]privname [,...])

 Specifies the default privileges for the user (i.e., those enabled
 at login time).  A NO prefix removes this privilege from the user;
 specifying a privilege without the NO prefix allows the user that
 privilege.

 There are many privileges available with varying degrees of power and
 potential system impact.  Please see the VAX/VMS System Manager's
 Reference Manual for a more detailed discussion of the available
 privileges.

 /DEVICE=device-name

 Name of default device (must be a direct access device) from one to
 fifteen characters.  The colon is automatically added if omitted.
 A blank device is interpreted as SYS$SYSDISK.

 /[NO]DIALUP=([PRIMARY], [n-m], [n] [,...] [SECONDARY], [n-m], [n] [,...])
 /[NO]DIALUP="[PRIMARY][:] [n-m][,] [n][,...][;] [SECONDARY][:] [n-m][,...]"

 Specifies hours of access permitted for interactive login via dialup
 terminals.  For a detailed description of the interpretation of the
 access specification, see the /ACCESS qualifier.

 /DIOLM=n

 Total direct (usually disk) I/O operations that can be outstanding at
 one time.

 /DIRECTORY=directory-name

 Name of default login directory.  Brackets (either [] or <>) must be
 supplied.

 /ENQLM=n

 Total number of lock requests which may be outstanding at one time.

 /EXPIRATION=time

 Expiration date and time of the account.  Specify as an absolute or
 combination time.

 /FILLM=n

 Total number of files that can be open at one time, including active
 network logical links.

 /FLAGS=([NO]option[,...])

 Login flags for this user.  Options which may be specified are:

        [NO]AUDIT      - [do not] audit all security relevant actions
        [NO]AUTOLOGIN  - [do not] restrict this account to autologins only
        [NO]CAPTIVE    - [do not] prevent user from changing any defaults
                                  at login
        [NO]DEFCLI     - [do not] prevent user from changing default CLI
                                  or CLI tables
        [NO]DISCTLY    - [do not] disable <CTRL/Y> interrupts
        [NO]DISFORCE_PWD_CHANGE
                       - [do not] disable forced expired password changes
        [NO]DISMAIL    - [do not] prevent mail delivery to this user
        [NO]DISNEWMAIL - [do not] suppress "New Mail..." announcements
        [NO]DISRECONNECT-[do not] disable automated reconnections
        [NO]DISREPORT  - [do not] disable time of last login and other
                                  security reports
        [NO]DISUSER    - [do not] disable this account completely
        [NO]DISWELCOME - [do not] suppress "Welcome to..." login message
        [NO]GENPWD     - [do not] require user to use generated passwords
        [NO]LOCKPWD    - [do not] prevent user from changing password
        [NO]PWD_EXPIRED- [do not] mark password as expired
        [NO]PWD2_EXPIRED-[do not] mark second password as expired

 /GENERATE
 /GENERATE=CURRENT
 /GENERATE=PRIMARY
 /GENERATE=SECONDARY
 /GENERATE=BOTH
 /GENERATE=ALL

 Generate a random password.  The formats of the passwords is the same
 as for the DCL SET PASSWORD /GENERATE command.

 /[NO]INTERACTIVE=([PRIMARY], [n-m], [n] [,...] [SECONDARY], [n-m], [n] [,...])
 /[NO]INTERACTIVE="[PRIMARY][:] [n-m][,] [n][,...][;] [SECONDARY][:] [n][,...]"

 Specifies hours of access permitted for interactive login via any
 terminal.  For a detailed description of the interpretation of the
 access specification, see the /ACCESS qualifier.

 /JTQUOTA=n

 Specifies the initial byte quota with which the job-wide logical name
 table is to be created with.

 /LGICMD=filespec

 Name of login command file.  Default device and directory are used to
 locate the command file.

 /[NO]LOCAL=([PRIMARY], [n-m], [n] [,...] [SECONDARY], [n-m], [n] [,...])
 /[NO]LOCAL="[PRIMARY][:] [n-m][,] [n][,...][;] [SECONDARY][:] [n-m][,...]"

 Specifies hours of access permitted for interactive login via local
 terminals.  For a detailed description of the interpretation of the
 access specification, see the /ACCESS qualifier.

 /MAXACCTJOBS=n

 Specifies the maximum number of batch, interactive and detached processes
 which may be active at one time for all users which are on the same
 account as the user for which the qualifier is present.

 /MAXDETACH=n

 Specifies the maximum number of detached processes with this username
 that may be active at one time.  Processes which cause this count to
 be exceeded are terminated.

 /MAXJOBS=n

 Maximum number of interactive, batch, and detached processes with this
 username which can be active at one time.  Processes which cause this
 count to be exceeded are terminated.

 /[NO]NETWORK=([PRIMARY], [n-m], [n] [,...] [SECONDARY], [n-m], [n] [,...])
 /[NO]NETWORK="[PRIMARY][:] [n-m][,] [n][,...][;] [SECONDARY][:] [n-m][,...]"

 Specifies hours of access permitted for network jobs.  For a detailed
 description of the interpretation of the access specification, see the
 /ACCESS qualifier.

 /OWNER=owner-name

 Name of owner for billing purposes, etc.  May be from one to 31 characters.

 /PFLAGS=([NO]option[,...])

 This qualifier is obsolete and is retained for compatibility purposes.
 For current usage, see the /ACCESS, etc., qualifiers.
 Login flags for primary days.  Options are:

        [NO]DISDIALUP   - [do not] prohibit user from dialing in
        [NO]DISNETWORK  - [do not] prohibit user from logging in via a
                                        "SET HOST" command.

 /PGFLQUOTA=n

 Total pages that this process can use in the system paging file.  Should
 be a minimum of 2048 for a typical interactive process.

 /P_RESTRICT=(n-m[,...])

      or
 /P_RESTRICT=(n[,...])

 This qualifier is obsolete and is retained for compatibility purposes.
 For current usage, see the /ACCESS, etc., qualifiers.
 Used to specify hours or ranges of hours to restrict user from logging in on
 primary days.

 /P_RESTRICT=(...) is roughly equivalent to /NOACCESS=(PRIMARY, ...)

 /PRCLM=n

 Total number of subprocesses that can exist at one time.

 /PRIMEDAYS=([NO]day[,...])

 Used to define primary and secondary days.  A day prefixed with NO becomes
 a secondary day, and a day without the NO prefix is defined as a primary
 day.  Primary and secondary day definitions are used in conjunction with
 the /ACCESS, etc., qualifiers.

 /PRIORITY=n

 Default base priority for user.  The priority should be in the range from
 0 - 31, and 4 is the default for a timesharing user.

 /PRIVILEGES=([NO]privname[,...])

 Specifies authorized privileges for this user.  Privileges which are
 allowed or disallowed for this user.  A NO prefix removes this privilege
 from the user; specifying a privilege without the NO prefix allows the
 user that privilege.

 There are many privileges available with varying degrees of power and
 potential system impact.  Please see the VAX/VMS System Manager's
 Reference Manual for a more detailed discussion of the available
 privileges.

 /[NO]PWDEXPIRED

 Password is [not] pre-expired.  When a password is pre-expired, the
 user is allowed to log in once, at which time he must change his
 password or be locked out of the system.

 /PWDLIFETIME=delta-time
 /PWDLIFETIME=NONE

 Password lifetime.  If the date of last password change is older than
 the password lifetime, when the user logs in, he is issued a warning
 message and the password is marked as expired.  If there is no password
 lifetime, the password never expires.

 Delta-time is in the form: [dddd-] [hh:mm:ss.cc]

 /PWDMINIMUM=n

 Minimum password length in characters.  Note that this value is only
 enforced by the SET PASSWORD command; passwords in violation of this
 value may be specified to AUTHORIZE.

 /[NO]REMOTE=([PRIMARY], [n-m], [n] [,...] [SECONDARY], [n-m], [n] [,...])
 /[NO]REMOTE="[PRIMARY][:] [n-m][,] [n][,...][;] [SECONDARY][:] [n-m][,...]"

 Specifies hours of access permitted for interactive login via network
 remote terminals (i.e., SET HOST).  For a detailed description of the
 interpretation of the access specification, see the /ACCESS qualifier.

 /SFLAGS=([NO]option[,...])

 This qualifier is obsolete and is retained for compatibility purposes.
 For current usage, see the /ACCESS, etc., qualifiers.
 Login flags for secondary days.  Options are:

        [NO]DISDIALUP   - [do not] prohibit user from dialing in
        [NO]DISNETWORK  - [do not] prohibit user from logging in via a
                                        "SET HOST" command.

 /S_RESTRICT=(n-m[,...])

      or
 /S_RESTRICT=(n[,...])

 This qualifier is obsolete and is retained for compatibility purposes.
 For current usage, see the /ACCESS, etc., qualifiers.
 Used to specify hours or ranges of hours to restrict user from logging in on
 secondary days.

 /S_RESTRICT=(...) is roughly equivalent to /NOACCESS=(SECONDARY, ...)

 /SHRFILLM=n

 Maximum number of shared files allowed to be open at one time.

 /TQELM=n

 Total entries in the timer queue plus the number of temporary common
 event flag clusters that the user can have at one time.

 /UIC=uic

 User identification code as explained in the VAX/VMS System Manager's
 Reference Manual.  The UIC should have an octal group number and user
 number, and be separated by a comma and enclosed in brackets.

 /WSDEFAULT=n

 Initial limit of a working set for the user process.

 /WSEXTENT=n

 Maximum to which the user's process may raise its working set limit
 when there is free memory available.

 /WSQUOTA=n

 Maximum to which the user's process may raise the working set limit
 when system memory is in demand.