NAME

ps − Displays current process status

SYNOPSIS

Syntax conforming to XCU5.0

ps [−aAdejflm] [−o specifier] [=header] ,... [−O specifier] [=header] ,... [−g glist] [−G glist] [−p plist] [−s slist] [−t tlist] [−u ulist] [−U ulist] [−n nlist]

BSD Compatible Syntax

ps [aAeghjlLmsSTuvwx] [o specifier] [=header] ,... [O specifier] [=header] ,... [t tty] [process_number]

The ps command displays the current process status. 

STANDARDS

Interfaces documented on this reference page conform to industry standards as follows:

ps:  XCU5.0

Refer to the standards(5) reference page for more information about industry standards and associated tags. 

OPTIONS

Current Syntax

The following options can be used with ps:

−aPrints information to standard output about all processes, except the session leaders and processes not associated with a terminal. 

−AWrites information for all processes. 

−dPrints information to standard output about all processes, except the session leaders. 

−ePrints information to standard output about all processes.  Equivalent to −A. 

−fGenerates a full listing. 

−g glist
Prints only information about processes that are in the process groups listed in glist.  The glist is a list of process-group identifiers enclosed in " " (double quotes) and separated from one another by a comma or one or more spaces (or tabs), or both.  Because of the way the shell treats spaces and tabs, you need to quote space-separated lists. 

−G glist
Writes information for processes whose real group ID numbers or names are given in glist.  The glist is a list of process-group identifiers enclosed in " " (double quotes) and separated from one another by a comma or one or more spaces (or tabs), or both.  Because of the way the shell treats spaces and tabs, you need to quote space-separated lists. 

−j[Tru64 UNIX]  Produces job control information, with fields specified for user, pid, ppid, pgid, sess, jobc, state, tname, time and command. 

−lGenerates a long listing. 

−m[Tru64 UNIX]  Prints all threads in a task, if the task has more than one. 

−o specifier[=header],...
Specifies a list of format specifiers to describe the output format.

Multiple −o options may be specified.  The final output is a concatenation of all options specified. 

[Tru64 UNIX]  If the −O option is used with one or more −o options, the −O option must appear first on the command line. 

−O specifier[=header],...
[Tru64 UNIX]  Same as the −o option, except it displays the fields specified by pid, state, tname, time, and command in addition to the specifiers supplied on the command line. 

[Tru64 UNIX]  The −O option may be used with one or more −o options.  The result is a concatenated output.  The −O option must be specified first. 

−n nlist
Historically, used to specify an alternative system file name list, nlist, in place of the default. 

[Tru64 UNIX]  The name list concept (see the nlist(3) reference page) does not apply to the Tru64 UNIX ps command; consequently, the −n option is ignored. 

−p plist
Displays only information about processes with the process numbers specified in plist.  The plist argument is either a list of process ID numbers or a list of process ID numbers enclosed in " " (double quotes) and separated from one another by a comma or one or more spaces (or tabs), or both.  Because of the way the shell treats spaces and tabs, you need to quote space-separated lists. 

−r[Tru64 UNIX]  Enables warning messages. 

−s slist
[Tru64 UNIX]  Displays information about processes belonging to the sessions specified in slist.  The slist argument is either a list of session ID numbers or a list of session ID numbers enclosed in " " (double quotes) and separated from one another by a comma or one or more spaces (or tabs), or both.  Because of the way the shell treats spaces and tabs, you need to quote space-separated lists. 

−t tlist
Displays only information about processes associated with the terminals listed in tlist.  The tlist argument is either a list of terminal identifiers or a list of terminal identifiers enclosed in " " (double quotes) and separated from one another by a comma or one or more spaces, or both.  Because of the way the shell treats spaces and tabs, you need to quote space-separated lists. 

Terminal identifiers must be in one of two forms:

     1.The device’s file name

     2.The device’s digit identifier, if the device’s file name begins with tty

−u ulist
Displays only information about processes with the user ID numbers or login names specified in ulist.  The ulist argument is either a list of user IDs or a list of user IDs enclosed in " " (double quotes) and separated from one another by a comma or one or more spaces, or both.  Because of the way the shell treats spaces and tabs, you need to quote space-separated lists. 

In the listing, ps displays the numerical user ID unless the −f option is used; then it displays the login name. 

−U ulist
Writes information for processes whose real user ID numbers or login names are given in ulist.  The ulist argument is either a list of user IDs or a list of user IDs enclosed in " " (double quotes) and separated from one another by a comma or one or more spaces, or both.  Because of the way the shell treats spaces and tabs, you need to quote space-separated lists. 

BSD Compatible Syntax

[Tru64 UNIX]  The following BSD compatible options can be used with ps (note that these options are not prefixed with a − (dash) character):

a[Tru64 UNIX]  Asks for information regarding processes associated with terminals (ordinarily only one’s own processes are displayed). 

A[Tru64 UNIX]  Increases the argument space. 

e[Tru64 UNIX]  Asks for the environment to be printed, as well as the arguments to the command. 

g[Tru64 UNIX]  Asks for all processes.  Without this option, ps only prints interesting processes.  Processes are deemed to be uninteresting if they are process group leaders.  This normally eliminates top-level command interpreters and processes waiting for users to log in on free terminals. 

h[Tru64 UNIX]  Repeats the header after each screenful of information. 

j[Tru64 UNIX]  Produces job control information, with fields specified by user, ppid, pgid, sess, and jobc. 

l[Tru64 UNIX]  Asks for a detailed list, with fields specified by ppid, cp, pri, nice, vsize, rssize and wchan. 

L[Tru64 UNIX]  Lists all available format specifiers. 

m[Tru64 UNIX]  Prints all threads in a task, if the task has more than one. 

o specifier[=header],...
[Tru64 UNIX]  Specifies a list of format specifiers to describe the output format.

O specifier[=header],...
[Tru64 UNIX]  Same as o, except it displays the fields specified by pid, state, tname, cputime, and comm in addition to the specifiers supplied on the command line. 

s[Tru64 UNIX]  Gives signal states of the processes, with fields specified by uid, cursig, sig, sigmask, sigignore, and sigcatch. 

S[Tru64 UNIX]  Prints usage summaries (total usage of a command, as opposed to current usage). 

ttty[Tru64 UNIX]  Lists only processes for the specified terminal. 

T[Tru64 UNIX]  Lists all processes on your terminal. 

u[Tru64 UNIX]  Produces a user oriented output. This includes fields specified by user, pcpu, pmem, vsize, rssize, and start. 

v[Tru64 UNIX]  Produces a version of the output containing virtual memory statistics.  This includes fields specified by cputime, sl, pagein, vsize, rssize, pcpu, and pmem. 

w[Tru64 UNIX]  Uses a wide output format (132 columns (bytes) rather than 80); if this option is doubled (ww), uses an arbitrarily wide output.  This information determines how much of long commands to print. 

x[Tru64 UNIX]  Asks even about processes with no terminal. 

OPERANDS

Current Syntax

None

BSD Compatible Syntax

process_number
[Tru64 UNIX]  Restricts output to the specified process. This argument must be entered last on the command line.

DESCRIPTION

While ps is a fairly accurate snapshot of the system, ps cannot begin and finish a snapshot as fast as some processes change state.  At times there may be minor discrepancies. 

The ps command can be used on multiprocessing systems and for querying the system state of realtime applications for their POSIX priority and scheduling policy. 

Output formats for each process include the process ID (pid), control terminal of the process (tname), CPU time used by the process (cputime) (this includes both user and system time), the state of the process (state), and an indication of the command that is running (command).  The abbreviation tty indicates a terminal. 

[Tru64 UNIX]  The state is given by a sequence of letters, for example, RWN.  The first letter indicates the status of the process:

R[Tru64 UNIX]  Runnable process. 

U[Tru64 UNIX]  Uninterruptible sleeping process. 

S[Tru64 UNIX]  Process sleeping for less than about 20 seconds. 

I[Tru64 UNIX]  Idle (sleeping longer than about 20 seconds) process. 

T[Tru64 UNIX]  Stopped process. 

H[Tru64 UNIX]  Halted process. 

[Tru64 UNIX]  Additional characters after these, if any, indicate additional state information:

W[Tru64 UNIX]  Process is swapped out (shows a blank space if the process is loaded (in-core)). 

>[Tru64 UNIX]  Process has specified a soft limit on memory requirements and is exceeding that limit; such a process is (necessarily) not swapped. 

[Tru64 UNIX]  An additional letter may indicate whether a process is running with altered CPU scheduling priority (nice):

N[Tru64 UNIX]  Process priority is reduced. 

<[Tru64 UNIX]  Process priority has been artificially raised. 

+[Tru64 UNIX]  Process is a process group leader with a controlling terminal. 

Format Specifiers

The following list contains all format specifiers that can be used with ps:

Compound Format Specifiers

[Tru64 UNIX]  Compound format specifiers are made up of groups of individual format specifiers, as follows:

Process Flags

The flags associated with process in <sys/proc.h> are as follows:

<defunct>
A process that has exited but whose parent process has not waited for it.

<error>
[Tru64 UNIX]  A process for which user area information could not be obtained due to a shortage of system memory.

<exiting>
A process that is blocked trying to exit.

NOTES

     1.[Tru64 UNIX]  The following BSD compatible options are not supported.  (You can reconstruct the output of these options by using the appropriate format specifiers, however.) 

c[Tru64 UNIX]  Displays the command name, as stored internally in the system for purposes of accounting, rather than the command arguments, which are kept in the process’s address space. 

n[Tru64 UNIX]  Displays numeric output.  In a long listing, the wchan field is printed numerically rather than symbolically.  In a user listing, the user field is replaced by a uid field. 

     2.The arguments displayed by args and command format specifiers reflect the arguments passed to the command at its invocation.  Any modification made to the arguments by the running command are not available. 

     3.The arguments displayed by args and command format specifiers are the only output fields that contain embedded blanks, which may be a concern if the output is passed to some type of parser.  Since output fields appear in the order of the format specifiers on the command line, you should put these specifiers at the end of the command if you are using a parser to analyze the output. 

RESTRICTIONS

     1.[Tru64 UNIX]  When you enter a ps command while running an application that forks child processes, you might see some child processes listed as being in the <defunct> state after they have exited.  Processes in this state cannot be killed until the process that forked them is killed. 

[Tru64 UNIX]  The system puts exiting child processes in the <defunct> state if their parent process is still running and has not caught the SIGCHLD signal or executed a wait() system call. 

[Tru64 UNIX]  To avoid having users encounter this problem when they run your application, make sure that your program logic either catches the SIGCHLD signal or executes a wait() system call when spawning a child process. 

     2.[Tru64 UNIX]  It is an error to use two format specifiers, such as comm and ucomm or command and args that are really synonyms for the same output request. 

     3.[Tru64 UNIX]  It is an error to use two or more compound format specifiers that contain the same simple format specifier, or to use a simple format specifier with a compound format specifier that includes the simple specifier. 

EXIT STATUS

The following exit values are returned:

0Successful completion. 

>0An error occurred. 

EXAMPLES

     1.To list all your processes, enter:

ps

     2.To list all processes, enter:

ps −A

The BSD equivalent looks like this:

ps ax

     3.To list processes owned by specific users, enter:

ps −f −l −ujim,jane,su

     4.To list processes associated with a specific terminal, enter:

ps −t console

The BSD equivalent looks like this:

ps tco

     5.To display only the pid, user, and comm information for all processes, enter:

ps −o pid,user,comm −A

     6.To display the parent process ID under the header PARENT, as well as the default headers (fields specified by pid, state, tname, time, command), enter:

ps −O ppid=PARENT

     7.The following ps command shows the use of the SCHED specifier on a two-processor system with two processor sets:

ps -O SCHED
PID USER %CPU PRI UPR NI PPR PSR POL PSET S   TTY        TIME COM
458 root  0.0  43  44  0  20   0  TS    0 I + console 0:01.34 csh
561 root  0.0  44  44  0  19   0  TS    0 I   ttyp0   0:00.42 csh
567 root  0.0  44  44  0  19   1  TS   ^2 I   ttyp0   0:00.03 runon
568 root  0.0  44  44  0  19   1  TS   ^2 I   ttyp0   0:00.03 sh
569 root  0.0  44  44  0  19   1  TS   ^2 S   ttyp0   0:00.31 csh
579 root  0.0  44  44  0  19  ~1  TS   ^2 S + ttyp0   0:00.03 runon
580 root  0.0  44  44  0  19  ~1  TS   ^2 S + ttyp0   0:00.03 sh
581 root  0.0  44  44  0  19  ~1  TS   ^2 R + ttyp0   0:00.06 ls -l

The display shows that all processes are running under the default timershare scheduling policy. Processes 458 and 561 are running unbound to processor 0 in processor set 0. Processes 567, 568, and 569, are running on processor 1 and are bound exclusively (^) to processor set 2. Processes 579, 580, and 581 are running bound to processor 1 (~) and are bound exclusively to processor set 2 (^). 

     8.To display the name of the shell you are currently running, enter:

ps -p $$

ENVIRONMENT VARIABLES

The following environment variables affect the execution of ps:

COLUMNS
Overrides the horizontal screen size, used to determine the number of text columns to display.

LANG
Provides a default value for the internationalization variables that are unset or null. If LANG is unset or null, the corresponding value from the default locale is used.  If any of the internationalization variables contain an invalid setting, the utility behaves as if none of the variables had been defined. 

LC_ALL
If set to a non-empty string value, overrides the values of all the other internationalization variables.

LC_CTYPE
Determines the locale for the interpretation of sequences of bytes of text data as characters (for example, single-byte as opposed to multibyte characters in arguments).

LC_MESSAGES
Determines the locale for the format and contents of diagnostic messages written to standard error.

LC_TIME
Determines the format and contents of the date and time strings displayed.

NLSPATH
Determines the location of message catalogues for the processing of LC_MESSAGES. 

FILES

/dev
Searched to find terminal names.

/usr/include/sys/proc.h
Process information.

SEE ALSO

Commands:  kill(1), nice(1), renice(8), runon(1), w(1)

Functions:  exec(2), exit(2), fork(2), getpriority(2), wait(2)

Routines:  nlist(3), sched_setscheduler(3)

Files:  processor_sets(4)

Standards:  standards(5)