XSERVER(1) — Commands

NAME

Xserver − X Window System display server

SYNOPSIS

X [option ...]

DESCRIPTION

X is the generic name for the X Window System display server. It is frequently a link or a copy of the appropriate server binary for driving the most frequently used server on a given machine.

STARTING THE SERVER

The X server is usually started from the X Display Manager program xdm(1). This utility is run from the system boot files and takes care of keeping the server running, prompting for usernames and passwords, and starting up the user sessions.

Installations that run more than one window system may need to use the xinit(1) utility instead of xdm. However, xinit is to be considered a tool for building startup scripts and is not intended for use by end users. Site administrators are strongly urged to use xdm, or build other interfaces for novice users.

The X server may also be started directly by the user, though this method is usually reserved for testing and is not recommended for normal operation. On some platforms, the user must have special permission to start the X server, often because access to certain devices (e.g. /dev/mouse) is restricted.

When the X server starts up, it typically takes over the display. If you are running on a workstation whose console is the display, you may not be able to log into the console while the server is running.

OPTIONS

All of the X servers accept the following command line options:

:displaynumber
the X server runs as the given displaynumber, which by default is 0. If multiple X servers are to run simultaneously on a host, each must have a unique display number. See the DISPLAY NAMES section of the X(1) manual page to learn how to specify which display number clients should try to use.

−a number
sets pointer acceleration (i.e. the ratio of how much is reported to how much the user actually moved the pointer).

−ac disables host-based access control mechanisms. Enables access by any host, and permits any host to modify the access control list. Use with extreme caution. This option exists primarily for running test suites remotely.

−audit level
Sets the audit trail level. The default level is 1, meaning only connection rejections are reported. Level 2 additionally reports all successful connections and disconnects. Level 0 turns off the audit trail. Audit lines are sent as standard error output.

−auth authorization-file
Specifies a file which contains a collection of authorization records used to authenticate access. See also the xdm and Xsecurity manual pages.

bc disables certain kinds of error checking, for bug compatibility with previous releases (e.g., to work around bugs in R2 and R3 xterms and toolkits). Deprecated.

−bs disables backing store support on all screens.

−c turns off key-click.

c volume sets key-click volume (allowable range: 0-100).

−cc class
sets the visual class for the root window of color screens. The class numbers are as specified in the X protocol. Not obeyed by all servers.

−co filename
sets name of RGB color database. The default is <XRoot>/lib/X11/rgb, where <XRoot> refers to the root of the X11 install tree.

−config filename
reads more options from the given file. Options in the file may be separated by newlines if desired. If a ’#’ character appears on a line, all characters between it and the next newline are ignored, providing a simple commenting facility. The −config option itself may appear in the file.

−core causes the server to generate a core dump on fatal errors.

−dpi resolution
sets the resolution of the screen, in dots per inch. To be used when the server cannot determine the screen size from the hardware.

−deferglyphs whichfonts
specifies the types of fonts for which the server should attempt to use deferred glyph loading. whichfonts can be all (all fonts), none (no fonts), or 16 (16 bit fonts only).

−f volume
sets feep (bell) volume (allowable range: 0-100).

−fc cursorFont
sets default cursor font.

−fn font
sets the default font.

−fp fontPath
sets the search path for fonts. This path is a comma separated list of directories which the X server searches for font databases.

−help prints a usage message.

−I causes all remaining command line arguments to be ignored.

−kb disables the XKEYBOARD extension if present.

−p minutes
sets screen-saver pattern cycle time in minutes.

−pn permits the server to continue running if it fails to establish all of its well-known sockets (connection points for clients), but establishes at least one.

−r turns off auto-repeat.

r turns on auto-repeat.

−s minutes
sets screen-saver timeout time in minutes.

−su disables save under support on all screens.

−t number
sets pointer acceleration threshold in pixels (i.e. after how many pixels pointer acceleration should take effect).

−terminate
causes the server to terminate at server reset, instead of continuing to run.

−to seconds
sets default connection timeout in seconds.

−tst disables all testing extensions (e.g., XTEST, XTrap, XTestExtension1).

ttyxx ignored, for servers started the ancient way (from init).

v sets video-off screen-saver preference.

−v sets video-on screen-saver preference.

−wm forces the default backing-store of all windows to be WhenMapped. This is a backdoor way of getting backing-store to apply to all windows. Although all mapped windows will have backing store, the backing store attribute value reported by the server for a window will be the last value established by a client. If it has never been set by a client, the server will report the default value, NotUseful. This behavior is required by the X protocol, which allows the server to exceed the client’s backing store expectations but does not provide a way to tell the client that it is doing so.

−x extension
loads the specified extension at init. This is a no-op for most implementations.

SERVER DEPENDENT OPTIONS

Some X servers accept the following options:

−ld kilobytes
sets the data space limit of the server to the specified number of kilobytes. A value of zero makes the data size as large as possible. The default value of −1 leaves the data space limit unchanged.

−lf files sets the number-of-open-files limit of the server to the specified number. A value is zero makes the limit as large as possible. The default value of −1 leaves the limit unchanged.

−ls kilobytes
sets the stack space limit of the server to the specified number of kilobytes. A value of zero makes the stack size as large as possible. The default value of −1 leaves the stack space limit unchanged.

−logo turns on the X Window System logo display in the screen-saver. There is currently no way to change this from a client.

nologo turns off the X Window System logo display in the screen-saver. There is currently no way to change this from a client.

XDMCP OPTIONS

X servers that support XDMCP have the following options. See the X Display Manager Control Protocol specification for more information.

−query host-name
Enable XDMCP and send Query packets to the specified host.

−broadcast
Enable XDMCP and broadcast BroadcastQuery packets to the network. The first responding display manager will be chosen for the session.

−indirect host-name
Enable XDMCP and send IndirectQuery packets to the specified host.

−port port-num
Use an alternate port number for XDMCP packets. Must be specified before any −query, −broadcast or −indirect options.

−class display-class
XDMCP has an additional display qualifier used in resource lookup for display-specific options. This option sets that value, by default it is "MIT-Unspecified" (not a very useful value).

−cookie xdm-auth-bits
When testing XDM-AUTHENTICATION-1, a private key is shared between the server and the manager. This option sets the value of that private data (not that it is very private, being on the command line!).

−displayID display-id
Yet another XDMCP specific value, this one allows the display manager to identify each display so that it can locate the shared key.

XKEYBOARD OPTIONS

X servers that support the XKEYBOARD extension accept the following options:

−xkbdir directory
base directory for keyboard layout files

−xkbmap filename
keyboard description to load on startup

[+-]accessx
enable(+) or disable(-) AccessX key sequences

−ar1 milliseconds
sets the length of time in milliseconds that a key must be depressed before autorepeat starts

−ar2 milliseconds
sets the length of time in milliseconds that should elapse between autorepeat-generated keystrokes

Many servers also have device-specific command line options. See the manual pages for the individual servers for more details.

NETWORK CONNECTIONS

The X server supports client connections via a platform-dependent subset of the following transport types: TCP/IP, Unix Domain sockets, DECnet, and several varieties of SVR4 local connections. See the DISPLAY NAMES section of the X(1) manual page to learn how to specify which transport type clients should try to use.

SECURITY

The X server implements a platform-dependent subset of the following authorization protocols: MIT-MAGIC-COOKIE-1, XDM-AUTHORIZATION-1, SUN-DES-1, and MIT-KERBEROS-5. See the Xsecurity(1) manual page for information on the operation of these protocols.

Authorization data required by the above protocols is passed to the server in a private file named with the −auth command line option. Each time the server is about to accept the first connection after a reset (or when the server is starting), it reads this file. If this file contains any authorization records, the local host is not automatically allowed access to the server, and only clients which send one of the authorization records contained in the file in the connection setup information will be allowed access. See the Xau manual page for a description of the binary format of this file. See xauth(1) for maintenance of this file, and distribution of its contents to remote hosts.

The X server also uses a host-based access control list for deciding whether or not to accept connections from clients on a particular machine. If no other authorization mechanism is being used, this list initially consists of the host on which the server is running as well as any machines listed in the file /etc/Xn.hosts, where n is the display number of the server. Each line of the file should contain either an Internet hostname (e.g. expo.lcs.mit.edu) or a DECnet hostname in double colon format (e.g. hydra::). There should be no leading or trailing spaces on any lines. For example:

joesworkstation
corporate.company.com
star::
bigcpu::

Users can add or remove hosts from this list and enable or disable access control using the xhost command from the same machine as the server.

The X protocol intrinsically does not have any notion of window operation permissions or place any restrictions on what a client can do; if a program can connect to a display, it has full run of the screen. Sites that have better authentication and authorization systems might wish to make use of the hooks in the libraries and the server to provide additional security models.

SIGNALS

The X server attaches special meaning to the following signals:

SIGHUP This signal causes the server to close all existing connections, free all resources, and restore all defaults. It is sent by the display manager whenever the main user’s main application (usually an xterm or window manager) exits to force the server to clean up and prepare for the next user.

SIGTERM
This signal causes the server to exit cleanly.

SIGUSR1
This signal is used quite differently from either of the above. When the server starts, it checks to see if it has inherited SIGUSR1 as SIG_IGN instead of the usual SIG_DFL. In this case, the server sends a SIGUSR1 to its parent process after it has set up the various connection schemes. Xdm uses this feature to recognize when connecting to the server is possible.

FONTS

The X server can obtain fonts from directories and/or from font servers. The list of directories and font servers the X server uses when trying to open a font is controlled by the font path.

The default font path is "<XRoot>/lib/X11/fonts/misc/, <XRoot>/lib/X11/fonts/Speedo/, <XRoot>/lib/X11/fonts/Type1/, <XRoot>/lib/X11/fonts/75dpi/, <XRoot>/lib/X11/fonts/100dpi/ where <XRoot> refers to the root of the X11 install tree.

The font path can be set with the −fp option or by xset(1) after the server has started.

FILES

/etc/Xn.hosts Initial access control list for display number n

<XRoot>/lib/X11/fonts/misc, <XRoot>/lib/X11/fonts/75dpi, <XRoot>/lib/X11/fonts/100dpi
Bitmap font directories

<XRoot>/lib/X11/fonts/Speedo, <XRoot>/lib/X11/fonts/Type1
Outline font directories

<XRoot>/lib/X11/fonts/PEX PEX font directories

<XRoot>/lib/X11/rgb.txt Color database

/tmp/.X11-unix/Xn Unix domain socket for display number n

/tmp/rcXn Kerberos 5 replay cache for display number n

/usr/adm/Xnmsgs Error log file for display number n if run from init(8)

<XRoot>/lib/X11/xdm/xdm-errors
Default error log file if the server is run from xdm(1)

Note: <XRoot> refers to the root of the X11 install tree.

AUTHORS

The sample server was originally written by Susan Angebranndt, Raymond Drewry, Philip Karlton, and Todd Newman, from Digital Equipment Corporation, with support from a large cast. It has since been extensively rewritten by Keith Packard and Bob Scheifler, from MIT.

— X Version 11 — Release 6

Museum

Related Articles