NAME

pg − Interphase FDDI (Fiber Distributed Data Interface) LAN Controller

SYNOPSIS

Configuration file entry: device pg0 at vba0 csr 0xff0200 vector pgintr
device pg1 at vba0 csr 0xff0400 vector pgintr
driver pg vector pgintr

DESCRIPTION

The Interphase 4211 PG (Peregrine) VMEbus FDDI controller provides host access to FDDI networks.  Class A Dual Attachment and Class B Single Attachment configurations as defined in ANSI X3T9.5 are supported. 

After initialization, the FDDI network interface is accessed via the standard TCP/IP protocol software described by socket(2).  The interface is typically initialized by ifconfig(1M) at boot time from rc(1M). 

SEE ALSO

config(1M), ifconfig(1M), rc(1M), socket(2), sockio(7). 
CX/UX Programmer’s Guide. 

CX/UX Administrator’s Reference