NAME

eg − Interphase Ethernet/802.3 LAN Controller

SYNOPSIS

Configuration file entry: device eg0 at vba0 csr 0xff0800 vector egintr
device eg1 at vba0 csr 0xff1000 vector egintr
device eg2 at vba0 csr 0xff1800 vector egintr
device eg3 at vba0 csr 0xff2000 vector egintr
driver eg vector egintr

DESCRIPTION

The Interphase 4207 EG (Eagle) VMEbus Ethernet controller provides host access to Ethernet/802.3 networks. 

After initialization, the Ethernet network may be accessed via TCP/IP protocol software as documented in socket(2) or raw Ethernet I/O software as documented in ethernet(7).  The interface is typically initialized by ifconfig(1M) at boot time from rc(1M). 

SEE ALSO

config(1M), ethernet(7), ifconfig(1M), rc(1M), socket(2), sockio(7),
CX/UX Programmer’s Guide. 

CX/UX Administrator’s Reference