labelit(1M)       MISC. REFERENCE MANUAL PAGES        labelit(1M)



NAME
     labelit (s5) - provide labels for s5 file systems

SYNOPSIS
     labelit [-F s5]  [generic_options]  [-n]  special  [  fsname
     volume ]

DESCRIPTION
     generic_options are options supported by the generic labelit
     command.

     labelit can be used to provide labels for unmounted  s5 disk
     file systems or s5 file systems being copied to tape.

     With the optional arguments omitted, labelit prints  current
     label values.

     The  special  name  should  be  the  disk  partition  (e.g.,
     /dev/rdsk/c0d0s6),    or    the    cartridge   tape   (e.g.,
     /dev/rSA/ctape1).   The  device  may  not  be  on  a  remote
     machine.

     The fsname argument represents the mounted name (e.g., root,
     u1, etc.)  of the file system.

     Volume may be used to equate an internal name  to  a  volume
     name applied externally to the disk pack, diskette or tape.

     For file systems on disk, fsname and volume are recorded  in
     the superblock.

     The options are:

     -F s5     Specifies the s5-FSType.  Used to ensure  that  an
               s5 file system is labelled.

     -n        Provides for initial tape labeling only (This des-
               troys the previous contents of the tape).

SEE ALSO
     generic labelit(1M), makefsys(1M), s5_specific mount(1M).
     fs(4) in the Programmer's Reference Manual.













                         Last change: s5                        1