Does the BeOS support high-performance SCSI cards?
|
![[Bar]](../../graphics/black_bar.gif)
|
|
BeOS for Power Mac
Hardware Requirements
Does the BeOS support high-performance SCSI cards, like the Adaptec Ultra SCSI card that comes in the Power Center Pro?
|
BeOS for Power Mac:
Hardware Requirements
|
FAQ Number:
FAQ-0339
|
Last Modified:
8/28/98
|
Keywords:
BeOS,
Power,
Mac,
Hardware,
Requirements,
SCSI,
card,
Adaptec
|
|
No. At this time, the BeOS supports only the built-in SCSI interfaces on both Power Macintosh and BeBox hardware.
Fortunately for customers with these systems there is a work around. The BeOS will work with SCSI devices which are connected to the SCSI cable from the main logic board (rather than the cable which connects to the Adaptec card). You need not remove the Adaptec card as the BeOS will only recognize SCSI devices connected to the logic board SCSI bus, and will ignore all devices connected to the Adaptec card.
|
|
|
Copyright ©1998 Be, Inc.
Be is a registered trademark, and BeOS, BeBox, BeWare, GeekPort, the Be logo
and the BeOS logo are trademarks of Be, Inc. All other trademarks mentioned
are the property of their respective owners.
Icons used herein are the property of Be Inc. All rights reserved.
Comments about this site? Please write us at webmaster@be.com.
|
