uucico(1M)                                                       uucico(1M)


   NAME
         uucico - file transport program for the uucp system

   SYNOPSIS
         /usr/lib/uucp/uucico [options]

   DESCRIPTION
         uucico is the file transport program for uucp work file transfers.
         The following options are available.

        -ctype The first field in the Devices file is the "Type" field.  The
                -c option forces uucico to only use entries in the "Type"
                field that match the user specified type.  The specified type
                is usually the name of a local area network.

        -dspool_directory
                This option specifies the directory spool_directory that
                contains the uucp work files to be transferred.  The default
                spool directory is /var/spool/uucp.

        -f     This option is used to "force execution" of uucico by ignoring
                the limit on the maximum number of uucicos defined in the
                /etc/uucp/Limits file.

        -iinterface
                This option defines the interface used with uucico.  The
                interface only affects slave mode.  Known interfaces are UNIX
                (default), TLI (basic Transport Layer Interface), and TLIS
                (Transport Layer Interface with Streams modules, read/write).

        -rrole_number
                The role_number 1 is used for master mode.  role_number 0 is
                used for slave mode (default).  When uucico is started by a
                program or cron, role_number 1 should be used for master mode.

        -ssystem_name
                The -s option defines the remote system (system_name) that
                uucico will try to contact.  It is required when the role is
                master; system_name must be defined in the Systems file.

        -xdebug_level
                Both uux and uucp queue jobs that will be transferred by
                uucico.  These jobs are normally started by the uusched
                scheduler, for debugging purposes, and can be started
                manually.  For example, the shell Uutry starts uucico with
                debugging turned on.  The debug_level is a number between 0
                and 9.  Higher numbers give more detailed debugging
                information.





   7/91                                                                 Page 1

   uucico(1M)                                                       uucico(1M)


   FILES
         /etc/uucp/Systems
         /etc/uucp/Permissions
         /etc/uucp/Devices
         /etc/uucp/Devconfig
         /etc/uucp/Sysfiles
         /etc/uucp/Limits
         /var/spool/uucp/*
         /var/spool/locks/*
         /var/spool/uucppublic/*

   SEE ALSO
         cron(1M), uusched(1M), Uutry(1M).
         uucp(1C), uustat(1C), uux(1C) in the User's Reference Manual.







































   Page 2                                                                 7/91