slink(1M) (TCP/IP) slink(1M)
NAME
slink - streams linker
SYNOPSIS
slink [ -v ] [ -p ] [ -u ] [ -f ] [ -c file ] [ func [arg1 arg2 ...]]
DESCRIPTION
slink is a STREAMS configuration utility which is used to link
together the various STREAMS modules and drivers required for STREAMS
TCP/IP. Input to slink is in the form of a script specifying the
STREAMS operations to be performed. Input is normally taken from the
file /etc/strcf.
The following options may be specified on the slink command line:
-c file Use file instead of /etc/strcf.
-v Verbose mode (each operation is logged to stderr).
-p Don't use persistent links (i.e., slink will remain in the
background).
-f Don't use persistent links and don't fork (i.e., slink will
remain in foreground).
-u Unlink persistent links (i.e., shut down network).
The configuration file contains a list of functions, each of which is
composed of a list of commands. Each command is a call to one of the
functions defined in the configuration file or to one of a set of
built-in functions. Among the built-in functions are the basic
STREAMS operations open, link, and push, along with several TCP/IP-
specific functions.
slink processing consists of parsing the input file, then calling the
user-defined function boot, which is normally used to set up the
standard configuration at boot time. If a function is specified on
the slink command line, that function will be called instead of boot.
By default, slink establishes streams with persistent links (IPLINK)
and exits following the execution of the specified function. If the
-p flag is specified, slink establishes streams with regular links
(ILINK) and remains idle in the background, holding open whatever
file descriptors have been opened by the configuration commands. If
the -f flag is specified, slink establishes streams with regular
links (ILINK) and remains in the foreground, holding open whatever
file descriptors have been opened by the configuration commands.
A function definition has the following form:
7/91 Page 1
slink(1M) (TCP/IP) slink(1M)
function-name {
command1
command2
...
}
The syntax for commands is:
function arg1 arg2 arg3 ...
or
var = function arg1 arg2 arg3 ...
The placement of newlines is important: a newline must follow the
left and right braces and every command. Extra newlines are allowed,
i.e. where one newline is required, more than one may be used. A
backslash (\) followed immediately by a newline is considered
equivalent to a space, i.e. may be used to continue a command on a
new line. The use of other white space characters (spaces and tabs)
is at the discretion of the user, except that there must be white
space separating the function name and the arguments of a command.
Comments are delimited by # and newline, and are considered
equivalent to a newline.
Function and variable names may be any string of characters taken
from A-Z, a-z, 0-9, and , except that the first character cannot be
a digit. Function names and variable names occupy separate name
spaces. All functions are global and may be forward referenced. All
variables are local to the functions in which they occur.
Variables are defined when they appear to the left of an equals (=)
on a command line; for example,
tcp = open /dev/tcp
The variable acquires the value returned by the command. In the
above example, the value of the variable tcp will be the file
descriptor returned by the open call.
Arguments to a command may be either variables, parameters, or
strings.
A variable that appears as an argument must have been assigned a
value on a previous command line in that function.
Parameters take the form of a dollar sign ($) followed by one or two
decimal digits, and are replaced with the corresponding argument from
the function call. If a given parameter was not specified in the
function call, an error results (e.g. if a command references $3 and
only two arguments were passed to the function, an execution error
will occur).
Page 2 7/91
slink(1M) (TCP/IP) slink(1M)
Strings are sequences of characters optionally enclosed in double
quotes ("). Quotes may be used to prevent a string from being
interpreted as a variable name or a parameter, and to allow the
inclusion of spaces, tabs, and the special characters {, }, =, and #.
The backslash (\) may also be used to quote the characters {, }, =,
#, ", and \ individually.
The following built-in functions are provided by slink:
open path Open the device specified by pathname path.
Returns a file descriptor referencing the open
stream.
link fd1 fd2 Link the stream referenced by fd2 beneath the
stream referenced by fd1. Returns the link
identifier associated with the link. Unless
the -f or -p flag is specified on the command
line, the streams will be linked with
persistent links. Note: fd2 cannot be used
after this operation.
push fd module Push the module module onto the stream
referenced by fd.
sifname fd link name Send a SIOCSIFNAME (set interface name) ioctl
down the stream referenced by fd for the link
associated with link identifier link specifying
the name name.
unitsel fd unit Send a IFUNITSEL (unit select) ioctl down the
stream referenced by fd specifying unit unit.
dlattach fd unit Send a DLATTACHREQ message down the stream
referenced by fd specifying unit unit.
initqp path qname lowat hiwat ...
Send an INITQPARMS (initialize queue
parameters) ioctl to the driver corresponding
to pathname path. qname specifies the queue
for which the low and high water marks will be
set, and must be one of:
hd stream head
rq read queue
wq write queue
muxrq
multiplexor read queue
muxwq
multiplexor write queue
7/91 Page 3
slink(1M) (TCP/IP) slink(1M)
lowat and hiwat specify the new low and high
water marks for the queue. Both lowat and
hiwat must be present. To change only one of
these parameters, the other may be replaced
with a dash (-). Up to five qname lowat hiwat
triplets may be present.
strcat str1 str2 Concatenate strings str1 and str2 and return
the resulting string.
return val Set the return value for the current function
to val.
Note: executing a return command does not
terminate execution of the current function.
FILES
/etc/strcf
SEE ALSO
strcf(4)
Page 4 7/91