labelit(1M) labelit(1M)
NAME
labelit (generic) - provide labels for file systems
SYNOPSIS
labelit [-F FSType] [-V] [current_options] [-o specific_options]
special [operands]
DESCRIPTION
labelit can be used to provide labels for unmounted disk file systems
or file systems being copied to tape.
The special name should be the disk partition (e.g.,
/dev/rdsk/c0d0s6), or the cartridge tape (e.g., /dev/rmt/ctape1).
The device may not be on a remote machine. operands are FSType-
specific and the manual page of the FSType-specific labelit command
should be consulted for a detailed description.
current_options are options supported by the s5-specific module of
labelit. Other FSTypes do not necessarily support these options.
specific_options indicate suboptions specified in a comma-separated
list of suboptions and/or keyword-attribute pairs for interpretation
by the FSType-specific module of the command.
The options are:
-F specify the FSType on which to operate. The FSType should
either be specified here or be determinable from
/etc/vfstab by matching the special with an entry in the
table.
-V echo complete command line. This option is used to verify
and validate the command line. Additional information
obtained via a /etc/vfstab lookup is included in the
output. The command is not executed.
-o Specify FSType-specific options.
NOTE
This command may not be supported for all FSTypes.
FILES
/etc/vfstab list of default parameters for each file system
SEE ALSO
makefsys(1M), vfstab(4).
Manual pages for the FSType-specific modules of labelit.
7/91 Page 1