ls(1) (XENIX Compatibility Package) ls(1)
NAME
ls, lc - list contents of directory
SYNOPSIS
ls [-RadLCxmlnogrtucpFbqisf1] [names]
lc [-1CFLRabcfgilmnopqrstux] [name...]
DESCRIPTION
For each directory argument, ls lists the contents of the directory
for each file argument. lc functions the same as ls except that the
lc default output format is columnar, even if the output is
redirected. ls repeats its name and any other information requested.
The output is sorted alphabetically by default. When no argument is
given, the current directory is listed. When several arguments are
given, the arguments are first sorted appropriately, but file
arguments appear before directories and their contents.
There are three major listing formats. The default format for output
directed to a terminal is multi-column with entries sorted down the
columns. The -1 option allows single column output and -m enables
stream output format. In order to determine output formats for the
-C, -x, and -m options, ls uses an environment variable, COLUMNS, to
determine the number of character positions available on one output
line. If this variable is not set, the terminfo(4) database is used
to determine the number of columns, based on the environment variable
TERM. If this information cannot be obtained, 80 columns are
assumed.
The ls command has the following options:
-R Recursively list subdirectories encountered.
-a List all entries, including those that begin with a dot (.),
which are normally not listed.
-d If an argument is a directory, list only its name (not its
contents); often used with -l to get the status of a directory.
-L If an argument is a symbolic link, list the file or directory
the link references rather than the link itself.
-C Multi-column output with entries sorted down the columns. This
is the default output format.
-x Multi-column output with entries sorted across rather than down
the page.
-m Stream output format; files are listed across the page,
separated by commas.
7/91 Page 1
ls(1) (XENIX Compatibility Package) ls(1)
-l List in long format, giving mode, number of links, owner,
group, size in bytes, and time of last modification for each
file (see below). If the file is a special file, the size
field instead contains the major and minor device numbers
rather than a size. If the file is a symbolic link, the
filename is printed followed by ``->'' and the pathname of the
referenced file.
-n The same as -l, except that the owner's UID and group's GID
numbers are printed, rather than the associated character
strings.
-o The same as -l, except that the group is not printed.
-g The same as -l, except that the owner is not printed.
-r Reverse the order of sort to get reverse alphabetic or oldest
first as appropriate.
-t Sort by time stamp (latest first) instead of by name. The
default is the last modification time. (See -n and -c.)
-u Use time of last access instead of last modification for
sorting (with the -t option) or printing (with the -l option).
-c Use time of last modification of the i-node (file created, mode
changed, etc.) for sorting (-t) or printing (-l).
-p Put a slash (/) after each filename if the file is a directory.
-F Put a slash (/) after each filename if the file is a directory,
an asterisk (*) if the file is an executable, and an ampersand
(@) if the file is a symbolic link.
-b Force printing of non-printable characters to be in the octal
\ddd notation.
-q Force printing of non-printable characters in file names as the
character question mark (?).
-i For each file, print the i-number in the first column of the
report.
-s Give size in blocks, including indirect blocks, for each entry.
-f Force each argument to be interpreted as a directory and list
the name found in each slot. This option turns off -l, -t, -s,
and -r, and turns on -a; the order is the order in which
entries appear in the directory.
Page 2 7/91
ls(1) (XENIX Compatibility Package) ls(1)
-1 Print one entry per line of output.
The mode printed under the -l option consists of ten characters. The
first character may be one of the following:
d the entry is a directory;
l the entry is a symbolic link;
b the entry is a block special file;
c the entry is a character special file;
p the entry is a fifo (a.k.a. ``named pipe'') special file;
- the entry is an ordinary file.
s the entry is a XENIX semaphore.
m the entry is a XENIX shared data (memory).
The next 9 characters are interpreted as three sets of three bits
each. The first set refers to the owner's permissions; the next to
permissions of others in the user-group of the file; and the last to
all others. Within each set, the three characters indicate
permission to read, to write, and to execute the file as a program,
respectively. For a directory, ``execute'' permission is interpreted
to mean permission to search the directory for a specified file.
ls -l (the long list) prints its output as follows:
-rwxrwxrwx 1 smith dev 10876 May 16 9:42 part2
Reading from right to left, you see that the current directory holds
one file, named part2. Next, the last time that file's contents were
modified was 9:42 A.M. on May 16. The file contains 10,876
characters, or bytes. The owner of the file, or the user, belongs to
the group dev (perhaps indicating ``development''), and his or her
login name is smith. The number, in this case 1, indicates the
number of links to file part2; see cp(1). Finally, the dash and
letters tell you that user, group, and others have permissions to
read, write, and execute part2.
The execute (x) symbol here occupies the third position of the
three-character sequence. A - in the third position would have
indicated a denial of execution permissions.
The permissions are indicated as follows:
r the file is readable
w the file is writable
x the file is executable
- the indicated permission is not granted
l mandatory locking occurs during access (the set-group-ID
bit is on and the group execution bit is off)
s the set-user-ID or set-group-ID bit is on, and the
corresponding user or group execution bit is also on
7/91 Page 3
ls(1) (XENIX Compatibility Package) ls(1)
S undefined bit-state (the set-user-ID bit is on and the user
execution bit is off)
t the 1000 (octal) bit, or sticky bit, is on [see chmod(1)],
and execution is on
T the 1000 bit is turned on, and execution is off (undefined
bit-state)
For user and group permissions, the third position is sometimes
occupied by a character other than x or -. s also may occupy this
position, referring to the state of the set-ID bit, whether it be the
user's or the group's. The ability to assume the same ID as the user
during execution is, for example, used during login when you begin as
root but need to assume the identity of the user you login as.
In the case of the sequence of group permissions, l may occupy the
third position. l refers to mandatory file and record locking. This
permission describes a file's ability to allow other files to lock
its reading or writing permissions during access.
For others permissions, the third position may be occupied by t or T.
These refer to the state of the sticky bit and execution permissions.
EXAMPLES
An example of a file's permissions is:
-rwxr--r--
This describes a file that is readable, writable, and executable by
the user and readable by the group and others.
Another example of a file's permissions is:
-rwsr-xr-x
This describes a file that is readable, writable, and executable by
the user, readable and executable by the group and others, and allows
its user-ID to be assumed, during execution, by the user presently
executing it.
Another example of a file's permissions is:
-rw-rwl---
This describes a file that is readable and writable only by the user
and the group and can be locked during access.
An example of a command line:
ls -a
Page 4 7/91
ls(1) (XENIX Compatibility Package) ls(1)
This command prints the names of all files in the current directory,
including those that begin with a dot (.), which normally do not
print.
Another example of a command line:
ls -aisn
This command provides information on all files, including those that
begin with a dot (a), the i-number-the memory address of the i-node
associated with the file-printed in the left-hand column (i); the
size (in blocks) of the files, printed in the column to the right of
the i-numbers (s); finally, the report is displayed in the numeric
version of the long list, printing the UID (instead of user name) and
GID (instead of group name) numbers associated with the files.
When the sizes of the files in a directory are listed, a total count
of blocks, including indirect blocks, is printed.
FILES
/etc/passwd user IDs for ls -l and ls -o
/etc/group group IDs for ls -l and ls -g
/usr/share/lib/terminfo/?/* terminal information database
SEE ALSO
chmod(1), find(1).
NOTES
In a Remote File Sharing environment, you may not have the
permissions that the output of the ls -l command leads you to
believe. For more information see the System Administrator's Guide.
Unprintable characters in file names may confuse the columnar output
options.
7/91 Page 5