nslookup(1M) (TCP/IP) nslookup(1M)
NAME
nslookup - query name servers interactively
SYNOPSIS
nslookup [ -l ] [ address ]
DESCRIPTION
nslookup is an interactive program to query ARPA Internet domain name
servers. The user can contact servers to request information about a
specific host or print a list of hosts in the domain.
OPTIONS
-l Use the local host's name server instead of the servers in
/etc/resolve.conf. (If /etc/resolve.conf does not exist or
does not contain server information, the -l option does not
have any effect).
address Use the name server on the host machine with the given
Internet address.
USAGE
Overview
The Internet domain name-space is tree-structured, with four top-
level domains at present:
COM commercial establishments
EDU educational institutions
GOV government agencies
MIL MILNET hosts
If you are looking for a specific host, you need to know something
about the host's organization in order to determine the top-level
domain it belongs to. For instance, if you want to find the Internet
address of a machine at UCLA , do the following:
⊕ Connect with the root server using the root command. The root
server of the name space has knowledge of the top-level
domains.
⊕ Since UCLA is a university, its domain name is ucla.edu.
Connect with a server for the ucla.edu domain with the command
server ucla.edu. The response will print the names of hosts
that act as servers for that domain. Note: the root server
does not have information about ucla.edu, but knows the names
and addresses of hosts that do. Once located by the root
server, all future queries will be sent to the UCLA name
server.
8/91 Page 1
nslookup(1M) (TCP/IP) nslookup(1M)
⊕ To request information about a particular host in the domain
(for instance, locus), just type the host name. To request a
listing of hosts in the UCLA domain, use the ls command. The
ls command requires a domain name (in this case, ucla.edu) as
an argument.
If you are connected with a name server that handles more than one
domain, all lookups for host names must be fully specified with its
domain. For instance, the domain harvard.edu is served by
seismo.css.gov, which also services the css.gov and cornell.edu
domains. A lookup request for the host aiken in the harvard.edu
domain must be specified as aiken.harvard.edu. However, the
set domain=name
and
set defname
commands can be used to automatically append a domain name to each
request.
After a successful lookup of a host, use the finger command to see
who is on the system, or to finger a specific person. To get other
information about the host, use the
set querytype=value
command to change the type of information desired and request another
lookup. (finger requires the type to be A.)
Commands
To exit, type Ctrl-D (EOF). The command line length must be less
than 80 characters. An unrecognized command will be interpreted as a
host name.
host [server]
Look up information for host using the current default server
or using server if it is specified.
server domain
lserver domain
Change the default server to domain. lserver uses the initial
server to look up information about domain while server uses
the current default server. If an authoritative answer can't
be found, the names of servers that might have the answer are
returned.
root Changes the default server to the server for the root of the
domain name space. Currently, the host sri-nic.arpa is used;
this command is a synonym for lserver sri-nic.arpa.) The name
Page 2 8/91
nslookup(1M) (TCP/IP) nslookup(1M)
of the root server can be changed with the set root command.
finger [ name ]
Connect with the finger server on the current host, which is
defined by a previous successful lookup for a host's address
information (see the set querytype =A command). As with the
shell, output can be redirected to a named file using > and >>.
ls [-ah]
List the information available for domain. The default output
contains host names and their Internet addresses. The -a
option lists aliases of hosts in the domain. The -h option
lists CPU and operating system information for the domain. As
with the shell, output can be redirected to a named file using
> and >>. When output is directed to a file, hash marks are
printed for every 50 records received from the server.
view filename
Sort and list the output of the ls command with more(1).
help
? Print a brief summary of commands.
set keyword [ = value ] This command is used to change state
information that affects the lookups. Valid keywords are:
all Prints the current values of the various options to set.
Information about the current default server and host is
also printed.
[ no ] deb[ ug ]
Turn debugging mode on. A lot more information is printed
about the packet sent to the server and the resulting
answer. The default is nodebug.
[ no ] def[ name ]
Append the default domain name to every lookup. The
default is nodefname.
do [ main ] = filename
Change the default domain name to filename. The default
domain name is appended to all lookup requests if defname
option has been set. The default is the value in
/etc/resolve.conf.
q [ querytype ] = value
Change the type of information returned from a query to
one of:
8/91 Page 3
nslookup(1M) (TCP/IP) nslookup(1M)
A The host's Internet address (the default).
CNAME The canonical name for an alias.
HINFO The host CPU and operating system type.
MD The mail destination.
MX The mail exchanger.
MB The mailbox domain name.
MG The mail group member.
MINFO The mailbox or mail list information.
(Other types specified in the RFC883 document are valid,
but are not very useful.)
[ no ] recurse
Tell the name server to query other servers if it does
not have the information. The default is recurse.
ret [ ry ] = count
Set the number of times to retry a request before giving
up to count. When a reply to a request is not received
within a certain amount of time (changed with set
timeout), the request is resent. The default is count is
2.
ro [ ot ] = host
Change the name of the root server to host. This affects
the root command. The default root server is sri-
nic.arpa.
t [ timeout ] = interval
Change the time-out for a reply to interval seconds. The
default interval is 10 seconds.
[ no ] v[ c ]
Always use a virtual circuit when sending requests to the
server. The default is novc.
FILES
/etc/resolve.conf initial domain name and name server addresses.
SEE ALSO
named(1M), resolver(3N), resolve.conf(4), RFC 882, RFC 883.
DIAGNOSTICS
If the lookup request was not successful, an error message is
printed. Possible errors are:
Time-out
The server did not respond to a request after a certain amount
of time (changed with set timeout =value) and a certain number
of retries (changed with set retry =value).
Page 4 8/91
nslookup(1M) (TCP/IP) nslookup(1M)
No information
Depending on the query type set with the set querytype command,
no information about the host was available, though the host
name is valid.
Non-existent domain
The host or domain name does not exist.
Connection refused
Network is unreachable
The connection to the name or finger server could not be made
at the current time. This error commonly occurs with finger
requests.
Server failure
The name server found an internal inconsistency in its database
and could not return a valid answer.
Refused
The name server refused to service the request.
The following error should not occur and it indicates a bug in the
program.
Format error
The name server found that the request packet was not in the
proper format.
8/91 Page 5