labelit(1M)                        (s5)                         labelit(1M)


   NAME
         labelit (s5) - provide labels for s5 file systems

   SYNOPSIS
         labelit [-F s5] [generic_options] [-n] special [ fsname volume ]

   DESCRIPTION
         generic_options are options supported by the generic labelit command.

         labelit can be used to provide labels for unmounted  s5 disk file
         systems or s5 file systems being copied to tape.

         With the optional arguments omitted, labelit prints current label
         values.

         The special name should be the disk partition (e.g.,
         /dev/rdsk/c0d0s6), or the cartridge tape (e.g., /dev/rmt/ctape1).
         The device may not be on a remote machine.

         The fsname argument represents the mounted name (e.g., root, u1,
         etc.)  of the file system.

         Volume may be used to equate an internal name to a volume name
         applied externally to the disk pack, diskette or tape.

         For file systems on disk, fsname and volume are recorded in the
         superblock.

         The options are:

         -F s5     Specifies the s5-FSType.  Used to ensure that an s5 file
                   system is labelled.

         -n        Provides for initial tape labeling only (This destroys the
                   previous contents of the tape).

   SEE ALSO
         generic labelit(1M), makefsys(1M), s5_specific mount(1M).
         fs(4) in the Programmer's Reference Manual.














   8/91                                                                 Page 1