indicator(1F) (Form and Menu Language Interpreter Utilities) indicator(1F)
NAME
indicator - display application specific alarms and/or the "working"
indicator
SYNOPSIS
indicator [-b [n]] [-c column] [-l length] [-o] [-w] [string ...]
DESCRIPTION
The indicator function displays application specific alarms or the
"working" indicator, or both, on the FMLI banner line. By default,
indicator ???? The argument string is a string to be displayed on
the banner line, and should always be the last argument given. Note
that string is not automatically cleared from the banner line.
The following options are available:
-b n The -b option rings the terminal bell n times, where n is
an integer from 1 to 10. The default value is 1. If the
terminal has no bell, the screen is flashed instead, if
possible.
-c column The -c option defines the column of the banner line at
which to start the indicator string. The argument column
must be an integer from 0 to DISPLAYW-1. If the -c option
is not used, column defaults to 0.
-l length The -l option defines the maximum length of the string
displayed. If string is longer than length characters, it
will be truncated. The argument length must be an integer
from 1 to DISPLAYW. If the -l option is not used, length
defaults to DISPLAYW. NOTE: if string doesn't fit it will
be truncated.
-o The -o option causes indicator to duplicate its output to
stdout.
-w The -w option turns on the "working" indicator.
EXAMPLES
When the value entered in a form field is invalid, the following use
of indicator will ring the bell three times and display the word
WRONG starting at column 1 of the banner line.
invalidmsg=`indicator -b 3 -c 1 "WRONG"`
To clear the indicator after telling the user the entry is wrong:
invalidmsg=`indicator -b 9 -c 1 "WRONG"; sleep(3);
indicator -c 1 " "`
8/91 Page 1
indicator(1F) (Form and Menu Language Interpreter Utilities) indicator(1F)
In this example the value of invalidmsg (in this case the default
value Input is not valid), still appears on the FMLI message line.
Page 2 8/91