dialup(4)                                               dialup(4)



NAME
     dialup - modem escape sequence file

DESCRIPTION
     /etc/dialup contains one  or  more  entries  describing  the
     escape  sequences  for  modems  specified  by the user (more
     information to follow). /etc/dialup also contains fields for
     error  strings  or  error  codes  returned by modems after a
     command has been issued.  If these fields are not  set,  the
     attributes will be set for an Apple modem by default.

     The  first  symbol  in  an  /etc/dialup  entry  must  be  an
     identifier  that is taken from mt in remote(4).  If an entry
     is longer than a single line, the lines in  the  entry  must
     end  with  a  ``\''.   Commands  can be one of the following
     abbreviations, followed by a ``='' for a string  command  or
     ``#''  for  a  numeric  command,  and  then  the appropriate
     command sequence for the particular modem.

     ag repeat the last command                 A/
     as attention to signal for modem           AT
     at auto call unit type                     generic
     cd return to command mode                  ;
     cr continuous redial                       X2
     dp dial up                                 D
     ec echo command                            E
     em escape command                          +++
     dm data mode                               O
     hu hang up line                            H
     vb verbal command returned from modem      V1

     The following are return values from the modem if vb=V1:

     ok the previous command was OK             OK
     ct the modem is connected and is online    CONNECT
     nc the modem has been disconnected         NO CARRIER
     er the previous command is invalid         ERROR

EXAMPLES
     If an entry in /etc/remote looked like this:

          apple:br=1200:at=generic:mt=apple

     the corresponding entry in /etc/dialup might look like this:

     apple:as=AT:at=generic:dp=D:cr=X2:\
     hu=H:em=+++; ag=A/;ec=E;dm=0:cd=;:ok=OK:\
     ct=CONNECT:nc=NO CARRIER: er=ERROR:vb=V1:

FILES
     /etc/dialup
          File



January 1992                                                    1

dialup(4)                                               dialup(4)



     /etc/remote
          File

SEE ALSO
     phones(4), remote(4)

     tip(1C) in A/UX Command Reference
















































2                                                    January 1992