dialup(4)                                               dialup(4)



     NAME
          dialup - modem escape sequence file

     DESCRIPTION
          /etc/dialup contains one or more entries describing the  es-
          cape sequences for modems specified by the user (more infor-
          mation to follow). /etc/dialup also contains fields for  er-
          ror  strings  or error codes returned by modems after a com-
          mand has been issued.  If these fields are not set, the  at-
          tributes will be set for an Apple modem by default.

          The first symbol in an /etc/dialup entry must be an identif-
          ier  which  is  taken  from mt in remote(4).  If an entry is
          longer than a single line, the lines in the entry  must  end
          with a ``\''.  Commands can be one of the following abbrevi-
          ations, followed by a ``='' for a string  command  or  ``#''
          for  a numeric command, and then the appropriate command se-
          quence for the particular modem.

          ag repeat the last command                 A/
          as attention to signal for modem           AT
          at auto call unit type                     generic
          cd return to command mode                  ;
          cr continuous redial                       X2
          dp dial up                                 D
          ec echo command                            E
          em escape command                          +++
          dm data mode                               O
          hu hang up line                            H
          vb verbal command returned from modem      V1

          The following are return values from the modem if vb=V1:

          ok the previous command was OK             OK
          ct the modem is connected and is online    CONNECT
          nc the modem has been disconnected         NO CARRIER
          er the previous command is invalid         ERROR

     EXAMPLES
          If an entry in /etc/remote looked like this:

               apple:br=1200:at=generic:mt=apple

          the corresponding entry in /etc/dialup might look like this:

          apple:as=AT:at=generic:dp=D:cr=X2:\
          hu=H:em=+++; ag=A/;ec=E;dm=0:cd=;:ok=OK:\
          ct=CONNECT:nc=NO CARRIER: er=ERROR:vb=V1:

     FILES
          /etc/dialup
          /etc/remote



     April, 1990                                                     1

     dialup(4)                                               dialup(4)



     SEE ALSO
          tip(1C), phones(4), remote(4).





















































     2                                                     April, 1990