lpsched(1M)                                           lpsched(1M)



     NAME
          lpsched, lpshut, lpmove - start/stop the LP request
          scheduler and move requests

     SYNOPSIS
          /usr/lib/lpsched
          /usr/lib/lpshut
          /usr/lib/lpmove requests dest
          /usr/lib/lpmove dest1 dest2

     DESCRIPTION
          lpsched schedules requests taken by lp(1) for printing on
          line printers.

          lpshut shuts down the line printer scheduler.  All printers
          that are printing at the time lpshut is invoked will stop
          printing.  Requests that were printing at the time a printer
          was shut down will be reprinted in their entirety after
          lpsched is started again.  All LP commands perform their
          functions even when lpsched is not running.

          lpmove moves requests that were queued by lp(1) between LP
          destinations.  This command may be used only when lpsched is
          not running.

          The first form of the command moves the named requests to
          the LP destination, dest.  Requests are request ids as
          returned by lp.  The second form moves all requests for
          destination dest1 to destination dest2.  As a side effect,
          lp will reject requests for dest1.

          Note that lpmove never checks the acceptance status (see
          accept(1M)) for the new destination when moving requests.

     FILES
          /usr/lib/lpsched
          /usr/lib/lpshut
          /usr/lib/lpmove
          /usr/spool/lp/*

     SEE ALSO
          accept(1M), enable(1), lp(1), lpadmin(1M), lpstat(1).













     Page 1                                        (last mod. 1/15/87)