vi(1) vi(1)
NAME
vi, view, vedit - screen-oriented (visual) display editor
SYNOPSIS
vi [+command] [-l] [-r file] [-R] [-t tag] [-wn] [-x] name
...
view [+command] [-l] [-r file] [-R] [-t tag] [-wn] [-x] name
...
vedit [+command] [-l] [-r file] [-R] [-t tag] [-wn] [-x]
name ...
DESCRIPTION
vi (visual) is a display-oriented text editor based on an
underlying line editor ex(1). It is possible to use the
command mode of ex from within vi and vice-versa.
When using vi, changes you make to the file are reflected in
what you see on your terminal screen. The position of the
cursor on the screen indicates the position within the file.
INVOCATION
The following invocation options are interpreted by vi:
-l LISP mode; indents appropriately for lisp
code, the () {} [[ and ]] commands in vi and
open are modified to have meaning for lisp.
-r file Recover file after an editor or system crash.
If file is not specified a list of all saved
files will be printed.
-R Read only mode; the readonly flag is set,
preventing accidental overwriting of the
file.
-t tag Edit the file containing the tag and position
the editor at its definition.
-wn Set the default window size to n. This is
useful when using the editor over a slow
speed line.
-x Encryption mode; a key is prompted for
allowing creation or editing of an encrypted
file. This encryption scheme is not secure.
+command The specified ex command is interpreted
before editing begins.
The name argument indicates files to be edited.
The view invocation is the same as vi except that the
Page 1 (last mod. 1/16/87)
vi(1) vi(1)
readonly flag is set.
The vedit invocation is intended for beginners. The report
flag is set to 1, and the showmode and novice flags are set.
These defaults make it easier to get started learning the
editor.
VI MODES
Command Normal and initial mode. Other modes return
to command mode upon completion. ESC
(escape) is used to cancel a partial command.
Input Entered by a i A I o O c C s S R. Text may
then be entered. Input mode is normally
terminated with ESC character, or abnormally
with interrupt.
Last line Reading input for : / ? or !; terminate with
RETURN to execute, interrupt to cancel.
COMMAND SUMMARY
Sample Commands
<- ↑ -> arrow keys move the cursor
h j k l same as arrow keys
itextESCAPE insert text
cwnewESCAPE change word to new
easESCAPE pluralize word
x delete a character
dw delete a word
dd delete a line
3dd . . . 3 lines
u undo previous change
ZZ exit vi, saving changes
:q!RETURN quit, discarding changes
/textRETURN search for text
CONTROL-u,CONTROL-d scroll up or down
:ex-cmdRETURN any ex or ed command
Counts Before vi Commands
Numbers may be typed as a prefix to some commands. They are
interpreted in one of these ways:
line/column number z G |
scroll amount CONTROL-d CONTROL-u
repeat effect most of the rest
Interrupting, Canceling
ESCAPE end insert or incomplete cmd
interrupt your interrupt
CONTROL-l reprints screen
Page 2 (last mod. 1/16/87)
vi(1) vi(1)
CONTROL-r reprint screen if CONTROL-l is -> key
File Manipulation
:wRETURN write back changes
:qRETURN quit
:q!RETURN quit, discard changes
:enameRETURN edit file name
:e!RETURN reedit, discard changes
:e+nameRETURN edit, starting at end
:e +nRETURN edit starting at line n
:e#RETURN edit alternate file
:wnameRETURN write file name
:w!nameRETURN overwrite file name
:shRETURN run shell, then return
:!cmdRETURN run cmd, then return
:nRETURN edit next file in arglist
:nargsRETURN specify new arglist
CONTROL-g show current file and line
:tatagRETURN to tag file entry tag
^] :ta, following word is tag
In general, any ex or ed command (such as substitute or
global) may be typed, preceded by a colon and followed by a
RETURN.
Positioning Within File
CONTROL-f forward screen
CONTROL-b backward screen
CONTROL-d scroll down half screen
CONTROL-u scroll up half screen
G go to specified line (end default)
/pat next line matching pat
?pat prev line matching pat
n repeat last / or ?
N reverse last / or ?
/pat/+n nth line after pat
?pat?-n nth line before pat
]] next section/function
[[ previous section/function
( beginning of sentence
) end of sentence
{ beginning of paragraph
} end of paragraph
% find matching ( ) { or }
Adjusting the Screen
CONTROL-l clear and redraw
CONTROL-r retype, eliminate @ lines
zRETURN redraw, current at window top
Page 3 (last mod. 1/16/87)
vi(1) vi(1)
z-RETURN ... at bottom
z.RETURN ... at center
/pat/z-RETURN pat line at bottom
zn.RETURN use n line window
CONTROL-e scroll window down 1 line
CONTROL-y scroll window up 1 line
Marking and Returning
`` move cursor to previous context
'' ... at first non-white in line
mx mark current position with letter x
`x move cursor to mark x
'x ... at first non-white in line
Line Positioning
H top line on screen
L last line on screen
M middle line on screen
+ next line, at first non-white
- previous line, at first non-white
RETURN return, same as +
or j next line, same column
↑ or k previous line, same column
Character Positioning
^ first non-white
0 beginning of line
$ end of line
h or -> forward
l or <- backwards
CONTROL-h same as <-
space same as ->
fx find x forward
Fx f backward
tx up to x forward
Tx back up to x
; repeat last f F t or T
, inverse of ;
| to specified column
% find matching ( { ) or }
Words, Sentences, Paragraphs
w word forward
b back word
e end of word
) to next sentence
} to next paragraph
( back sentence
Page 4 (last mod. 1/16/87)
vi(1) vi(1)
{ back paragraph
W blank delimited word
B back W
E to end of W
Commands for LISP Mode
) Forward s-expression
} ... but do not stop at atoms
( Back s-expression
{ ... but do not stop at atoms
Corrections During Insert
CONTROL-h erase last character
CONTROL-w erase last word
erase your erase, same as CONTROL-h
kill your kill, erase input this line
\ quotes CONTROL-h, your erase and kill
ESCAPE ends insertion, back to command
interrupt your interrupt, terminates insert
CONTROL-d backtab over autoindent
↑CONTROL-d kill autoindent, save for next
0CONTROL-d ... but at margin next also
CONTROL-v quote non-printing character
Insert and Replace
a append after cursor
i insert before cursor
A append at end of line
I insert before first non-blank
o open line below
O open above
rx replace single character with x
RtextESC replace characters
Operators
Operators are followed by a cursor motion, and affect all
text that would have been moved over. For example, since w
moves over a word, dw deletes the word that would be moved
over. Double the operator, e.g., dd to affect whole lines.
d delete
c change
y yank lines to buffer
< left shift
> right shift
! filter through command
= indent for LISP
Page 5 (last mod. 1/16/87)
vi(1) vi(1)
Miscellaneous Operations
C change rest of line (c$)
D delete rest of line (d$)
s substitute chars (cl)
S substitute lines (cc)
J join lines
x delete characters (dl)
X ... before cursor (dh)
Y yank lines (yy)
Yank and Put
put inserts the text most recently deleted or yanked. If a
buffer is named, however, the text in that buffer is put
instead.
p put back text after cursor
P put before cursor
"xp put from buffer x
"xy yank to buffer x
"xd delete into buffer x
Undo, Redo, Retrieve
u undo last change
U restore current line
. repeat last change
"dp retrieve dth last delete
/usr/bin/vi
/usr/bin/view
/usr/bin/vedit
SEE ALSO
ex (1).
``Using vi'' in the Oreo Text Editing Tools.
CAVEATS AND BUGS
Software tabs using CONTROL-t work only immediately after
the autoindent.
Left and right shifts on intelligent terminals do not make
use of insert and delete character operations in the
terminal.
Page 6 (last mod. 1/16/87)