sort(1) sort(1)
NAME
sort - sort and/or merge files
SYNOPSIS
sort [-c] [-m] [-u] [-o output] [-y kmem] [-z recsz] [-d]
[-f] [-i] [-M] [-n] [-r] [-b] [-t x] [+pos1 [-pos2]] [files]
DESCRIPTION
sort sorts lines of all the named files together and writes
the result on the standard output. The standard input is
read if - is used as a file name or no input files are
named.
Comparisons are based on one or more sort keys extracted
from each line of input. By default, there is one sort key,
the entire input line, and ordering is lexicographic by
bytes in machine collating sequence.
The following flag options alter the default behavior:
-c Check that the input file is sorted according to the
ordering rules; give no output unless the file is out
of sort.
-m Merge only, the input files are already sorted.
-u Unique: suppress all but one in each set of lines
having equal keys.
-o output
The argument given is the name of an output file to use
instead of the standard output. This file may be the
same as one of the inputs. There may be optional
blanks between -o and output.
-y kmem
The amount of main memory used by the sort has a large
impact on its performance. sorting a small file in a
large amount of memory is a waste. If this flag option
is omitted, sort begins using a system default memory
size, and continues to use more space as needed. If
this flag option is presented with a value, kmem, sort
will start using that number of kilobytes of memory,
unless the administrative minimum or maximum is
violated, in which case the corresponding extremum will
be used. Thus, -y0 is guaranteed to start with minimum
memory. By convention, -y (with no argument) starts
with maximum memory.
-z recsz
The size of the longest line read is recorded in the
sort phase so buffers can be allocated during the merge
Page 1 (last mod. 1/16/87)
sort(1) sort(1)
phase. If the sort phase is omitted via the -c or -m
flag options, a popular system default size will be
used. Lines longer than the buffer size will cause
sort to terminate abnormally. Supplying the actual
number of bytes in the longest line to be merged (or
some larger value) will prevent abnormal termination.
The following flag options override the default ordering
rules.
-d ``Dictionary'' order: only letters, digits and blanks
(spaces and tabs) are significant in comparisons.
-f Fold lower case letters into upper case.
-i Ignore characters outside the ASCII range 040-0176 in
non-numeric comparisons.
-M Compare as months. The first three non-blank
characters of the field are folded to upper case and
compared so that ``JAN'' < ``FEB'' < ... < ``DEC''.
Invalid fields compare low to ``JAN''. The -M flag
option implies the -b flag option (see below).
-n An initial numeric string, consisting of optional
blanks, optional minus sign, and zero or more digits
with optional decimal point, is sorted by arithmetic
value. The -n flag option implies the -b flag option
(see below). Note that the -b flag option is only
effective when restricted sort key specifications are
in effect.
-r Reverse the sense of comparisons.
When ordering flag options appear before restricted sort key
specifications, the requested ordering rules are applied
globally to all sort keys. When attached to a specific sort
key (described below), the specified ordering flag options
override all global ordering flag options for that key.
The notation +pos1 -pos2 restricts a sort key to one
beginning at pos1 and ending at pos2. The characters at
positions pos1 and pos2 are included in the sort key
(provided that pos2 does not precede pos1). A missing -pos2
means the end of the line.
Specifying pos1 and pos2 involves the notion of a field, a
minimal sequence of characters followed by a field separator
or a newline. By default, the first blank (space or tab) of
a sequence of blanks acts as the field separator. All
blanks in a sequence of blanks are considered to be part of
the next field; for example, all blanks at the beginning of
Page 2 (last mod. 1/16/87)
sort(1) sort(1)
a line are considered to be part of the first field. The
treatment of field separators can be altered using the flag
options:
-b Ignore leading blanks when determining the starting and
ending positions of a restricted sort key. If the -b
flag option is specified before the first +pos1
argument, it will be applied to all +pos1 arguments.
Otherwise, the b flag may be attached independently to
each +pos1 or -pos2 argument (see below).
-tx Use x as the field separator character; x is not
considered to be part of a field (although it may be
included in a sort key). Each occurrence of x is
significant (e.g., xx delimits an empty field).
pos1 and pos2 each have the form m.n optionally followed by
one or more of the flags bdfinr. A starting position
specified by +m.n is interpreted to mean the n+1st character
in the m+1st field. A missing .n means .0, indicating the
first character of the m+1st field. If the b flag is in
effect n is counted from the first non-blank in the m+1st
field; +m.0b refers to the first non-blank character in the
m+1st field.
A last position specified by -m.n is interpreted to mean the
nth character (including separators) after the last
character of the m th field. A missing .n means .0,
indicating the last character of the mth field. If the b
flag is in effect n is counted from the last leading blank
in the m+1st field; -m.1b refers to the first non-blank in
the m+1st field.
When there are multiple sort keys, later keys are compared
only after all earlier keys compare equal. Lines that
otherwise compare equal are ordered with all bytes
significant.
EXAMPLES
sort the contents of infile with the second field as the
sort key:
sort +1 -2 infile
sort, in reverse order, the contents of infile1 and infile2,
placing the output in outfile and using the first character
of the second field as the sort key:
sort -r -o outfile +1.0 -1.2 infile1 infile2
sort, in reverse order, the contents of infile1 and infile2
using the first non-blank character of the second field as
Page 3 (last mod. 1/16/87)
sort(1) sort(1)
the sort key:
sort -r +1.0b -1.1b infile1 infile2
Print the password file (passwd(4)) sorted by the numeric
user ID (the third colon-separated field):
sort -t: +2n -3 /etc/passwd
Print the lines of the already sorted file infile,
suppressing all but the first occurrence of lines having the
same third field (the flag options -um with just one input
file make the choice of a unique representative from a set
of equal lines predictable):
sort -um +2 -3 infile
FILES
/bin/sort
/usr/tmp/stm???
SEE ALSO
comm(1), join(1), uniq(1).
DIAGNOSTICS
Comments and exits with non-zero status for various trouble
conditions (e.g., when input lines are too long), and for
disorder discovered under the -c flag option.
When the last line of an input file is missing a newline
character, sort appends one, prints a warning message, and
continues.
Page 4 (last mod. 1/16/87)