GPR_$INQ_FILL_PATTERN             GPR Calls              GPR_$INQ_FILL_PATTERN


NAME
     gpr_$inq_fill_pattern - returns the fill pattern for the current bitmap.

FORMAT
     gpr_$inq_fill_pattern (pattern, scale, status)

DESCRIPTION
     This routine returns the fill pattern for the current bitmap.

   Output Parameters
     pattern
          The descriptor of the fill pattern bitmap, in gpr_$bitmap_desc_t
          format.  This bitmap is part of the attribute block associated with
          the current bitmap.

     scale
          The number of times each bit in this pattern is to be replicated
          before proceeding to the next bit in the pattern in both the x and y
          directions.  This is a 2-byte integer.

     status
          Completion status, in status_$t format.

SEE ALSO
     gpr_$set_fill_pattern, gpr_$set_fill_background_value.

NOTES
     Currently, the tile pattern must be stored in a bitmap that is  32  x  32
     pixels.   The  scale  factor must be one. Any other pattern size or scale
     value results in an error.  With a one-plane bitmap as the  pattern,  the
     pixel   values   used   are   those   set   by   gpr_$set_fill_value  and
     gpr_$set_fill_background_value. Pixels corresponding to "1" bits  of  the
     pattern  are drawn in the fill value: pixels corresponding to "0" bits of
     the pattern are drawn in the fill background value.