PRINTF(3S) SysV PRINTF(3S)
NAME
printf, fprintf, sprintf - print formatted output
SYNOPSIS
#include <stdio.h>
int printf(format [, arg ] ... )
const char *format;
int fprintf(stream, format [, arg ] ... )
FILE *stream;
const char *format;
int sprintf(s, format [, arg ] ... )
char *s;
const char *format;
DESCRIPTION
printf places output on the standard output stream stdout. fprintf
places output on the named output stream. sprintf places "output,"
followed by the null character (\0), in consecutive bytes starting at *s;
it is the user's responsibility to ensure that enough storage is
available. Each function returns the number of characters transmitted
(not including the \0 in the case of sprintf), or a negative value if an
output error was encountered.
Each of these functions converts, formats, and prints its args under
control of the format. The format is a multibyte character string,
beginning and ending in its initial shift state. It contains two types
of objects: plain characters, which are simply copied to the output
stream, and conversion specifications, each of which results in fetching
of zero or more args. The results are undefined if there are
insufficient args for the format. If the format is exhausted while args
remain, the excess args are simply ignored.
Each conversion specification is introduced by the character %. After
the %, the following appear in sequence:
Zero or more flags, which modify the meaning of the conversion
specification.
An optional decimal digit string specifying a minimum field width.
If the converted value has fewer characters than the field width, it
will be padded on the left (or right, if the left-adjustment flag
`-', described below, has been given) to the field width. The
padding is with blanks unless the field width digit string starts
with a zero, in which case the padding is with zeros.
A precision that gives the minimum number of digits to appear for
the d, i, o, u, x, or X conversions, the number of digits to appear
after the decimal point for the e, E, and f conversions, the maximum
number of significant digits for the g and G conversion, or the
maximum number of characters to be printed from a string in s
conversion. The precision takes the form of a period (.) followed
by a decimal digit string; a null digit string is treated as zero.
Padding specified by the precision overrides the padding specified
by the field width. If a precision appears with any other
conversion specifier, the behavior is undefined.
An optional h specifying that a following d, i, o, u, x, or X
conversion specifier applies to a short integer or unsigned short
integer arg, or specifying that a following n conversion specifier
applies to a pointer to a short integer. If an h appears with any
other conversion specifier, the behavior is undefined.
An optional l (ell) specifying that a following d, i, o, u, x, or X
conversion character applies to a long integer or unsigned long
integer arg. If an l appears with any other conversion specifier,
the behavior is undefined.
An optional L specifying that a following e, E, f, g, or G
conversion specifier applies to a long double arg. If an L appears
with any other conversion specifier, the behavior is undefined.
A character that indicates the type of conversion to be applied.
A field width or precision or both may be indicated by an asterisk (*)
instead of a digit string. In this case, an integer arg supplies the
field width or precision. The arg that is actually converted is not
fetched until the conversion letter is seen, so the args specifying field
width or precision must appear before the arg (if any) to be converted.
A negative field width argument is taken as a `-' flag followed by a
positive field width. If the precision argument is negative, it will be
changed to zero.
The flag characters and their meanings are:
- The result of the conversion will be left-justified within the
field.
+ The result of a signed conversion will always begin with a sign
(+ or -).
blank If the first character of a signed conversion is not a sign, a
blank will be prefixed to the result. This implies that if the
blank and + flags both appear, the blank flag will be ignored.
# This flag specifies that the value is to be converted to an
"alternate form." For c, d, i, s, and u conversions, the flag
has no effect. For o conversion, it increases the precision to
force the first digit of the result to be a zero. For x or X
conversion, a nonzero result will have 0x or 0X prefixed to it.
For e, E, f, g, and G conversions, the result will always contain
a decimal point, even if no digits follow the point (normally, a
decimal point appears in the result of these conversions only if
a digit follows it). For g and G conversions, trailing zeros
will not be removed from the result (which they normally are).
The conversion characters and their meanings are:
d,i,o,u,x,X The integer arg is converted to signed decimal (d or i),
unsigned octal, (o), decimal (u), or hexadecimal notation
(x or X), respectively; the letters abcdef are used for x
conversion and the letters ABCDEF for X conversion. The
precision specifies the minimum number of digits to appear;
if the value being converted can be represented in fewer
digits, it will be expanded with leading zeros. The
default precision is 1. The result of converting a zero
value with a precision of zero is a null string.
f The float or double arg is converted to decimal notation in
the style "[-]ddd.ddd," where the number of digits after
the decimal point is equal to the precision specification.
If the precision is missing, six digits are output; if the
precision is explicitly 0 and the # flag is not specified,
no decimal point appears. If a decimal point character
appears, at least one digit appears before it. The value
is rounded to the appropriate number of digits.
e,E The float or double arg is converted in the style
"[-]d.ddde+dd," where there is one digit before the decimal
point and the number of digits after it is equal to the
precision; when the precision is missing, six digits are
produced; if the precision is zero and the # is not
specified, no decimal point appears. The value is rounded
to the appropriate number of digits. The E format code
will produce a number with E instead of e introducing the
exponent. The exponent always contains at least two
digits.
g,G The float or double arg is printed in style f or e (or in
style E in the case of a G format code), with the precision
specifying the number of significant digits. The style
used depends on the value converted: style e will be used
only if the exponent resulting from the conversion is less
than -4 or greater than the precision. Trailing zeros are
removed from the result; a decimal point appears only if it
is followed by a digit.
c The int arg is converted to an unsigned char and the
resulting character is printed.
s The arg is taken to be a string (character pointer) and
characters from the string are printed until a null
character (\0) is encountered or the number of characters
indicated by the precision specification is reached. If
the precision is missing or is greater than the size of the
array, the array must contain a null character or the
behavior is undefined.
p The value of the pointer-to-void arg is written out as
0xXXXXXXXX, where XXXXXXXX is an eight-digit hexadecimal
number in which any alphabetic digits appear in lowercase.
n arg points to an integer into which is copied the number of
characters written to the output stream so far by this
call. No argument is converted.
% Print a %; no argument is converted.
If any argument is, or points to, a union or an aggregate (except for an
array of character type using %s conversion, or a pointer using %p
conversion), the behavior is undefined. If, in the case of sprintf,
copying takes place between objects that overlap, the behavior is
undefined.
In printing floating point types (float and double), if the exponent is
0x7FF and the mantissa is not equal to zero, then the output is
[-]NaN0xdddddddd
where 0xdddddddd is the hexadecimal representation of the leftmost 32
bits of the mantissa. If the mantissa is zero, the output is
[+]inf.
In no case does a non-existent or small field width cause truncation of a
field; if the result of a conversion is wider than the field width, the
field is simply expanded to contain the conversion result. Characters
generated by printf and fprintf are printed as if putc(3S) had been
called.
EXAMPLES
To print a date and time in the form "Sunday, July 3, 10:02," where
weekday and month are pointers to null terminated strings:
printf("%s, %s %i, %d:%.2d", weekday, month, day, hour, min);
To print pi to 5 decimal places:
printf("pi = %.5f", 4 * atan(1.0));
SEE ALSO
ecvt(3C), putc(3S), scanf(3S), stdio(3S).
NOTE
Parts of this discussion are adapted from ANS X3.159-1989.