commands — Apollo

4.0;em3270 (emulate_3270), revision 4.0, 82/03/27



The EM3270 Commands are:

Help                Display this help information.
LIne {1|2|3}        Select the SIO line. Default is 1.
Quit                Exit from EM3270.
SPEED n             Set SIO line speed.  Valid speeds are 50, 75, 110, 134, 150,
                    300, 600, 1200, 2000, 2400, 3600, 4800, 7200, 9600, and 19200.
SYNC                Enable XON/XOFF on the SIO line.
NOSYNC              Disable XON/XOFF on the SIO line.

Use CNTRL F8 to switch between command mode and Remote 3270 mode.
Use CNTRL F7 to display a layout of the 3270 emulation keyboard.
Museum
